• ETRI Journal
• /
• v.25 no.3
• /
• pp.149-155
• /
• 2003

A self-pulsating multisection distributed-feedback laser diode (DFB LD) can potentially realize all-optical clock extraction. This device generally consists of three sections, two DFB sections and one waveguide section. The most important variable in this device is detuning, which is the relative spectral position between the stop bands of two DFB sections. We fabricated a novel structure in which two gratings were located one over and one under the active layers. Each grating structure was independently defined in processing so that detuning, which is the prerequisite for self-pulsation, could be easily controlled. Observing various self-pulsating phenomena in these devices under several detuning conditions, we characterized the phenomena as dispersive Q-switching, mode beating, and self-mode-locking.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.149.2-149
• /
• 1998

• ETRI Journal
• /
• v.32 no.2
• /
• pp.319-326
• /
• 2010

Photonics offers a solution to data communication between logic devices in computing systems; however, the integration of photonic components into electronic chips is rather limited due to their size incompatibility. Dimensions of photonic components are therefore being forced to be scaled down dramatically to achieve a much higher system performance. To integrate these nano-photonic components, surface plasmon-polaritons and/or energy transfer mechanisms are used to form plasmonic chips. In this paper, the operating principle of plasmonic waveguide devices is reviewed within the mid-infrared spectral region at the 2 ${\mu}m$ to 5 ${\mu}m$ range, including lossless signal propagation by introducing gain. Experimental results demonstrate that these plasmonic devices, of sizes approximately half of the operating free-space wavelengths, require less gain to achieve lossless propagation. Through optimization of device performance by means of methods such as the use of new plasmonic waveguide materials that exhibit a much lower minimal loss value, these plasmonic devices can significantly impact electronic systems used in data communications, signal processing, and sensors industries.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.909-915
• /
• 2021

GaAs on Si grown via metalorganic chemical vapor deposition is demonstrated using various Si substrate thicknesses and three types of dislocation filter layers (DFLs). The bowing was used to measure wafer-scale characteristics. The surface morphology and electron channeling contrast imaging (ECCI) were used to analyze the material quality of GaAs films. Only 3-㎛ bowing was observed using the 725-㎛-thick Si substrate. The bowing shows similar levels among the samples with DFLs, indicating that the Si substrate thickness mostly determines the bowing. According to the surface morphology and ECCI results, the compressive strained indium gallium arsenide/GaAs DFLs show an atomically flat surface with a root mean square value of 1.288 nm and minimum threading dislocation density (TDD) value of 2.4×10⁷ cm^-2. For lattice-matched DFLs, the indium gallium phosphide/GaAs DFLs are more effective in reducing the TDD than aluminum gallium arsenide/GaAs DFLs. Finally, we found that the strained DFLs can block propagate TDD effectively. The strained DFLs on the 725-㎛-thick Si substrate can be used for the large-scale integration of GaAs on Si with less bowing and low TDD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.12
• /
• pp.1045-1057
• /
• 2009

The authors investigated the InGaN/GaN multi-quantum well blue light emitting devices with the implementation of the photonic crystals fabricated at the top surface of p-GaN layer and the bottom interface of n-GaN layer. The top photonic crystals result in the lattice-dependent photoluminescence spectra at the wavelength of 450 nm and however, the bottom photonic crystal shows a big shift of the photoluminescence peak from 444 nm to 394 nm. The sample with the bottom photonic crystal structure also shows the lasing effect at the wavelength of 468 nm. Furthermore, the quality enhancement for the crystal growth of GaN thin film on the bottom photonic crystal comes from the modulated compressive stress which was measured by the micro-Raman spectroscopy.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.55.2-55
• /
• 1998

• Journal of the Optical Society of Korea
• /
• v.6 no.3
• /
• pp.96-99
• /
• 2002

We give a brief overview of nonlinear localized modes in photonic crystals. We explain how photonic crystals can potentially be important in making small scale active devices which operate in an all optical way. Two models to approach nonlinear photonic crystals, the coupled mode theory and the discrete lattice theory using a Green's function, are explained.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.55.1-55
• /
• 1998

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.105-108
• /
• 2007

Chiral liquid crystals exhibit band-gap structures responsive to electrical and optical fields, providing wide-ranging opportunities for photonics applications. We discuss three aspects of this technology: optics of chiral nematic devices and removal of pitch jumps; optical switching of chiral nematic materials; and using novel phases in photonic devices.

• Electronics and Telecommunications Trends
• /
• v.33 no.6
• /
• pp.81-93
• /
• 2018

Metamaterials are artificial media that can control the properties of waves at will. Active photonic metadevice technologies cover the device and material technologies that control the visible and IR light through an external signal (mainly an electrical signal). The application areas of active photonic metadevices are tremendous for example holography, active HOE, bio imaging, IR imaging, telecommunication, and optoelectronic devices. In this paper, the technical trends and prospects of active metamaterials, active meta holography, active meta devices, nano-optical telecommunication devices, and IR imaging meta devices are reviewed.