• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.11
• /
• pp.1095-1101
• /
• 2006

The clean tube system was developed as a means of transferring air-floated wafers inside a closed tube filled with super clean air. This paper presents a wafer position sensing method in the clean tube system, where the photo proximity sensors are used. The first presented method uses the two positions sensed lately in order to compute the wafer center position. The next method uses the latest sensed position and the next latest position compensated with the information of the wafer velocity. The third method uses the kalman filter, which enable us to use all the previous sensing information. The simulation results are compared to show results of the presented method. In addition, the paper presents a control method to stop the wafer at the center of the unit in the clean tube system. The experimental clean tube system worked successfully with the applying the both presented methods of sensing and control.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.382-384
• /
• 1994

Wireless communication has become a hot issue for its simplicity. Using light wave instead of micro wave has many advantages. It is simple to design a circuit because we can make a circuit with discrete components such as photo diode, photo detector, OP Amp[2]. And we can have many communication channels for we can use every frequency domain. In this paper, we design the wireless communication system and analyze the pulse signal. Then using ray tracing technology we simulate the distribution of light beam.

• Journal of the Korean Chemical Society
• /
• v.49 no.2
• /
• pp.201-207
• /
• 2005

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.204-207
• /
• 2003

PV model is presented based on the shockley diode equation. The simple model has a photo-current source, an single diode junction and a series resistance and includes temperature dependences. An accurate PV module electrical model is presented, matching with boost converter MPPT strategy and demonstrated in Matlab for a typical general purpose solar cell. Given solar insolation and temperature, the model returns current vector and MPP.

• 전기의세계
• /
• v.44 no.12
• /
• pp.25-30
• /
• 1995

광통신기술은 통신기술의 발달과정에서 1960년대에 등장한 새로운 통신기술로 몇 단계의 기술혁신을 거쳐 현재에 이르러는 보편화된 통신기술로 자리잡아 가고 있으며 2000년대 정보화 사회구축을 위한 핵심기술로 인식되고 있다. 이러한 광통신의 기본원리는 다음과 같다. 즉 우리가 통신에서 주로 이용하는 전화, 데이타, 영상정보등은 아날로그 또는 디지털 신호로서 이 신호들은 다중화 및 변조과정을 거쳐 고속전기신호를 구성하며, 이 고속전기신호를 광신호로 변환하는 반도체 레이저(LD: Laser Diode)에서 고속광 신호로 변환된다. 이 광신호는 전송손실이 매우 적은 광매체인 광섬유를 통해 40km - 100km 정도를 무중계로 전송된다. 전송된 미약한 광신호는 광검출기(PD:Photo Diode)에서 전기신호로 변환된 후 복조 및 역다중화과정을 거쳐 원래의 정보로 재현된다. 이러한 광통신원리를 이용한 광전송 기술은 기존의 동축이나 마이크로웨이브 전송기술에 비해 우수한 전송특성을 갖는다. 즉 광섬유가 가지는 거의 무한대의 전송대역폭(Bandwidth), 광소자의 높은 변조특성을 이용하여 현재에도 이미 10Gb/s급의 고속전송이 가능하며 2000년대 초반에는 수백 Gb/s급의 전송장치가 개발될 것으로 예상된다. 따라서 광전송기술은 현시대에 가장 경제적이고 신뢰성있는 통신수단으로 인식되고 있으며 초고속 정보 통신망 구축의 핵심기술이 될 것으로 예측된다. 이에 광전송기술의 발달과정, 차세대 광 전송기술 및 응용사례등을 살펴보고자 한다.

• Proceedings of the KIEE Conference
• /
• 2004.07e
• /
• pp.110-113
• /
• 2004

PV model is presented based on the shockley diode equation. The simple model has a photo-current source, an single diode junction and a series resistance and includes temperature dependences. An accurate PV module electrical model is presented, matching with boost converter MPPT strategy and demosnstarted in Matlab for a typical general purpose solar cell. Given solar insolation and temperature, the model returns current vector and MPP.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.53-58
• /
• 2010

In this paper, the output characteristics of PSD(Position Sensetive Detector) used in measurement system are described. Most of the precision measurment systems are accomplished by a laser diode(LD), a photo diode(PD) and PSD(Position Sensetive Detector), which are used in reflection of mirror or projection of infrared spectrometer. But it is especially restricted by resolution of PD and PSD in nano-measurement. A new inclined light methods into the PSD are employed in the surface measurement system for increasing the resolution. As the results, we can know that the output characteristics of detective senser (PSD) become more than 2 or 3 times by changing inclined angle(range: 5 degree) compared with common angle. In addition, the experiment results are confirmed that the change of inclined angle is not affecting to the linearity and repeating.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.68-69
• /
• 2009

Heat Assisted Magnetic Recording (HAMR) is one of the most promising candidates for high density magnetic storages over 1 Tb/$in^2$ areal density. Since the precise light delivery to the head is a key factor to realize HAMR application, it is required to establish the light delivery using micro laser module and micro actuator. For the careful control of micro actuator, a laser module was designed including laser diode, optical fiber, collimating lens, and fabricated V-groove substrate. In addition, the basic aligning method between the laser module and HAMR head was studied by the detection of current change in photo diode due to the amount of reflected light from the head.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05c
• /
• pp.17-20
• /
• 2004

PV model is presented based on the shockley diode equation. The simple model has a photo-current source, an single diode junction and a series resistance and includes temperature dependences. An accurate PV module electrical model is presented, matching with boost converter MPPT strategy and demosntarted in Matlab for a typical general purpose solar cell. Given solar insolation and temperature, the model returns current vector and MPP.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.37-44
• /
• 2005

This paper presents fabrication techniques of the optical fiber position sensor (or spindle state monitoring. These include selection of components such as optical fibers, a laser-diode, a photo-diode, and op-amp IC of the signal process circuit. We also describe electric runout problem. The fabricated sensor has a linearity of $1.7\%$ FSO in the air gap range $0.1\~0.6mm$, a resolution of $0.37{\mu}m$ and a bandwidth of 6.3kHz. Finally, we have successfully operated a magnetic bearing spindle system using the sensors.