• Clean Technology
• /
• v.25 no.1
• /
• pp.19-32
• /
• 2019

As regional air pollution gets worse by the sulfur oxides emitted from various types of vessels passing through the many countries, the International Maritime Organization establishes the emission control areas and regulates sulfur dioxide in those areas. In order to satisfy these regional regulations, the fuel selection method and the exhaust gas post-treatment device are applied to the ships. Due to the economic reasons, the post-treatment method of exhaust gas for reducing the amount of sulfur oxides discharged is mainly preferred. The scrubber which is dominantly used in the ships are the spray type system where the sprayed liquid drops used for capturing the soluble sulfur dioxides in the exhaust gas. The performance of the spray type system depends on the size distribution of the sprayed droplets. In order to evaluate this performance, we designed counterflow type scrubber and cyclone scrubber and evaluated the desulfurization efficiency and the amount of droplet evaporation according to the size of each droplet by using computational fluid dynamics. The Eulerian-Eulerian analysis method was used because the scrubber had a gas-liquid two-phase flow inside the scrubber. When the diameter of the droplet was $100{\mu}m$, $300{\mu}m$, $500{\mu}m$ and $700{\mu}m$. As a result, both of scrubbers showed high desulfurization efficiency and low evaporation amount at $500{\mu}m$ and $700{\mu}m$.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.101-109
• /
• 2003

Provitamin $B_5$ liquid crystal ($PVB_5$-LC) was the new emulsion system to enhance moisturizing activity on the skin. In this study, it should be mentioned that PVB5-LC could be prepared with the main compound of hydrogenated lecithin (HL) in oil-in water (O/W) emulsion. The key ingredient of humectants was contained 2% of provitamin $B_5$ ($PVB_5$) into the $PVB_5$-LC. The best suitable compositions of $PVB_5$-LC were made from 4.0 wt% of HL, 4.0 wt% of cetostearyl alcohol (CSA) as emulsifier and gelling agent, 3.0 wt% of 1,3-butylene glycol (1,3-BG) and 2.0 wt% of glycerin as moisturizers, 3.0 wt% of cyclomethicone (CMC), 3.0 wt% of isononanoate (ININ), 3.0 wt% of capric/caprylic triglyceride (CCTG), 3.0 wt% of macadamia nut oil (MNO) as emollients. As the analytical result of $PVB_5$-LC, it could know that the distribution range of particle size was 0.14 to 12.37 m level (mean size 3.24 m). It was certified the multi lamellar phase around the droplet of liquid crystal when observed the droplet particles through a polarization microscope. And it clinically was tested the effectiveness of moisturizing activity (in-vivo) compared with control sample (O/W emulsion). The effectiveness of moisturizing activity of $PVB_5$-LC with Skincon-200EX after 6 hours went up 49.0% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 25.7% (p<005, n=20). Also, in case of Comeometer CM-825, the moisturizing activity of $PVB_5$-LC after 6 hours rose 36.6% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 10.8%. Therefore, it was known that the effectiveness moisturizing activity of $PVB_5$-LC with HL was remarkably superior compared with O/W emulsion cream.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.48-57
• /
• 2006

This work describes a 12b 200KHz 0.52mA $0.47mm^2$ algorithmic ADC for sensor applications such as motor controls, 3-phase power controls, and CMOS image sensors simultaneously requiring ultra-low power and small size. The proposed ADC is based on the conventional algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. The input SHA with eight input channels for high integration employs a folded-cascode architecture to achieve a required DC gain and a sufficient phase margin. A signal insensitive 3-D fully symmetrical layout with critical signal lines shielded reduces the capacitor and device mismatch of the MDAC. The improved switched bias power-reduction techniques reduce the power consumption of analog amplifiers. Current and voltage references are integrated on the chip with optional off-chip voltage references for low glitch noise. The employed down-sampling clock signal selects the sampling rate of 200KS/s or 10KS/s with a reduced power depending on applications. The prototype ADC in a 0.18um n-well 1P6M CMOS technology demonstrates the measured DNL and INL within 0.76LSB and 2.47LSB. The ADC shows a maximum SNDR and SFDR of 55dB and 70dB at all sampling frequencies up to 200KS/s, respectively. The active die area is $0.47mm^2$ and the chip consumes 0.94mW at 200KS/s and 0.63mW at 10KS/s at a 1.8V supply.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.345-360
• /
• 2000

The effects on CTC (T1) and CTC, Sulfathiazole and Penicillin Combination (T2) medication in feed through one life cycle of pigs, namely, weaning, mating, farrowing, lactation, growing, finishing and slaughter, were tested under local condition. In sow phase, productivity and the number of microflora in urine before and after medication of CTC were studied and average daily gain and feed conversion rate were checked during growing and finishing period. All pigs reached at 155 days old were slaughtered for pathological examination. 1. Litter size, farrowing rate and survival rate at birth were improved by CTC medication from weaning to 21th day after mating and mortality of piglet at weaning, 25 days after farrowing, was reduced in the CTC medication group, but no siginificant. 2. The number of microflora in the sow urine was changed with the medication at 200ppm of CTC in feed. In particular, the number of E coli, Samonella and Staphylococci were reduced by CTC medication. 3. The average daily gain and feed conversion rate of grower and finisher pigs was improved significantly in both treated groups, most in the high level CTC (T1) medicated group and was lowest in the control group. 4. The number of infected lungs was reduced not significant by both treatments (as % pneumonic lesions Co 66.7%, T1 47.1%, T2 31.4%) and the severity of lung lesions was significantly reduced by both high level of CTC and CTC combination medication in feed. 5. Although there were no statistical differences in atrophic rhinitis based on turbinate scores among the 3 groups, the number of mild and moderate (Grade 2 and 3) infections was higher in the control group (9/36) than in the treated groups (T1 2/34 & T2 4/35).

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.35-43
• /
• 2013

Nowadays the widely used media in architecture include visualizations, animations and three-dimensional models. 3D digital methods using active CAM(Computer Aided Manufacturing) and CNC(Computerized Numerical Control) imaging have been developed for accurate shape and 3D measurements in freeform buildings. In contrast to a conventional building using auto CAD system and others, the proposed digital optimization method is based on a combination of 3D numerical data and parametric 3D model for design and construction. The objective of this paper is therefore to present digital optimization process for constructability of freeform building. The method can be useful in the effective implementation of an error-proofing process of freeform building during design and construction phase. 3D digital coordinate data can be used effectively to identify correct size of structural and finish members and installation location of each members in construction field. In addition, architects, engineers and contractors can evaluate design, materials, constructability and identify error-proofing opportunities. Other project participants can also include representatives from all levels of management, departments as well as workers and key subcontractors' personnel, if necessary. The 3D digital optimization process is therefore appropriate to serious variations in freeform shape. For future study, the developed digital optimization method is necessary to be carried out to verify the robustness and accuracy for constructability in construction field.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.29-36
• /
• 2022

The hydrogen reduction behavior of molybdenum oxides was studied using a horizontal-tube reactor. Reduction was carried out in two stages: MoO₃ → MoO₂ and MoO₂ → Mo. In the first stage, a mixed gas composed of 30 vol% H₂ and 70 vol% Ar was selected for the MoO₃ reduction because of its highly exothermic reaction. The temperature ranged from 550 to 600 ℃, and the residence time ranged from 30 to 150 min. In the second step, pure H₂ gas was used for the MoO₂ reduction, and the temperature and residence time ranges were 700-750 ℃ and 30-150 min, respectively. The hydrogen reduction behavior of molybdenum oxides was found to be somewhat different between the two stages. For the first stage, a temperature dependence of the reaction rate was observed, and the best curve fittings were obtained with a surface reaction control mechanism, despite the presence of intermediate oxides under the conditions of this study. Based on this mechanism, the activation energy and pre-exponential were calculated as 85.0 kJ/mol and 9.18 × 10⁷, respectively. In addition, the pore size within a particle increases with the temperature and residence time. In the second stage, a temperature dependence of the reaction rate was also observed; however, the surface reaction control mechanism fit only the early part, which can be ascribed to the degradation of the oxide crystals by a volume change as the MoO₂ → Mo phase transformation proceeded in the later part.

• Korean Journal of Animal Reproduction
• /
• v.21 no.3
• /
• pp.255-264
• /
• 1997

The purpose of this study was attempted to investigate the number changes of the growing and mature follicles in ovary following repeats of pregnant mare serum gonadotropin(PMSG) treatments for superovulation in nulliparous rats. Thirty two rats(Sprague-Dawely, about 200~250 gm) were randomized into 4 groups. Control group rats were sacrified at estrus phase confirmed by vaginal smear. PMSG-treated group 1 rats, PMSG-treated group 2 rats and PMSG-treated group 3 rats were sacrified at 48 hrs after injection once with PMSG 25 IU, after 2 repeated injection by a week interval, and 3 repeated injection, respectively. The uteri and ovaries of rats were removed and weighed and then were observed grossly and serial sections of all ovaries and some sections of uteri by paraffin embedding were stained with H-E. Number of ovarian follicles about 3 grades of small, middle and large follicles from seondary and follicles were investigated by LM photographies of ovary preparations. The criteria of the small, middle, and large follicles were based as small follicle with preantral follicles with 2~4 layers of granulosa cells surrounding the oocyte, as secondary follicles with more than 5 layers of granulosa cells and early signs of antral cavity or with small clefts on either side of the oocytes, and as tirtiary follicles with a single medium sized antral cavity or large well-formed antral cavity, respectively. In gross findings, the wall of the uteri in control group were thin, and those in 3 PMS-treated group were markedly thickened and some uterine lumen of those filled with fluid. In histological findings, the walls of the uteri from 3 PMSG-treated groups were hypertrophied and their blood and lymph vessels were dilated than those of control group. The ovaries fo 3 PMSG-treated groups were more increased in size and the cortexes were more developed and increased in width but there are no difference of development and changes in 3 PMSG-treated groups. The weight of the uteri and ovaries per rat in PMSG -treated group 1, 2 and 3 were a, pp.ared to be significantly increased 171.4$\pm$47.6%, 162.3$\pm$43.9%, 206.9$\pm$30.4%, respectively than those of control groups. The mean number of follicle per ovary in control group were a, pp.ared to be 17.1$\pm$3.5, 46.2$\pm$14.5, and 74.3$\pm$22.7 at large, middle and small follicles, respectively and total number of these 3 grade follicles per ovary were a, pp.ared to be 137.7$\pm$31.7. The mean number of follicle per ovary in PMSG-treated group 1 were a, pp.ared to be 25.6$\pm$7.3, 78.1$\pm$29.9, and 83.2$\pm$34.0, at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 187.5$\pm$58.8. The mean number of follicle per ovary in PMS-treated group 2 were a, pp.ared to be 21.9$\pm$5.2, 67.8$\pm$16.8, and 68.0$\pm$14.9 at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 157.7$\pm$26.2. The mean number of follicle per ovary in PMS-treated group 3 were a, pp.ared to be 21.7$\pm$4.8, 61.5$\pm$17.0, and 59.7$\pm$16.2 at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 143.5$\pm$29.6. The number of follicles in PMSG-treated group 1 a, pp.ared to be more number than other 2 PMSG-treated gruops and tended to be decreased by frequency of PMSG-treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.51-68
• /
• 1984

The purpose of this study is primarily to test the use value of tooth ash as an alternative material of the synthetic hydroxyapatite. For this purpose the author performed the experimental study to investigate the phsyical properties of sintered tooth ash and its histocompatibility in vitro. The tooth ash was made by incinerating procedure at $650^{\circ}C,\;750^{\circ}C,\;850^{\circ}C,\;950^{\circ}C\;and\;1050^{\circ}C$ respectively. The composition of tooth ash was analyzed and X-ray diffraction was done. The experimental specimens were molded to the cylinderical form 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$, which were divided into two groups; the one is sintered tooth ash at $1100^{\circ}C$ and the other is fired mixture of tooth ash and dental porcelain mixed to the weight ratio of 4:6, 5:5, 6:4 and 7:3. The physical propoerties of the sintered specimens were examined and their microstructure was observed under the Scanning Electron Microscope. The results obtained were as followings: 1. The difference of the tooth ash composition depending on incinerating temperature was of no significance, but the $CO_2$ disappeared from $950^{\circ}C$. 2. X-ray diffraction showed the tooth ash was mainly composed of hydroxyapatite and a small amount of - white lockite. But phase transformation was not disclosed. 3. The microstructure of the sintered specimens of the ashed tooth powder was of no difference in the structure and grain size accompanying the ashed temperature, but sintering ability seemed to be the best in the specimen incinerated at $950^{\circ}C$. 4. There was good wettability in the mixed sintered specimens of the ashed tooth powder and the porcelain powder. 5. The compressive strength of the sintered specimens of the tooth ash incinerated at $950^{\circ}C$ was the highest with $589.75kg/cm^2$ and the porosity and the absorption were the lowest as well. 6. The mixed sintered specimens of the tooth ash and porcelain powder was good in the physical properties in the case of mixed weight ratio of 6:4. 7. The animal fibroblast cultures with porcelain showed increase in the cell number, whereas the tooth ash showed a small degree of growth inhibition. But the difference of cell multiplication efficiency between control cultures and test cultures with tooth ash was not observed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.3
• /
• pp.223-229
• /
• 2013

Polymer Electrolyte Membrane Fuel Cell (PEMFC) is a power generation system to convert chemical energy of fuels and oxidants to electricity directly by electrochemical reactions. As a catalyst support for PEMFCs, carbon black has been generally used due to its large surface area and high electrical conductivity. However, under certain circumstances (start up/shut down, fuel starvation, ice formation etc.), carbon supports are subjected to serve corrosion in the presence of water. Therefore, it would be desirable to switch carbon supports to corrosion-resistive support materials such as metal oxide. $TiO_2$ has been attractive as a support with its stability in fuel cell operation atmosphere, low cost, commercial availability, and the ease to control size and structure. However, low electrical conductivity of $TiO_2$ still inhibits its application to catalyst support for PEMFCs. In this paper, to explore feasibility of $TiO_2$ as a catalyst support for PEMFCs, $TiO_2$ nanofibers were synthesized by electrospinning and calcinated at 600, 700, 800 and $900^{\circ}C$. Effects of calcination temperature on crystal structure and electrical conductivity of electrospun $TiO_2$ nanofibers were examined. Electrical conductivity of $TiO_2$ nanofibers increased significantly with increasing calcination temperature from $600^{\circ}C$ to $700^{\circ}C$ and then increased gradually with increasing the calcination temperature from $700^{\circ}C$ to $900^{\circ}C$. It was revealed that the remarkable increase in electrical conductivity could be attributed to phase transition of $TiO_2$ nanofibers from anatase to rutile at the temperature range from $600^{\circ}C$ to $700^{\circ}C$.

• Journal of the Korean earth science society
• /
• v.28 no.7
• /
• pp.857-870
• /
• 2007

The structure and evolution of a thunderstorm outflow in two dimensions with no environmental wind are investigated using a cloud-resolving model with explicit liquid-ice phase microphysical processes (ARPS: Advanced Regional Prediction System). The turbulence structure of the outflow is explicitly resolved with a high-resolution grid size of 50m. The simulated single-cell storm and its associated Kelvin-Helmholtz (KH) billows are found to have the lift stages of development maturity, and decay. The secondary pulsation and splitting of convective cells resulted from interactions between cloud dynamics and microphysics are observed. The cooled downdrafts caused by the evaporation of rain and hail in the relatively dry lower atmosphere result in thunderstorm cold-air outflow. The outflow head propagates with almost constant speed. The KH billows formed by the KH instability cause turbulence mixing from the top of the outflow and control the structure of the outflow. Ihe KH billows are initiated at the outflow head, and pow and decay as moving rearward relative to the gust front. The numerical simulation results of the ratio of the horizontal wavelength of the fastest growing perturbation to the critical shear-layer depth and the ratio of the horizontal wavelength of the billow to its maximum amplitude are matched well with the results of other studies.