• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.1-5
• /
• 2019

We investigated the effect of Fe₃O₄ addition on the critical temperature of (Bi, Pb)-2223 polycrystalline samples. Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O_10+δ + x wt. % Fe₃O₄ (x = 0.0, 0.2, 0.4, 0.6, and 0.8) samples were prepared by using a solid-state reaction method. The analysis of X-ray diffraction data indicates that as Fe₃O₄ is added, dominant phase of the sample changes from Bi-2223 to Bi-2212 with an increasing Bi-2201 phase. The transition temperature of the samples drastically decreased with the Fe₃O₄ addition. The resistance data of samples with x = 0.2 and 0.4 showed a double transition indicating a coexistence of Bi-2223 and Bi-2212 phase while the samples with x = 0.6 and 0.8 showed a single transition with a semiconducting behavior. This phase transition may originate from changes in local structure of the Bi-2223 system by Fe₃O₄ addition. Analysis of the pair distribution function of the Cu-O pair in the CuO₂ plane calculated from extended X-ray absorption fine structure data revealed that the oxygen coordination of copper ion changes from CuO₄ planar type (x = 0.0 - 0.4) to CuO₅ pyramidal type (x = 0.6, 0.8). The correlated Debye-Waller factor, providing information on the atomic disorder within the CuO₂ plane, shows an inverse relation to the coordination number. These results indicate that addition of Fe₃O₄ changes the oxygen distribution around Cu in the CuO₂ plane, causing a phase transition from Bi-2223 to more stable Bi-2212/Bi-2201 phases.

• 설비공학논문집
• /
• 제10권3호
• /
• pp.260-270
• /
• 1998

The viscous plane stagnation-flow solidification problem is theoretically investigated. An analytic solution at the beginning of solidification is obtained by expanding the temperature and thickness of solidified layer in powers of time. An exact expression for the steady-state thickness of solidified layer is also obtained. The .fluid flow toward the cold substrate inhibits the solidification process. As Stefan number becomes larger, or Prandtl number becomes smaller, the solidification is more strongly inhibited by the fluid flow. The transient heat flux at the liquid side of solid-liquid interface is increased, as Stefan number or Prandtl number is increased.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.799-805
• /
• 1996

In many cases, the magnetic farce model is linearized at the origin in designing the controller of a magnetic bearing system. However. this linear assumption is violated by the unmodeled nonlinear effect such as sensor dislocation and backup bearing dislocation. Therefore, a direct probe into the nonlinear magnetic force model in an active magnetic bearing system is necessary. To analyze the nonlinear magnetic force model of a magnetic bearing system, phase plot analysis which is to plot the numerical solution of the nonlinear equation in several initial points in the interested region is applied. Phase plot analysis is used to observe a nonlinear dynamic system qualitatively (not quantitatively). With this method, we can get much useful information of the nonlinear system. Among this information, a bifurcation graph that represents stability and locations of fixed points is essential. From the bifurcation graph, a stability criterion of magnetic bearing system is derived.

• 대한전자공학회논문지
• /
• 제26권8호
• /
• pp.1145-1151
• /
• 1989

New method to calculate the characteristics of the dominant and higher order modes of waveguide latching phase shifters are presented. Due to the tensor permeability, E and H fields inside the ferrite are expanded in terms of the LSE and LSM eigenmodes of the dielectric-slab-loaded waveguide. The equivalent coupled transmission line equations on the transverse plane are derived to obtain the dispersion characteristics and the E and H field distributions. Numerical results at X-band are compared with those published previously. The derived field distributions can be used to suppress the higher order modes of the latching phase shifters, so that the phase shift from the dominant mode only contributes the performance of the phase shifters.

• The Journal of the Acoustical Society of Korea
• /
• 제18권2E호
• /
• pp.31-38
• /
• 1999

This paper focuses on extracting formants from transfer function, derived from linear prediction analysis of speech signal. The second derivative of the log magnitude spectrum of the transfer function, the first and third derivatives of the phase spectrum of the transfer function in the z-plane are discussed. Their resolutions of detecting formants are analyzed and some comparisons are given. Theoretical analyses and experimental results show that the third derivative of the phase spectrum decays more rapidly around the formant locations than the first derivative of the phase spectrum and the second derivative of the log magnitude spectrum. Compared with the second derivative of the log spectrum and the first derivative of the phase spectrum, the third derivative of the phase spectrum has higher resolution in frequency domain and provides more accurate formant extraction.

• 대한전자공학회논문지SD
• /
• 제47권6호
• /
• pp.43-50
• /
• 2010

본 논문에서는 시스템 모듈에서 발생하는 EMI를 줄이기 위해 분할된 전원/접지 평판 구조에 의해 발생하는 방사성 방출(Radiated emission)을 분석하였다. 분석을 위해 다양한 조건을 갖는 시험 기판(Test board)에 대한 자기장과 전기장을 시뮬레이션하고 측정하여 비교하였다. 이 분석 결과는 입력 신호의 주파수 대역에서 반사계수의 위상이 $0^{\circ}$에 근접하도록 하며, 입력 신호의 주파수와 분할된 전원/접지 평판 구조의 공진주파수가 일치하지 않도록 분할된 접지 갭의 폭과 위치를 결정함으로써 방사성 방출을 줄일 수 있음을 보여준다. 또한, 스티칭 커패시터(Stitching capacitor)를 사용하여 방사성 방출을 저감시킬 수 있으며, 방사성 방출을 효과적으로 저감시키기 위해 입력 신호의 주파수에서 반사계수의 크기를 낮추고 위상이 $0^{\circ}$에 근접하도록 스티칭 커패시터의 값과 위치를 결정할 필요가 있음을 알 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.530-533
• /
• 1987

In high-frequency switched mode converters, Series Resonant Converter (SRC) is investigated using state-plane method. Phase plane trajectories of the SRC permit a direct closed form solution of the steady state operation and can make problems easy to solve. This paper describes steady state responses and characteristics of the SRC with respect to various circuit factors. The magnitute of steady state response and the average current through load are clearly related to how such the switching frequency differs from the resonant frequency. The results of the steady state analysis can be used to estimate the device and component stress on the power circuit.

• 한국통신학회논문지
• /
• 제15권9호
• /
• pp.785-795
• /
• 1990

임의의 반경을 갖는 원통의 내곡면 및 외곡면 표면에 밀착하여 호형(弧形, arc array)으로 배열된 마이크로스트립 어레이 안테나의 원거리 복사패턴에 관하여 Fourier Transform을 이용하는 근사법을 제시한다. 실효개구면을 호의 끝점을 잇는 평면으로 정의하면, 곡면 안테나는 실효개구면 평면위에 위상이 다른 비주기 배열로 근사화될 수 있음을 보였으며, 평면형에 대하여 표준화된 실효개구면비가 1.0-0.9인 범위에서 근사법에 의한 해석이 타당함을 확인하였다. 실효개구면 배열에서 위상 변화는 곡면과 개구면 사이의 비선형적 경로차에 기인하는 것으로 해석하였으며, 특히 곡률 반경이 호의 길이보다 5배 이상일 때는 Fourier Transform Method에서 scale factor의 변화만으로 해석이 가능하였다. 근사법에 의한 계산 결과는 -40dB의 측정범위에서 좌표변화법 및 실험결과와 잘 일치하였으며, 근사법과 좌표변환법에 의한 계산에서 반전력각(half power angle)의 차이는 실효개구면비가 0.9이상에서 5'미만이었다.

• 대한전자공학회논문지SD
• /
• 제40권6호
• /
• pp.400-407
• /
• 2003

본 논문에서는 전통적인 JTC와는 달리 입력평면을 주파수 영역으로 사용해서 JTC의 자기상관성분을 이용하여 원 영상을 재생할 수 있는 광 암호화 시스템을 제안하였다. 제안한 시스템은 푸리에변환과 역변환의 두 가지 처리과정을 거치지 않고 한 번의 푸리에 변환 과정을 거치는 구조로 JTC를 사용하기 때문에 출력 평면에 나타나는 위상성분의 영향을 고려해야 한다. 따라서 본 논문에서는 결합입력평면의 구조에 따른 위상성분의 영향을 분석하고 해결책을 제시하였다. 원 영상은 무작위 위상영상과 곱해져 수치적인 방법으로 암호화되며 복소함수 값을 가지므로 기존의 광 보안 시스템이 가지는 장점을 그대로 가진다. 또한 한 번의 푸리에 변환만을 이용하고 JTC의 가장 큰 문제점인 자기상관성분을 이용하여 원 영상을 재생하므로 JTC를 이용한 실시간 처리에 보다 적합하다. 컴퓨터 모의실험과 광 실험을 통하여 분석의 타당성을 확인하고 제안한 암호화 시스템의 성능을 확인하였다.

• Journal of Astronomy and Space Sciences
• /
• 제33권4호
• /
• pp.323-333
• /
• 2016

In this study, the uncertainty requirements for orbit, attitude, and burn performance were estimated and analyzed for the execution of the $1^{st}$ lunar orbit insertion (LOI) maneuver of the Korea Pathfinder Lunar Orbiter (KPLO) mission. During the early design phase of the system, associate analysis is an essential design factor as the $1^{st}$ LOI maneuver is the largest burn that utilizes the onboard propulsion system; the success of the lunar capture is directly affected by the performance achieved. For the analysis, the spacecraft is assumed to have already approached the periselene with a hyperbolic arrival trajectory around the moon. In addition, diverse arrival conditions and mission constraints were considered, such as varying periselene approach velocity, altitude, and orbital period of the capture orbit after execution of the $1^{st}$ LOI maneuver. The current analysis assumed an impulsive LOI maneuver, and two-body equations of motion were adapted to simplify the problem for a preliminary analysis. Monte Carlo simulations were performed for the statistical analysis to analyze diverse uncertainties that might arise at the moment when the maneuver is executed. As a result, three major requirements were analyzed and estimated for the early design phase. First, the minimum requirements were estimated for the burn performance to be captured around the moon. Second, the requirements for orbit, attitude, and maneuver burn performances were simultaneously estimated and analyzed to maintain the $1^{st}$ elliptical orbit achieved around the moon within the specified orbital period. Finally, the dispersion requirements on the B-plane aiming at target points to meet the target insertion goal were analyzed and can be utilized as reference target guidelines for a mid-course correction (MCC) maneuver during the transfer. More detailed system requirements for the KPLO mission, particularly for the spacecraft bus itself and for the flight dynamics subsystem at the ground control center, are expected to be prepared and established based on the current results, including a contingency trajectory design plan.