• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.658-665
• /
• 2011

In the present paper, a novel fast peak detector for single- or three-phase unsymmetrical voltage sags is proposed. The proposed detector is modified from a single-phase digital phase-locked loop based on a d-q transformation using an all-pass filter (APF). APF generates a virtual phase with $90^{\circ}$ phase delay. However, this virtual phase cannot reflect a sudden change of the grid voltage in the moment of voltage sag, which causes a peak value to be significantly distorted and to settle down slowly. Specifically, the settling time of the peak value is too long when voltage sag occurs around a zero crossing, such as phase $0^{\circ}$ and $180^{\circ}$. This paper describes the operating principle of the APF problem and proposes a modified all-pass filter (MAPF) to mitigate the inherent APF problem. In addition, a new fast peak detector using MAPF is proposed. The proposed detector is able to calculate a peak value within 0.5 ms, even when voltage sag occurs around zero crossing. The proposed fast peak detector is compared with the conventional detector using APF. Results show that the proposed detector has faster detection time in the whole phase range. Furthermore, the proposed fast peak detector can be effectively applied to unsymmetrical three-phase voltage sags. Simulation and experimental results verify the advantages of the proposed detector and MAPF.

• Journal of information and communication convergence engineering
• /
• 제2권2호
• /
• pp.102-105
• /
• 2004

A Quadrature phase detector for high-speed delay-locked loop is introduced. The proposed Quadrature phase detector is composed of two nor gates and it determines if the phase difference of two input clocks is 90 degrees or not. The delay locked loop circuit including the Quadrature phase detector is fabricated in a 0.18 um Standard CMOS process and it operates at 5 GHz frequency. The phase error of the delay-locked loop is maximum 2 degrees and the circuits are robust with voltage, temperature variations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.210-215
• /
• 1999

The proposed detector is consists of three-phase sinusoidal signal generator and peak detector. This peak detector can detect the peak voltage value at the state of variable frequency. In experi-ment three-phase sinusoidal signals are generated from D/A converter using IBM PC and deliv-ered to the peak detector. Each signals are squared by multiplier and summed up Peak value is the square root of summed value extracted by square root circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.718-720
• /
• 1999

This paper describes a charge pump PLL architecture which achieves high frequency operation and fast acquisition. This architecture employs multi-phase frequency detector comprised of precharge type phase frequency detector and conventional phase frequency detector. Operation frequency is increased by using precharge type phase frequency detector when the phase difference is small and acquisition time is shortened by using conventional phase frequency detector and increased charge pump current when the phase difference is large. By virtue of this multi-phase frequency detector structure, the maximum operating frequency of 694MHz at 3.0V and faster acquisition were achieved by simulation.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.97-103
• /
• 2014

본 논문에서는 1/8-rate 위상검출기를 이용한 클록-데이터 복원회로를 제안한다. 기존의 full-rate 또는 half-rate 위상검출기의 사용은 동일 데이터 속도에서 복원된 클록의 주파수가 상대적으로 높아야 하므로 샘플링회로와 VCO의 설계에 부담으로 작용한다. 본 논문에서는 복원된 클록의 주파수를 낮추기 위해 1/8-rate 클록을 사용할 수 있는 위상검출기를 구성하고 Linear equalizer를 위상검출기 입력에 사용하여 복원된 클록의 지터를 감소시켰다. 테스트 칩은 0.13-${\mu}m$ CMOS 공정으로 제작되었고 입력은 3-Gb/s PRBS 데이터 패턴, 동작전압은 1.2-V에서 측정되었다.

• 한국멀티미디어학회논문지
• /
• 제3권6호
• /
• pp.652-660
• /
• 2000

본 논문에서는 NRZ 랜덤 비트 동기를 위한 새로운 표본 위상 검출기 (SPD: Sampling Phase Detector)를 제안한다. 제안하는 SPD는 국부 기준 신호의 주기와 입력 신호의 비트 구간의 위상 차의 평균값을 계산한다. 시뮬레이션과 실험 결과는 제안된 SPD가 NRZ 랜덤 신호의 Phase Detector로 유용하다는 것을 보여 준다. 제안된 SPD를 사용하여 NRZ 램덤 비트 동기 회로를 설계하고 구현하였다.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.773-782
• /
• 2018

FLL(Frequency-Locked-Loop: 주파수 잠금회로)은 주파수-검출기(frequency detector)를 사용하여 VCO의 위상잡음을 개선하는 부-궤환(negative feedback) 시스템이다. 본 논문은 FLL에 의한 VCO의 위상잡음의 이론적 분석을 새로이 제시하였다. 분석 결과, VCO의 위상잡음은 FLL 루프-대역폭 내에서는 주파수검출기와 루프-필터로 결정된 위상잡음을 좇아가며, 반면 루프-대역폭 밖에서는 VCO의 위상잡음이 그대로 나타나게 된다. 따라서 이론적 분석 결과를 바탕으로 VCO의 위상잡음을 최소화 하는 FLL을 설계할 수 있게 된다. 또한 실험을 통하여 이론적으로 분석된 위상잡음 결과는 검증하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.394-397
• /
• 2002

A design study of phase detectors for the 2.5 Gb/s CDR circuit using a standard 0.18-${\mu}{\textrm}{m}$ CMOS process has been performed. The targeted CDR is based on the phase-locked loop and thus it consists of a phase detector, a charge pump, a LPF, and a VCO. For high frequency operation of 2.5 Gb/s, phase detector and charge pump, which accurately compare phase errors to reduce clock jitter, are critical for designing a reliable CDR circuit. As a phase detector, the Hogge phase detector is selected but two transistors are added to improve the performance of the D-F/F. The charge pump was also designed to be placed indirectly input and output.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.315-318
• /
• 1999

In the 3-phase PWM converter, accurate detection of the supplied voltage phase is very important. But a detecting circuit cannot avoid generating the deviation of phase detector so that we need to compensate it. In this paper, an accurate and simple compensating method of deviation of phase detector is proposed.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.306-309
• /
• 2004

This paper presents a new active antenna consisting of a microstrip patch for the passive radiator, a mixer for frequency conversion, a voltage controlled oscillator (VCO) and a phase detector for phase control. The microwave signal frequency has been converted into intermediate frequency (IF) on the antenna elements by the mixer. The active antenna consists of two ports, the IF port has a transmitted IF signal via power combined to the baseband and the dc control port is under the control of the phase-detector. The input voltage of the VCO is controlled by the phase detector. The scan range of the array is determined by the phase detector and the VCO and is obtained between 30$^{\circ}$ and - 30$^{\circ}$