• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.47-56
• /
• 2006

Improvements are made to existing primitive cell volume measurement method to provide a real-time analysis capability for the phase analysis of nanocrystalline materials. Simplification is introduced in the primitive cell volume calculation leading to fast and reliable method for nano-phase identification and is applied to the phase analysis of Mo-Si-N nanocoating layer. In addition, comparison is made between real-time and film measurements for their accuracy of calculated primitive cell volume values and factors governing the accuracy of the method are determined. About 5% accuracy in primitive cell determination is obtained from camera length calibration and this technique is used to investigate the cell volume variation in WC-TiC core-shell microstructure. In addition to chemical compositional variation in core-shell type structure, primitive cell volume variation reveals additional information on lattice coherency strain across the interface.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.171-174
• /
• 1999

The torque of SRM is developed by phase currents and inductance variation. Phase currents and inductance variation. Phase current is often the controlled variable in electrical motor drives, so it seems natural to use closed loop current controllers. However, the highly nonlinear nature of switched reluctance motors makes optimisation of closed loop current controlled difficult because of saturation effect in magnetic circuit. Therefore, torque generation region is nonlinearly varied according to phase current and rotor position. This paper describes the torque control scheme with neural network that can control varied with load torque. The torque control is simulated by PSIM.

• 한국광학회지
• /
• 제17권6호
• /
• pp.548-555
• /
• 2006

양 단면 반사율과 단면 회절격자 위상, 위상 조정 영역의 위상이 두 개의 DFB 영역과, 가운데 위상 조정 영역을 가진 다중 영역 Index-Coupled DFB 레이저의 Self-Pulsation동작 특성에 미치는 영향을 수율 관점에서 살펴보았다. 결합세기가 작을수록 양 단면 반사율이 증가할 때 양 단면과 다른 DFB 영역에서 반사되는 필드가 모드의 특성에 미치는 영향이 커져 양 단면 회절격자 위상 변화에 따른 발진 모드의 호핑이 많이 발생하고 수율이 감소한다. 결합세기가 클수록 양 단면 반사율이 증가하여도 양 단면과 다른 DFB 영역에서 반사되는 필드가 모드의 특성에 미치는 영향이 작아 양 단면 회절격자 위상 변화에 따른 모드의 호핑은 적게 발생하나 Spatial Hole Burning 효과가 증가하여 수율이 감소하는 것을 볼 수 있었다. 결합세기에 상관없이 단면 반사율이 증가할수록 최대 수율과 수율이 40% 이상 되는 위상 조정 영역의 위상 범위가 감소함을 볼 수 있었다. 또한 결합세기가 클수록 위상 조정 영역의 위상 변화에 따른 수율의 변화가 커지고 단면 반사율의 변화에 따른 최대 수율을 주는 위상 조정 영역의 위상 값의 변화가 작음을 볼 수 있었다. 결합세기가 2와 3일 경우가 1.2와 4인 경우에 비하여 수율 특성이 좋음을 볼 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.843-846
• /
• 2004

Cavity tone is generated due to the feedback between flow and acoustic wave. It is recognized that the period is determined by the time required for the flow convection in one direction, the time required for the acoustic propagation in the other direction and the time for phase shift depending on the flows and mode. Most of the phenomena have been investigated by experiments and a simple but fundamental theory. But the cause of the phase shift and the correctness of the theory have not been clearly explained so far. In this paper, the phenomena are calculated numerically to obtain detail information of flow and acoustic wave to explain the mechanism including the phase. High order high resolution scheme of optimized high order compact is used to resolve the small acoustic quantities and large flow quantities at the same time. The data are reduced using cross correlation function in space and time and cross spectral density function which has phase information. Abrupt change in pressure near corner in cavity is observed and is relate to phase variation. The time required for the feedback between the flow and acoustic wave is calculated after the numerical simulation f3r various modes. The periods based on the time calculated using the above method and direct observation from the acoustic waves generated and propagated in the numerical simulation are compared. It is found that no phase shift is required if we examine the time required carefully. Rossiter's formula for the cavity tone used for quick estimation needs to be modified far some modes.

• 한국음향학회지
• /
• 제18권3호
• /
• pp.55-61
• /
• 1999

본 연구에서는 쿼드러춰 방식의 초음파현미경을 구성하고 미세한 높이변화를 갖는 표면결함에 대한 진폭영상과 위상영상을 복원하여 상대적인 영상 강도의 변화와 영상의 질을 비교 분석하였다. 본 실험에서는 중심주파수가 3㎒인 focused 변환기를 사용하여 초음파현미경을 구성하고 알루미늄 재료를 선택하여 하나는 직경이 2㎜이고 깊이가 100㎛인 원형결함을 갖도록 하였고 다른 하나는 직경이 4㎜이고 깊이가 5㎜인 원형결함을 갖도록 시편을 제작하였으며 이들에 대한 진폭과 위상영상을 복원하였다. 결함 깊이가 100㎛인 원형결함이 존재하는 시편에 대한 라인 스캔(line scan) 결과 상대적인 영상강도의 진폭 변동율은 7%로 미약한 반면에 위상 변동율은 89%로 커다란 변화를 나타내므로 결함에 대해서 위상영상이 우수한 콘트라스트를 보였다. 이에 비하여 결함의 깊이가 5㎜인 시편에 대해서 진폭영상은 위상영상에 비하여 우수한 콘트라스트를 보이므로서 결함 깊이가 한 파장을 기준으로하여 위상영상과 진폭영상은 큰 차이를 나타내었다. 따라서 쿼드러춰 검출방식의 초음파현미경은 진폭만을 검출하는 포락선 검출기에 비해 한 파장보다 작은 높이변화를 갖는 결함의 탐상시 위상영상을 진폭영상의 상호보완적인 관계로 사용하므로서 결함의 미세 높이 변동을 효율적으로 평가 할 수 있다.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.203-209
• /
• 2010

This paper describes the development of a three-phase line-interactive DVR with a new sag detection algorithm. The developed detection algorithm has a hybrid structure composed of an instantaneous detector and RMS-variation detectors. The source voltage passes through the sliding-window DFT and RMS calculator, and the instantaneous sag detector. If an instantaneous sag is detected, the RMS variation detector-1 is selected to calculate the RMS variation. The RMS variation detector-2 is selected when the instantaneous sag occurs under the operation of the RMS variation detector-1. The feasibility of the proposed algorithm is verified through computer simulations and experimental work with a prototype of a line-interactive DVR with a 3kVA rating. The line-interactive DVR with the proposed algorithm can compensate for an input voltage sag or an interruption within a 2ms delay. The developed DVR can effectively compensate for a voltage sag or interruption in sensitive loads, such as computers, communications equipment, and automation equipment.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.165-171
• /
• 2007

This paper proposes a new islanding detection method for inverter-interfaced distributed generators (DG). To detect islanding conditions, this paper calculates the phase angle variation of the system voltage by using the phase-locked loop (PLL) in the inverter controllers. Because almost all inverter systems are equipped with the PLL, the implementation of this method is fairly simple and economical for inverter-interfaced DGs. The detection time can also be shortened by reducing communication delay between the relays and the DGs. The proposed method is based on the fact that islanding conditions result in the frequency and voltage variation of the islanded area. The variation depends on the amount of power mismatch. To improve the accuracy of the detection algorithm, this paper injects small low-frequency reactive power mismatch to the output power of DG.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1279-1281
• /
• 2005

Generally a single-phase SRM(switched reluctance motor) has several stator and rotor poles but these are excited by one regulated current at the same time. It has only one inductance variation. It means that the positive torque is only generated in the positive slope of the inductance variation. The single-phase SRM can not be started by itself. The single-phase SRM can be started by itself if the rotor is placed in the positive slope of the inductance variation. Then, the starting device is required to place the rotor in the starting position before start. On this paper, the equation of the force requisite for the starting device is derived using by the frictional force of the rotor

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.667-670
• /
• 2002

Uniform metal-droplet deposition using laser is analyzed. Using the variation principle and modeling the semi-solid phase as a non-Netwonian slurry, this model can greatly save the computational expenses that conventional numerical procedures have suffered from. The simulation results revealed that the developed model could reasonably describe the collision behavior of molten metal with solid surface. Simulations were made with variation of the falling distance and time.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.356-362
• /
• 2015

This paper presents a current control strategy in the synchronous reference frame for a single-phase PWM converter, which ensures sinusoidal input current control under the distorted source voltage and frequency condition. Given that the distorted source voltage distorts the phase angle for PWM converter control, the input current contains the same harmonics as the source voltage. Aside from the distorted voltage, the variation in source frequency reduces the performance of input current control. To achieve sinusoidal input current control under the distorted source voltage and frequency condition, this paper proposes a compensation strategy of current reference with the distortion component extracted from the phase angle and a detection strategy of frequency variation from the output of a synchronous reference frame phase-lock loop. The experimental results confirm the validity of the proposed method under the distorted source voltage and frequency condition.