• 대한전자공학회논문지SD
• /
• 제42권3호
• /
• pp.17-24
• /
• 2005

본 논문에서는 단일모드 광섬유를 부착한 analog용 PIN-Photodiode를 제작하고 소자의 특성을 분석하였다. 제작된 analog 용 PIN-photodiode의 대역폭은 1.5 GHz이였으며, 암전류는 20 pA이고, 정전용량은 0.48 pF이였으며, 응답도(responsivity)는 0.9 V/W 이고, 2차 상호변조(IM2, second order distortion)는 -72 dBc이였다. 본 논문에서는 응답도와 IM2 특성을 실시간으로 모니터링하며 정렬하는 새로운 광 패키징 기술을 개발하였다. 그 결과 응답도는 0.03 V/W 향상되었으며, IM2는 $3\~5dBc$ 향상 되었고, 부적합 발생률도 $3.5\%$ 감소하였다.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.247-250
• /
• 2001

광이 입사되는 수광면에 그물망(web)모양의 얕은 $P^{+}$ -diffusion 영역을 갖는 새로운 구조의 적색광 검출 Si pin photodiode를 제작하고 그 특성을 분석하였다. 제작된 소자의 전기.광학적 특성을 -5V의 동작전압에서 측정한 결과, 접합 커패시턴스와 암전류는 각각 4pF와 235pA로 나타났으며 670nm의 중심파장을 갖는 1.6㎼의 입사광 전력 아래에서 광신호 전류와 감도특성은 각각 0.48$\mu\textrm{A}$와 0.30A/W로 나타났다. 제작된 소자는 종래의 circular type photodiode에 비해 개선된 감도 특성을 나타내었으며 670~700nm의 파장영역에서 최대 spectral response를 보였다. 본 연구에서의 web-patterned Si photodiode는 red light optics 응용에서 디지털 신호처리시 우수한 신호분리 능력을 나타낼 것으로 기대된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.509-512
• /
• 2004

This paper proposed a new solid State Relay(SSR) structure that can replace the conventional SSR as a power IC. The photodiode arrays, the main part of this structure, were designed and integrated in the same power It chip with the output parts, LDMOSFET and BJT, on a SOI substrate. The fabrication of this input part shared the same output LDMOSFET fabrication processs, except the additional deposition of Silicon nitride($Si_3N_4$) for the photo-detection part. According to LED illumination intensites and photo detecting areas, we could obtain voltage of 0.49V ${\~}$0.52V and current of 5.5uA ${\~}$ 108uA respectively from the fabricated unit photodiode. The maximum value of the voltage and the current we could obtain from the photodiode array were 3.58V and 24.4uA respectively, and the voltage was enough to operate the output LDMOSFET

• 한국광학회지
• /
• 제8권2호
• /
• pp.165-168
• /
• 1997

780 nm의 반도체 레이저, compact disk의 광 pick-up용 actuator, 그리고 4분할 photodiode를 이용하여 scanning confocal microscope를 구성하여 시료면의 높이와 재질의 차이를 측정하였다. 4분할 photodiode에 검출되는 오차 신호를 이용하여 렌즈가 장착되어 있는 actuator를 움직이면서 시료면에 레이저 광속의 초점이 항상 위치하도록 하였으며, 이 때 actuator에 흐르고 있는 전류를 시료면의 높이로 나타내어 3차원 영상으로 표현하였다. 또한 재질의 차이는 4분할 photodiode에 검출되는 합산 신호를 이용하여 컬러 프린터에 나타나는 3차원 영상의 색을 다르게 나타내었다. 전체적인 크기도 30 mm * 20 mm * 20 mm 로서 작고 간단하며 scan 영역은 최대 1.6 mm * 1.6 mm이다. 반사광의 세기를 이용한 scanning confocal microscope의 영상과 4분할 photodiode에 검출되는 오차 신호를 적분하는 방식을 이용한 scanning confocal microscope의 영상을 구하여 그 차이를 비교하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.135-138
• /
• 1991

A planar type PIN photodiode has been fabricated and discussed. We used OMVPE systems to grow the structure of u-InP/u-InP/n-InP. P-n junction was formed by Zn-diffusion method at 50$0^{\circ}C$, for 5 minitues. The device characteristics at 5V were as follows: Dark currents were distributed around 1nA. Capacitance was 1.6pF and responsivity was above 0.85 mA/mW for 1.3${\mu}{\textrm}{m}$ wavelength. Measured cut-off frequency(-3dB) at -5V was 1.1㎓.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.270-273
• /
• 2000

We have fabricated and analyzed photodiodes for optical link with Si pin structures. As the results of experiment, the web patterned photodiode(type C) with $p^{+}$-guard ring showed low junction capacitance of 6~7 pF at $V_{R}$=-5V and high separation ability for optical signal(dark current : $\leq$ 5 nA, optical signal current : $\geq$ 340 nA) due to the small effective $p^{+}$-n junction area and the expanded electric field region. The fabricated Si pin photodiode can be applicable for detecting an optical signal with the wavelength of about 660~670 nm. It can also be integrated with the twin well CMOS structure to develope an one chip based optical receiver IC. IC.C.

• 센서학회지
• /
• 제20권1호
• /
• pp.14-18
• /
• 2011

An analytical pinning-voltage model of a pinned photodiode has been proposed and derived. The pinning-voltage is calculated using doping profiles based on shallow- and exponential-junction approximations. Therefore, the derived pinning-voltage model is analytically expressed in terms of the process parameters of the implantation. Good agreement between the proposed model and simulated results has been obtained. Consequently, the proposed model can be used to predict the pinning-voltage and related performance of a pinned photodiode in a CMOS active pixel sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2285-2288
• /
• 2002

Recently, electronic personal dosimeters based upon silicon PIN photodiode or miniature GM tube were developed and have attracted a lot of attention because of the advantages of their nature such as indication of dose rate and the cumulative dose, and facilitation of record keeping. In this paper, we have developed a high-sensitivity electronic personal dosimeter with silicon PIN photodiode. The electronic personal dosimeter is constructed with silicon PIN photodiode, preamplifier, and shaping amplifier. To show the effectiveness of electronic personal dosimeter, we conducted nuclear radiation experiments using $\gamma$-ray Ba-133, Cs-137, and Co-60. The electronic personal dosimeter have a good linearity on $\gamma$-ray energy and activity.

• Journal of information and communication convergence engineering
• /
• 제1권1호
• /
• pp.23-26
• /
• 2003

A photodiode capable of obtaining a sufficient photo/dark current ratio at both a forward bias state and a reverse bias state is proposed. The photodiode includes a glass substrate, an aluminum film formed as a lower electrode over the glass substrate, an alumina film formed as a schottky barrier over the aluminum film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the alumina film, and a transparent conduction film formed as an upper electrode over the hydro-generated amorphous silicon film. Growth of high quality alumina($Al_{2}O_{3}$) film using anodizing technology is proposed and analyzed by experiment. We have obtained the film with a superior characteristics

• Journal of the Optical Society of Korea
• /
• 제3권1호
• /
• pp.27-31
• /
• 1999

The two-photon absorption of a SiC photodiode was utilized to obtain autocorrelation signals of the pulses from a mode-locked Rh6G dye laser. The autocorrelation signals were in good agreement with those obtained by a conventional autocorrelator using a second harmonic crystal and photomultiplier tube. The sensitivity of the autocorrelator with the SiC photodiode was about $4{\times}10^3 {(mW)}^2$ . From these results it was demonstrated that the SiC photodiode is suitable as a nonlinear device for an autocorrelation measurement in the visible range.