• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.4
• /
• pp.439-446
• /
• 2007

This study was performed to investigate the effect of long-term administration of Saengshik on growth parameters of growing rats. Male Sprague-Dawley rats were fed on AIN-93G basal diets for 12 weeks and assigned to the following groups: rats administrated orally with Saengshik at the dose of 1g/kg/day (1xJS ), 2g/kg/day (2xJS), 4g/kg/day (4xJS) and distilled water (Control). Rats were sacrificed at 4, 8, 12 weeks after oral administration. Bone mineral density (BMD) and bone mineral contents (BMC) were measured by PIXImus densitometry and serum insulin-like growth factor-1 (IGF-1) concentration were determined by using EIA method. Body weight and food intake did not show significant changes within groups for 12 weeks. Physical longitudinal growth indexes, body length and femur length were significantly increased in Saengshik-administered groups at 12 weeks, in which BMD and BMC also significantly increased. Also, in blood IGF-1 level, Saengshik-administered groups were remarkedly higher than control group at 4 week (p<0.001), in which significantly higher at 8 week and 12 week. These results suggest a close relation between administration of Saengshik and increment of longitudingal bone growth. Therefore, as the result of this study, it could be expected that the administration of Saengshik for 12 weeks is helpful to the increase of longitudinal growth and growth factors in rats. Furthermore, we propose that the consumption of Saengshik as dietary supplementation may promote to increase in longitudinal bone growth in growing children.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.3
• /
• pp.283-291
• /
• 1993

Background: Long-term low flow oxygen therapy not only increases survival, but also improves the quality of life in patients with chronic obstructive pulmonary disease (COPD) with chronic hypoxemia. For the assessment and improvement of the status of home oxygen therapy, we analyzed clinical experience of 26 patients who have been administered low flow oxygen at home. Method: Twenty-six patients (18 men and 8 women) who have been received long-term oxygen therapy (LTOT) at home were examined. We reviewed physical characteristics, clinical history, pulmonary function test, ECG, arterial blood gas analysis, hemoglobin and hematocrit, types of oxygen devices, inhalation time per day, concentration of administered $O_2$, duration of $O_2$ therapy, and problems in the home oxygen therapy. Results: The underlying diseases of patients were COPD 14 cases, far advanced old pulmonary tuberculosis 9 cases, bronchiectasis 2 cases, and idiopathic pulmonary fibrosis 1 case. The reasons for LTOT at home were noted for cor pulmonale 21 cases, for dyspnea on exertion and severe ventilatory impairment 4 cases, and for oxygen desaturation during sleep 1 case. The mean values of aterial blood gas analysis before home oxygen therapy were $PaO_2$ 57.7 mmHg, $PaCO_2$ 48.2 mmHg, and $SaO_2$ 87.7%. And the mean values of each parameters in the pulmonary function test were VC 2.05 L, $FEV_1$ 0.92 L, and $FEV_1$/FVC% 51.9%. Nineteen patients have used oxygen tanks as oxygen devices, 1 patient oxygen concentrator, 2 patients oxygen tank and liquid oxygen, and other 4 patients oxygen tank together with portable oxygen. The duration of oxygen therapy was below 1 year in 3 cases, 1~2 years in 15 cases, 3~5 years in 6 cases, 9 years in 1 case, and 10 years in 1 case. All patients have inhalated oxygen with flow rate less than 2.5 L/min. And only 10 patients have inhalated oxygen more than 15 hours per day, but most of them short time per day. Conclusion: For the effective oxygen administration, it is necessary that education for long-term low flow oxygen therapy to patients, their family and neighbor should be done, and also the institutional backup for getting convenient oxygen devices is required.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.401-412
• /
• 2016

It is extremely difficult to apply conventional grouting methods to subsea tunnelling construction in the high water pressure condition. In such a condition, the rapid artificial freezing method can be an alternative to grouting to form a watertight zone around freezing pipes. For a proper design of the artificial freezing method, the influence of salinity on the freezing process has to be considered. However, there are few domestic tunnel construction that adopted the artificial freezing method, and influential factors on the freezing of the soil are not clearly identified. In this paper, a series of laboratory experiments were performed to identify the physical characteristics of frozen soil. Thermal conductivity of the frozen and unfrozen soil samples was measured through the thermal sensor adopting transient hot-wire method. Moreover, a lab-scale freezing chamber was devised to simulate freezing process of silica sand with consideration of the salinity of pore-water. The temperature in the silica sand sample was measured during the freezing process to evaluate the effect of pore-water salinity on the frozen rate that is one of the key parameters in designing the artificial freezing method in subsea tunnelling. In case of unfrozen soil, the soil samples saturated with fresh water (salinity of 0%) and brine water (salinity of 3.5%) showed a similar value of thermal conductivity. However, the frozen soil sample saturated with brine water led to the thermal conductivity notably higher than that of fresh water, which corresponds to the fact that the freezing rate of brine water was greater than that of fresh water in the freezing chamber test.

• Korean Journal of Ecology and Environment
• /
• v.38 no.4 s.114
• /
• pp.461-474
• /
• 2005

Physicochemical parameters, plankton community structure, and sediment were surveyed from 1988 to 2002, at two months interval, in a eutrophic coastal lagoon (Lake Songji, Korea). The lake basin is separated from the sea by a narrow sand dune, and a shallow sill divides the lake basin into two sub-basins. The stable stratifications and chemoclines are maintained all through the year at 1-2 m depth. DO was often very low (<1 $mgO_2\;{\cdot}\;L^{-1}$) in the monimolimnion. Secchi disc transparency was in the range of 0.5-2.7 m. TP, TN, and Chl. a concentration in the mixolimnion were 0.015-0.396 $mgP\;{\cdot}\;L^{-1}$), 0.223-3.521 $mgN\;{\cdot}\;L^{-1}$, and 0.5-129.8 mg ${\cdot}\;m^{-3}$, respectively. TSI was in the eutrophic range of 54 to 62. Sediment was composed of silt and coarse silt. COD, TP, and TN content of the sediment were 51.4-116.9 $mgO_2\;{\cdot}\;gdw^{-1}$, 0.04-1.46 $mgP\;{\cdot}\;gdw^{-1}$ and, 0.12-1.03 $mgN\;{\cdot}\;gdw^{-1}$, respectively. The 49 phytoplankton species were identified. The maximum phytoplankton abundance obscured the lake in September 2001 (max. density: 23,350 cells ${\cdot}\;mL^{-1}$. The Chlorophyte Schroederia judayi was dominant species in summer (max. density: 20,417 cells ${\cdot}\;mL^{-1}$). The lake showed unique limnological features of a brackish lagoon in respect to biological community, chemical characteristics, and physical phenomena.

• Korean Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.382-394
• /
• 2008

The objective of this study was to analyze temporal trends of water chemistry and spatial heterogeneity between the dam site (Daecheong Reservoir, S1) and the downstream (S2$\sim$S4) using water quality dataset (obtained from the Ministry of Environment, Korea) during 2000$\sim$2007. Water quality, based on eight physical and chemical parameters, varied largely depending on the years, sampling sites, and the discharge volume. Conductivity and nutrients (TN and TP) showed a decreasing trend in the downstream (S4) rather than the dam site during the monsoon. Spatial variation increased toward downstream (S4) from Daecheong Reservoir (S1). Also, BOD and COD increased toward downstream. Because of input of nutrient and pollutant nearby S1, lentic ecosystem in monsoon, BOD and COD were slightly increased. whereas relatively decreased in S4, lotic ecosystem in monsoon, by dilution effect of nutrient and pollutant by discharge from upper dam, S1. Spatial variation of SS increased toward downstream (S4) by the side of Daecheong Reservoir (S1). Based on the dataset, efficient water quality management in the point source tributary streams is required for better water quality of downstream. Monthly characteristics of DO showed the lowest value in the monsoon that tend to increase water temperature. DO was lowest in October at S1 because turbid water, input to the Daecheong Reservoir in the monsoon affect to the postmonsoon period. In contrast, water temperature increased toward summer monsoon, in spite of some differences showed between S1 and S4 environment. Overall, the characteristics of water quality in downstream region have close correlation with discharge amount of Daecheong Reservoir. Thus, those characteristics can explain that discharge control of upper dam mainly affect to the water quality variation in downstream reach.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2012

To compare monthly variations of phytoplankton biomass and community composition between in seawater and sediment of the Gomso Bay (tidal flat: approximately 75%), the photosynthetic pigments were analyzed by HPLC every month in 1999 and every two months in 2000. Ambient physical and chemical parameters (temperature, salinity, nutrients, dissolved oxygen, and chemical oxygen demand) were also examined to find the environmental factors controlling structure of phytoplankton community. The temporal and spatial variations of chlorophyll a concentration in seawater were correlated well with the magnitude of freshwater discharge from land. The biomass of microphytobenthos at the surface sediments was lower than that in other regions of the world and 2-3 times lower than phytoplankton biomass integrated in the seawater column. Based on the results of HPLC pigment analysis, fucoxanthin, a marker pigment of diatoms, was the most prominent pigment and highly correlated with chlorophyll a in seawater and sediment of the Gomso Bay. These results suggest that diatoms are the predominant phytoplankton in seawater and sediment of the Gomso Bay. However, the monthly variation of chlorophyll a concentration in seawater at the subtidal zone was not a good correlation with that in sediment of the Gomso Bay. Although pelagic plankton was identified in seawater by microscopic examination, benthic algal species were not found in the seawater. These results suggest that contribution from the suspended microphytobenthos in the tidal flat to the subtidal zone of the Gomso Bay may be low as a food source to the primary consumer in the upper water column of the subtidal zone. Further study needs to elucidate the vertical and horizontal transport magnitude of the suspended microphytobenthos in the tidal flat to the subtidal zone.

• Korean journal of food and cookery science
• /
• v.21 no.1 s.85
• /
• pp.24-32
• /
• 2005

Changes in apple slices during cold storage were investigated by evaluating the physical properties such as degree of browning and compression force. Chemical properties such as PPO activity and total phenol contents were also determined and sensory evaluation was carried out. The correlation analysis between browning parameters was conducted. Degree of browning was increased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP(caramelization product) from sucrose-dipped apple slice. PPO activity was increased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP(caramelization product) from sucrose-dipped apple slice. Amongst several treatments, CP from sucrose-dipped apple slice showed the lowest degree of browning and PPO activity. Total phenol contents were decreased from 60 to 56.2 mg and from 59.6 to 56.0 mg in fresh apple slice and water-dipped apple slice, respectively, but CP from sucrose-dipped apple slice and $0.5\%$ ascorbic acid solution-dipped apple slice were increased from 51.9 to 52.8 mg and from 54.1 to 54.4 mg, respectively, showing the smallest changes when compared with fresh apple slice and water-dipped apple slice. Compression forces of apple slices during cold storage were decreased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP from sucrose-dipped apple slice. In sensory evaluation of apple slices during cold storage, CP from sucrose-dipped apple slice had higher score than the other treatments. In addition, a significant correlation was observed among degree of browning, PPO activity and phenol content. Therefore, CP from sucrose-dipped apple slice seems to be effective in controlling of enzymatic browning during cold storage. In addition, CP from sucrose-dipped apple slice seems to be effective on other several factors. These results suggest that CP from sucrose should be a potential source for controlling enzymatic browning during storage of vegetables and fruits.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.14-21
• /
• 2009

Purpose: To investigate MRI findings of the repaired anterior cruciate ligament (ACL). Materials and Methods: Seventeen of arthroscopic ACL primary repair with sutures pull-out technique were followed for 21.4 months (range: 12 to 60 months). Stability was assessed with physical examination and KT-1000 arthrometer (MED metric, San Diego, CA) and postoperative MRI checked with time. The patients were divided into 2 groups according to the location of tear which was defined with the location of remained synovial sleeve. Group I (11 patients) comprised that the tear was located within proximal 1/3 of ACL substance and group II (6 patients) comprised below proximal 1/3. MRI findings of the repaired ACL were evaluated by its course, sharpness, thickness and signal intensity using 3 grade system and correlated with its location of tear. Results: In all cases, Lachman test and flexion-rotation drawer test were negative, pivot-shift test was less than grade 1 and the mean side-to-side difference by use of KT-1000 arthrometer was 1.4 mm (range: -1.0 to 2.5 mm). The overall continuity of the repaired ACL was well maintained in all cases. However, mild sagging was observed in 10 cases(58.8%), mild obscure contour in 6 cases (35.3%), increased thickness in 8 cases (47.1%) and slight increased signal intensity in 5 cases (29.5%). There was no statistical significance in all parameters between 2 groups. And a focal defect at the femoral attachment site in sagittal image was observed in 7 cases (41.2%) of all patients which comprised 2 cases (18.2%) of group I and 5 cases (83.3%) of group II. It was observed more frequently in group II with statistical significance (p=0.035). Conclusion: Some abnormal MRI findings such as mild sagged course, obscure contour, increased thickness and signal intensity, the focal defect at femoral attachment site could be observed even though the stability was well maintained clinically. We thought that the focal defect was affected by the location of tear of ACL.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.2 no.1
• /
• pp.30-39
• /
• 1999

Purpose: Anorectal manometry is a way of investigation for ano-rectal sphincters. In this paper we evaluated the usefulness of anorectal manometry in constipation patients and compared the anal spnincter function in control, constipation and encopresis patients Methods: We analysed the data of anorectal function studies in normal children (control, n=11), children with constipation (constipation group, n=20) and children with encopresis (encopresis group, n=16). Results: The specific manometric parameters in normal children were like as follows; external anal sphinter pressure $21.0{\pm}8.00$ mmHg, internal anal sphicter pressure $30.0{\pm}14.57$ mmHg, conscious rectal sensitivity threshold $11.4{\pm}4.52$ mmHg. The above results were not different from that of previous studies except conscious rectal sensitivity threshold, which was slightly lower than that of others. Internal and external anal sphincter pressure were elevated significanlty in constipation and encopresis groups than in control, which results was the same in conscious rectal sensitivity threshold. But the values of rectoanal inhibitory threshold and percent relaxation of rectoanal inhibitory reflex were not different among control group, constipation group and encopresis group. External sphincter activity was increased during the act of bearing down for defecation in none of the child in control group, in 6 of 17 children in constipation group and 5 of 12 children in encopresis group. Conclusion: With the results of above we could say that complete history taking and physical examination are important in diagnosis of constipation, and we could say also that the anorectal manometry was a valuable tool to understand the physiology of normal defecation and the pathophysiology of constipation and encopresis.