• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.286-291
• /
• 2014

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.1005-1013
• /
• 2010

This study was conducted to assess the spray control of flash boiling with mixed fuel in consideration of HCCI (Homogeneous Charge Compression Ignition) engine condition. Mixed fuel existing in two phase regions can control the process of mixture formation under low temperature and density by using the spray resulting from flash boiling which is able to induce rapid evaporation of fuel spray as well as the evaporation of high boiling point component. Because HCCI engine injects the fuel early under ambient conditions, it can facilitate the chemical control of ignition combustion and physical control such as breakup and atomization of liquid fuel by flash boiling of mixed fuel which consists of highly ignitable light oil and highly volatile gasoline. This study was conducted by performing video processing after selected composition and molar fraction of the mixed fuel as major parameters and photographed Schlieren image and Mie scattered light corresponding to the flash boiling phenomenon of the fuel spray that was injected inside a constant volume vessel. It was found that flash boiling causes significant changes in the spray structure under relatively low temperature and density. Thus, we analyzed that the flash boiling spray can be used for HCCI combustion by controlling the mixture formation at the early fuel injection timing.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.251-257
• /
• 1995

Three PEA (Pulverised Fuel Ash) samples, which were fresh, 17 and some 40 years weathered, were collected from two major British power plants. Batch leaching tests with these samples using distilled water and simulated industrial leachate showed higher amounts of element liberation from fresh ash, including Ca, Na, K, S (as $SO^{2-}_4$, $Cr_{total}$, Cu, Li Ni, Mo and CI and this seems to indicate their surface association and easier dissolution when contact with water. On the contrary Mg, Al, Ba, Si, V, As and Se do not show such readily leachable concentrations and these elements might be more associated with glass fraction in PFA particle rather than surface. Although element concentrations in the weathered ash are much lower than those in the initial leachate from the fresh ash, elements are still detected as resonable concentrations, with rather constant levels and this seems to demonstrate the element release from unstable glass phase of PFA particle. Fe, Ca, $Cr_{total}$, Cu, Ni, Zn and Hg were removed from the synthetic leachate by PFA and this is also confirmed by gain in solid PFA. The order of element retention is Meaford weathered ash > Drax weathered ash > Drax fresh ash in decreasing order and this conforms with the degree of weathering. Namely, the more wethered, the more wethered, the more effective in metal retention from the synthetic leachate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.728-735
• /
• 2009

This study intends to examine general hospital workers' health promoting lifestyle practice and figure out related factors to it. To achieve that, it conducted a survey with an unsigned self-reported questionnaire to the subject of 580 workers at hospitals located in Daejeon. The degree of practice in the subjects' health promoting lifestyle, the average of the entire questions was 2.26 points and the average of sub-sections was as in the following: 2.62 for interpersonal relations, 2.58 for spiritual growth, 2.26 for nutrition, 2.16 for stress management, 2.00 for health responsibility and 1.89 for physical activity Thus, the section of interpersonal relations showed the highest practice rate, whereas the section of physical activity demonstrated the lowest one. According to the multivariate regression analysis by phase, main factors affecting their health promoting lifestyle practice were selected as stress, attendance in education on health promotion, subjective heath condition, and age. The above results imply that general hospital workers' health promoting lifestyle practice is not sufficient and various factors are involved in it. Accordingly, it is considered that in order to enhance general hospital workers' attention to health promoting lifestyle practice, it is necessary to develop health promoting strategies and programs.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.201-209
• /
• 2011

While consolidants based on tetraethoxysilane (TEOS) have been widely used for the consolidation of decaying stone heritages, TEOS-based consolidants suffer from practical drawbacks, such as crack formation of the gel during the drying phase due to the developed capillary force. We have prepared new TEOS-based consolidants containing flexible (3-glycidoxypropyl) trimethoxysilane (GPTMS) in order to reduce capillary force development during gel drying. In this study, we have prepared TEOS/GPTMS-based consolidants containing ETEOS in order to improve the surface hydrophobisity. The physical properties of the TEOS/GPTMS/ETEOS solution with different hydrolysis were compared with those of the commercial products Wacker OH$^{(R)}$. The contact angle of the surface increased with the addition of the ETEOS, which is higher than that of Wacker OH$^{(R)}$. The sol-gel mechanism was manipulated by the degree of hydrolysis as well as the amount of ETEOS. The properties and the applicability of the developed consolidants for the decayed Korean granites are also investigated.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.1
• /
• pp.29-48
• /
• 2014

The recent keyword advertising does not reflect the individual customer searching pattern because it is focused on each keyword at the aggregate level. The purpose of this research is to observe processes of customer searching patterns. To be specific, individual deal-proneness is mainly concerned. This study incorporates location as a control variable. This paper examines the relationship between customers' searching patterns and probability of purchase. A customer searching session, which is the collection of sequence of keyword queries, is utilized as the unit of analysis. The degree of deal-proneness is measured using customer behavior which is revealed by customer searching keywords in the session. Deal-proneness measuring function calculates the discount of deal prone keyword leverage in accordance with customer searching order. Location searching specificity function is also calculated by the same logic. The analyzed data is narrowed down to the customer query session which has more than two keyword queries. The number of the data is 218,305 by session, which is derived from Internet advertising agency's (COMAS) advertisement managing data and the travel business advertisement revenue data from advertiser's. As a research result, there are three types of the deal-prone customer. At first, there is an unconditional active deal-proneness customer. It is the customer who has lower deal-proneness which means that he/she utilizes deal-prone keywords in the last phase. He/she starts searching a keyword like general ones and then finally purchased appropriate products by utilizing deal-prone keywords in the last time. Those two types of customers have the similar rates of purchase. However, the last type of the customer has middle deal-proneness; who utilizes deal-prone keywords in the middle of the process. This type of a customer closely gets into the information by employing deal-prone keywords but he/she could not find out appropriate alternative then would modify other keywords to look for other alternatives. That is the reason why the purchase probability in this case would be decreased Also, this research confirmed that there is a loyalty effect using location searching specificity. The customer who has higher trip loyalty for specificity location responds to selected promotion rather than general promotion. So, this customer has a lower probability to purchase.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.120-126
• /
• 2009

As the information age grows rapidly, the amount of digital texts has been increasing as well. It has brought an increasing of visualization case in order to figure out lots of digital texts. Existing visualized design of digital text is merely concentrating on figuration of subject word through adoption of stemming algorithm and word frequency extraction, prominence of meaning of text, and connection in between sentences. So it is a fact that expression of rhythm that can visualize sentimental feeing of digital text was insufficient. Syllable is a phoneme unit that can express rhythm more efficiently. In sentences, syllable is a most basic pronunciation unit in pronouncing word, phase and sentence. On this basis, accent, intonation, length of rhythm factor and others are based on syllable. Sonority, which is most closely associated with definitions of syllable, is expressed through air flow of igniting lung and acoustic energy that is specified kinetic energy into sonority. Seen from this perspective, this study examines phonologic definition and characteristics based on syllable, which is properties of digital text, and research the way to visualize rhythm through diagram. After converting digital text into phonetic symbol by the experiment, rhythm information are visualized into images using degree of resonance, which was started from rhythm in all languages, and using syllable establishment of digital text. By visualizing syllable information, it provides syllable information of digital text and express sentiment of digital text through diagram to assist user's understanding by systematic formula. Therefore, this study is aimed at planning for easy understanding of text's rhythm and realizing visualization of digital text.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.135-142
• /
• 2008

The primary innovation in the new footwear is a heel lift of $20^{\circ}$ which is proposed to improve posture and balance as well as increase shock absorption. The purpose of this research was to compare the movement, forces and muscle activity between the new shoes and standard athletic footwear during standing and walking. Nine healthy subjects participated in this study. Data were collected at two times: 1) when the subjects first wore the new walking shoes and 2) after the subjects wore the shoes for 6 hours a day for two weeks. 1. During standing. the movement of the center of pressure is increased approximately 60% when wearing the new walking shoes compared to a control shoe. 2. During walking. the ankle is approximately $14^{\circ}$ more dorsiflexed during landing due to the 200heel lift in the new walking shoes. The knee compensates slightly by flexing approximately $2^{\circ}$ more. 3. As a result of the changes in the walking movement, the ground reaction forces are applied more quickly, although the peak magnitudes do rut change. 4. The resultant joint moments at the ankle and knee joints decrease from 21-60% with the largest reductions occurring during landing. In conclusion, the new footwear change the movement, showing a more upright stance. Also, the new footwear reduce joint loading at the joint during the landing and weight acceptance phase of walking. However, the influence of the new footwear is immediate and does rut change after wearing the shoes for two weeks.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.253-259
• /
• 2010

The neuroprotective effects of extracts from various parts of peanut sprouts on glutamate-induced neurotoxicity in N18-RE-105 cells were investigated. This study was performed to evaluate the neuroprotective activity of methanolic extracts from the whole (WME), heads (HME), and stems (SME) of peanut sprouts. The neuroprotective effects of these extracts were measured by MTT reduction assay, LDH release assay, phase-contrast microscopy, and flow cytometric analysis on the N18-RE-105 cells. Among these extracts, the HME showed the greatest neuroprotective effects, and was further fractionated with hexane, diethyl ether, ethyl acetate, and water, according to degree of polarity. Out of the fractionated extracts, the diethyl ether layer showed the highest activity on glutamate-induced cytotoxicity in N18-RE-105 cells. The sub-G1 DNA contents of the glutamate-induced severely apoptotic N18-RE-105s were measured by flow cytometric analysis to confirm the HME's anti-apoptotic activity. Interestingly, after incubation with 100 mg/ml of the HME, the proportion of sub-G1 cells of the glutamate-stressed N18-RE-105s had been greatly reduced, from 58.5% to 9.1%. These results imply that HME may have strong potential as a chemotherapeutic agent against neuronal diseases.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.2
• /
• pp.363-374
• /
• 2015

Instrumentation and control(I&C) system has been mainly designed and operated based on analog technologies in existing Nuclear Power Plants(NPPs). However, As the development of Information Technology(IT), digital technologies are gradually being adopted in newly built NPPs. I&C System based on digital technologies has many advantages but it is vulnerable to cyber threat. For this reason, cyber threat adversely affects on safety and reliability of I&C system as well as the entire NPPs. Therefore, the software equipped to NPPs should be developed with cyber security attributes from the initiation phase of software development life cycle. Moreover through cyber security assessment, the degree of confidence concerning cyber security should be measured and if managerial, technical and operational work measures are implemented as intended should be reviewed in order to protect the I&C systems and information. Currently the overall cyber security program, including cyber security assessment, is not established on I&C systems. In this paper, we propose cyber security assessment methods in the Software Development Life Cycle by drawing cyber security activities and assessment items based on regulatory guides and standard technologies concerned with NPPs.