• 폴리머
• /
• 제37권2호
• /
• pp.196-203
• /
• 2013

Surface modification of meta-aramid fibers was performed by phosphoric acid treatment. Surface morphology and element composition of untreated and treated fibers were analyzed by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). Effects of surface modification on the mechanical strength of aramid papers made from meta-aramid fibers and fibrid were investigated. Surface modification conditions were optimized by response surface analysis (RSA). Results show that phosphoric acid treatment increases the surface roughness and oxygen content of aramid fibers. They improve the interface bonding strength between aramid fibers and fibrid, which improves the tensile strength of aramid papers. The results of response surface analysis indicate that the tensile strength of aramid papers increases by 47.5% and reaches the maximum when meta-aramid fibers are treated with 21.1wt% phosphoric acid solution at $39.3^{\circ}C$ for 36.7 min.

• 청정기술
• /
• 제15권4호
• /
• pp.253-257
• /
• 2009

LCD 제조공정에서 배출되는 질산과 초산, 인산, 그리고 Al과 같은 금속이온을 함유한 폐에칭액으로부터 진공증발과 확산투석을 이용하여 고순도 인산을 회수하여 인산암모늄을 제조하고자 하였다. 진공증발을 이용하여 질산과 초산을 제거하였다. 진공도가 -650 mmHg인 경우에는 온도 413 K 이상에서 완전 분리되었고, 진공도가 -700 mmHg인 경우에는 온도 393 K 이상의 영역에서 완전히 분리되었다. 그리고 진공도 -730 mmHg의 경우는 온도 383 K 이상에서도 완전 분리가 가능하였다. 99%의 질산과 초산을 제거하였으며, 확산투석을 이용하여 약 97.5% 이상의 Al을 제거하였다. 이렇게 얻어진 고순도 인산과 수산화암모늄을 이용하여 일인산암모늄을 제조하는 공정에서 급격한 발열반응을 제어하고 안정된 적정조건을 도출하기 위하여 수산화암모늄의 농도, 적정 몰비, pH, 온도 등의 반응인자를 조절하여 회수율 약 90%의 일인산암모늄을 제조하였다.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.107-113
• /
• 1982

The purpose of this study was to observe the tensile strength of composite resins to etched dentin surface with the various methods of placing bonding agent before composite resin or placing composite resin alone. Recently extracted 60 maxillary incisors were chosen. These were divided into 6 groups: Group I : Immediate Silar adaptation to the etched dentin surface with 37% phosphoric acid for 60 seconds without bonding agent. Group II : Immediate Silar adaptation to the etched dentin surface with 37% phosphoric acid for 60 seconds with bonding agent. Group III : Silar adaptation to the etched dentin surface with 37% phosphoric acid for 60 seconds after 5 minutes of bonding agent. Group IV : Immediate Enamelite adaptation to the etched dentin surfaces with 50% phosphoric acid for 120 seconds without bonding agent. Group V : Immediate Enamelite adaptation to the etched dentin surface with 50% phosphoric acid for 120 second s with bonding again. Group VI : Enamelite adaptation to the etched dentin surface with 50% phosphoric acid for 120 seconds after 5 minutes of bonding agent. All specimens were immersed in water at $37^{\circ}C$ for 24 hours before testing. The results were as follows: 1. The tensile strength of powder/liquid composite resin system was higher than that of pastel paste composite resin system. 2. The tensile strength of the composite resin group II, III, V, & VI with bonding agent was higher than that of the composite resin group I & IV without bonding agent. 3. The tensile strength of the composite resin group III & VI after 5 minutes added to bonding agent was higher than that of the composite resin group II & V immediately added to bonding agent.

• 접착 및 계면
• /
• 제5권3호
• /
• pp.10-17
• /
• 2004

본 연구에서는 레이온직물에 대하여 승온속도, 안정화온도, 분위기가스, 화학적 표면처리 등 여러가지 조건에서 안정화공정을 행한 후, 직물의 열수축과 열안정성, 그리고 미세구조에 미치는 공정 조건의 영향을 조사하였다. 레이온직물의 열수축과 중량변화에 인산처리 유무와 승온속도가 가장 중요한 영향을 미쳤다. 특히, 인산처리를 한 경우가 하지 않은 경우보다 레이온직물의 두께변화는 약 80%, 길이변화는 약 20%, 그리고 중량변화는 약 26%가 줄어드는 열수축 억제 효과를 보여주었다. 안정화 된 레이온직물의 열안정성에는 안정화온도와 인산처리 그리고 분위기가스와 승온속도 등 주어진 안정화공정 조건 모두가 영향을 주었다. 또한 안정화섬유의 표면 상태 및 섬유직경 변화도 공정 전에 행한 인산처리의 유무에 의존하였다.

• 대한치과교정학회지
• /
• 제32권1호통권90호
• /
• pp.51-57
• /
• 2002

이번 연구의 목적은 3가지의 서로 다른 법랑질 표면처리용액을 사용하였을 때 각각의 경우 전단결합강도를 실험실에서 측정하고 비교해보는 것이다. (1)30% sulfated polyacrylic acid with 0.3M lithium sulfate (2)40% sulfated polyacrylic acid with 0.3M lithium sulfate (3)37% phosphoric acid. 105개의 사람의 소구치를 35개씩 3개의 군으로 분류하였다. 3가지의 준비된 용액을 분류된 각 군에 적용하고 동일한 자가 중합 레진을 사용하여 금속 브라켓을 부착하였다. 각각의 치아마다 전단결합강도를 측정하였다. 브라켓을 제거한후 법랑질표면과 브라켓 베이스의 파절양상을 입체현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. 30%와 40% 폴리 아크릴산을 사용한 군에서 측정된 전단결합강도는 37% 인산을 사용한 그룹의 2/3수준으로 임상적응용이 가능한 수준이었으나 충분하지는 않았다. 2. 폴리아크릴산 그룹간의 전단결합강도에서는 통계학적으로 유의성이 없었다. 3. 브라켓의 탈락양상을 관찰한 결과 폴리아크릴산을 사용한 군에서는 브라켓과 접착제간의 파절보다 접착제와 법랑질간의 파절빈도가 높았다. 인산을 사용한 군에서는 폴리아크릴산의 군과 반대로 관찰되었다. 이상의 결과로 볼 때 폴리아크릴산을 임상에 사용하려면 전단결합강도를 높일 수 있는 연구가 선행되어야 할것으로 사료된다.

• 대한소아치과학회지
• /
• 제10권1호
• /
• pp.85-93
• /
• 1983

In one group that tested for the effects of grinding and etching on the deciduous teeth, S.E.M. examination on the ground or unground labial surface of deciduous maxillary central incisors were made after etching procedure with 40% phosphoric acid for 60 secs., 120 secs., 180 sees. each. In another group that tested for the degree of resin penetration to the ground and etched deciduous teeth, composite resin application was done to the ground deciduous maxillary central incisors that had been acid-etched for 30 secs., 60 secs., 90 sees., 120 sees., 180 secs. each. The tooth-resin specimens were cut at the middle 1/3 of the crown by 2mm thickness, and the adjacent tooth materials were demineralized by 10% hydrochloric acid, the author observed the tags of the resin replica with S.E.M.. Following results were obtained. 1. After 40% phosphoric acid etching, the unground deciduous enamel surface showed various types of etching pattern. 2. For the formation of regular micropores on deciduous enamel surface by acid etching with 40% phosphoric acid, the time over 120 secs. should be requested. 3. After 40% phosphoric acid etching, the ground deciduous enamel surface showed the same etching pattern that has been a preferential removal of prism peripheries despite different etching time. 4. On the ground group that etched over 60 secs. to 180 secs., the length of tags was $5{\mu}m$ to $8{\mu}m$, with a mean of $7{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• 제34권1호
• /
• pp.38-41
• /
• 2009

복합레진 수복을 위해 상아질에 total-etch adhesive system을 적용할 경우, 37% 인산 산부식제가 널리 사용되고 있다. 37% 인산은 매우 강력한 부식제로 구강점막이나 안면피부와 접촉되었을 때 심각한 해로운 효과가 발생될 수 있다. 이 증례 보고에서는 복합레진 수복과정에서 사용된 인산 산부식제에 의해 안면피부에 발생된 의원성 화학적 화상을 보고하고자 한다. 산부식제에 의한 화학적 화상은 산부식제를 부주의하고 부적절하게 사용함으로 발생될 수 있으며, 이러한 의원성 손상을 방지하기 위해서는 산부식과 수세과정 후 산부식제가 완전히 제거되었는지를 확인하여야하며, 복합레진 수복 시 러버댐이나 적절한 격리 기구를 사용하는 것이 필요할 것이다. 화상이 발생하였다면, 적절한 응급처치 후 피부과로 의뢰하는 것이 필요할 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1902-1906
• /
• 2011

Sulfonated poly(fluorinated arylene ether)s (SDF-F)/poly[(N-vinylimidazole)-co-(3-methacryloxypropyl-trimethoxysilane)] (poly(VI-co-MPS))/poly(tetrafluoroethylene) (PTFE) is prepared for a high temperature proton exchange membrane fuel cell (PEMFC). The reaction of the membrane with phosphoric acid forms silicate phosphor, as a chemically bound proton carrier, in the membrane. Thus-formed silicate phosphor, nitrogen in the imidazole ring, and physically bound phosphoric acid act as proton carriers in the membrane. The physico-chemical and electrochemical properties of the membrane are investigated by various analytical tools. The phosphoric acid uptake and proton conductivity of the SDF-F/poly(VI-co-MPS)/PTFE membrane are higher than those of SDF-F/PVI/PTFE. The power densities of cells with SDF-F/poly(VI-co-MPS)/PTFE membranes at 0.6 V are 286, 302, and 320 mW $cm^{-2}$ at 150, 170, and 190 $^{\circ}C$, respectively. Overall, the SDFF/poly(VI-co-MPS)/PTFE membrane is one of the candidates for anhydrous HT-PEMFCs with enhanced mechanical strength and improved cell performance.

• Corrosion Science and Technology
• /
• 제4권5호
• /
• pp.191-200
• /
• 2005

Two azole compounds viz., Imidazole (IM) and 2-Methylimidazole (2-MIM) were studied to investigate their inhibiting action on corrosion of mild steel in phosphoric acid ($H_3PO_4$) solution by mass loss and polarization techniques at 302K-333K. It has been found that the inhibition efficiency of the all inhibitors increased with increase in inhibitor concentration and decreases with increasing temperature and also with increase in acid concentrations. The inhibition efficiency of these compounds showed very good inhibition efficiency. At 0.5% of IM and 2-MIM in 1N and 5N phosphoric acid solution at 302K to 333K for 5 hours immersion period, the inhibition efficiency of 2-Methylimidazole found to be higher than Imidazole. The adsorption of these compounds on the mild steel surface from the acids has been found to obey Tempkin's adsorption isotherm. The values of activation energy ($E{\alpha}$) and free energy of adsorption (${\Delta}G{\alpha}ds$) were also calculated. The plots of log $W_f$ against time (days) at 302K give straight line which suggested that it obeys first order kinetics and also calculate the rate constant k and half life time $t_{1/2}$. Surface was analyzed by SEM and FITR spectroscopy.

• 한국식품조리과학회지
• /
• 제23권1호통권97호
• /
• pp.150-155
• /
• 2007

This work was conducted to obtain a rapid, accurate, and precise procedure for free amino acids analysis in Doenjang with HPLC-OPA (high performance liquid chromatography using-phthalaldehyde) and AAA (automatic amino acid analyzer) methods. Different sample extraction procedures among water, 0.1 M perchloric acid, and 0.1% meta-phosphoric acid were also compared. The optimal extraction solvent was 0.1% meta-phosphoric acid for both the HPLC-OPA and AAA methods. Good recoveries for glycine and methionine were observed using the 0.1% meta-phosphoric acid extraction with HPLC-OPA method. Method precisions (% relative standard deviation) for the free amino acids ranged for 1.62% to 8.27%, in which the HPLC-OPA method with water extraction showed the lowest value at 1.62%. Inhibition rates of the free amino acids in Doenjang were greatest with an addition of NaCI at a 1% concentration.