• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.254-254
• /
• 2010

We report aqueous synthesis of cadmium telluride (CdTe) quantum dots(QDs) using imidazolium-based ionic liquids with various functional groups. The functinalized ionic liquids were designed to have thiol groups, and then phase transfer with aqueous or organic solvents can be adjusted by changing side chain lengths of the cation and the choice of anion. The quantum yield was obtained IL-functionalized CdTe QDs reached up to 40% by post-treatment method.

• 대한토목학회논문집
• /
• 제35권5호
• /
• pp.1083-1096
• /
• 2015

본 연구는 준설매립과정에서의 관중혼합 거동을 3차원 전산유체역학(CFD, Computational Fluid Dynamics)을 통해 분석한 연구로 준설토 배송관과 개질재 주입관이 합류하며 발생되는 이상(2-phase)유체의 혼합효율을 사전 평가함으로써 관중혼합 양상을 고찰하는 물리실험의 시행착오를 줄여 경제성을 증진시키는데 연구목적을 두고 있다. 수치해석에 이용된 CFD 코드는 OpenFOAM$^{(R)}$이고, 몇 가지의 기본가정 하에 배송관-주입관의 관경과 합류각을 변화시켜 총 18가지 경우에 대한 삼상(3-phase)유체 거동을 모의하였다. 그 결과 혼합효율에 대한 우열은 있었으나 그 차이는 미미하였고, 모든 경우에서 각 재료 사이의 경계층이 뚜렷하게 형성되었다. 이러한 현상을 극복하기 위한 보완 실험을 통해 경계층 파쇄(破碎)를 위한 관 내 부속 구조물이 고안되었으며, 본 연구에서 제시된 구조물은 단거리 배송관로 내 준설토와 개질재의 혼합효율을 크게 향상시킬 수 있음을 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.138-143
• /
• 2007

The leading-cab (high energy absorption area) of rolling stock directly is impacted on the frontal crash unlike other cabs. Thus, leading-cab has a structurally complex shape to solve getting concentrated loads. However, in order to enhance structural performance and to achieve the weight reduction of cab, changing the sizes and adjusting the distance of members do not take an effective result. Therefore, in design phase, to find the material arrangement which helps structural capacity be better should be done. This research applies the topology optimization to concept design of protective shell frame on strategy of crush energy absorption with considering pressure and vertical loads acting on the principal part of leading-cab. In this research, topology optimization method focuses on structural design, and which yields optimal material arrangement under given loads and boundary conditions using density method which has the density of material as design variables. Finally, this research presents optimal material arrangement and structure of protective shell frame on given loads with applying topology optimization.

• Steel and Composite Structures
• /
• 제39권5호
• /
• pp.493-509
• /
• 2021

There is not enough mixed finite element method (MFEM) model developed for static and dynamic analysis of functionally graded material (FGM) beams in the literature. The main purpose of this study is to develop a reliable and efficient computational modeling using an efficient functional in MFEM for free vibration and static analysis of FGM composite beams subject to high order shear deformation effects. The modeling of material properties was performed using mixture rule and Mori-Tanaka scheme which are more realistic determination techniques. This method based on the assumption that a two phase composite material consisting of matrix reinforced by spherical particles, randomly distributed in the beam. To explain the displacement components of the shear deformation effects, it was accepted that the shear deformation effects change sinusoidal. Partial differential field equations were obtained with the help of variational methods and then these equations were transformed into a novel functional for FGM beams with the help of Gateaux differential derivative operator. Thanks to the Gateaux differential method, the compatibility of the field equations was checked, and the field equations and boundary conditions were reflected to the function. A MFEM model was developed with a total of 10 degrees of freedom to apply the obtained functional. In the numerical applications section, free vibration and flexure problems solutions of FGM composite beams were compared with those predicted by other theories to show the effects of shear deformation, thickness changing and boundary conditions.

• 설비공학논문집
• /
• 제11권4호
• /
• pp.549-559
• /
• 1999

An experimental study was peformed to measure the viscosity of microencapsulated PCM slurries as the functions of its concentration and temperature, and also influence to its fluid dynamics. For the viscosity measurement, a rotary type viscometer, which was equipped with temperature control system, was adopted. The slurry was mixed with water and Sodium Lauryl Sulphate as a surfactant by which its suspended particles were dispersed well without the segregation of particles during the experiment. The viscosity was increased as the concentration of MicroPCM particle added. The surfactant increased 5% of the viscosity over the working fluid without particles. Experiments were proceeded by changing parameters such as PCM particles'concentration as well as the temperature of working fluid. As a result, a model to the functions of temperature for the working fluid and its particle concentration is proposed. The proposed model, for which its standard deviation shows 0.8068, is agreed well with the reference's data. The pressure drop was measured by U-tube manometer, and then the friction factor was obtained. It was noted that the pressure drop was not influenced by the state of PCM phase, that is solid or liquid in its core materials at their same concentration. On the other hand, it was described that the pressure drop of the slurry was much increased over the working fluid without particles. A friction factor was placed on a straight line in all working fluids of the laminar flow regardless of existing particles as we expected.

• Transactions on Electrical and Electronic Materials
• /
• 제10권2호
• /
• pp.53-57
• /
• 2009

In this paper we develop a method to observe faults in semiconductor devices and transmission lines by calculating the variation of the reflection function in a dielectric microstrip line that has an open-ended termination containing an optically induced plasma region. It is analyzed with the assumption that the plasma is distributed homogeneously in laser illumination. With the non linear material of degradation, the concentration of the carrier in the part of the material has changed. Since the input wave has produced the phenomenon of reflection, the input signal to the open-ended microstrip lines can be observed on reflection to identify the location of the fault. The characteristic impedances resulting from the presence of plasma are evaluated by the transmission line model. The variation of the reflection wave in the microwave system has been calculated by using an equivalent circuit model. The transient response has been also evaluated theoretically for changing the phase of the variation in the reflection. The variation of characteristic response in differentially localized has been also evaluated analytically.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.651-657
• /
• 2003

Ultrasonic microscope has been used to detect the defects on surface or inner solid. Conventionally, it has used at a single operating frequency. The resolution and quality of the measured images are determined by a characteristic of the transducer of the ultrasonic microscope. The conventional ultrasonic microscope has been used envelope detector to detect the amplitude of reflected signal, but the changes in amplitude is not sensitive enough for specimen with microstructure that in phase. In this paper, we have studied multi-frequency depth resolution enhancement with ultrasonic reflection microscope for the reflectors of a stainless steel reference specimen and a reference calibration block to be used as the material in nuclear power plants for ISI, PSI. Increased depth resolution can be obtained by taking two, three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion and high quality signal distribution for the image to the changing rate of depth for the reflectors of the two kinds of specimens.

• 한국분말재료학회지
• /
• 제28권5호
• /
• pp.417-422
• /
• 2021

In the present work, Inconel 718 alloy is additively manufactured on the Ti-6Al-4V alloy, and a functionally graded material is built between Inconel 718 and Ti-6Al-4V alloys. The vanadium interlayer is applied to prevent the formation of detrimental intermetallic compounds between Ti-6Al-4V and Inconel 718 by direct joining. The additive manufacturing of Inconel 718 alloy is performed by changing the laser power and scan speed. The microstructures of the joint interface are characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and micro X-ray diffraction. Additive manufacturing is successfully performed by changing the energy input. The micro Vickers hardness of the additive manufactured Inconel 718 dramatically increased owing to the presence of the Cr-oxide phase, which is formed by the difference in energy input.

• 한국지반신소재학회논문집
• /
• 제7권2호
• /
• pp.1-5
• /
• 2008

일반적인 콘크리트 건축물이나 도로포장에서 발생되는 부등침하는 건물의 붕괴나 도로의 수명저하로 인한 비용을 증가시킨다. 이에 대하여 침하된 구조물 하부지반에 그라우팅 공법을 이용하여 지반침하복원을 실시한다. 그러나 기존 그라우트 공법의 경우, 강도발현기간이 길고, 보강효과가 지속적이지 못한 단점을 지니고 있다. 이를 보완하기 위한 주입재료로써, 고밀도 팽창 재료의 특성을 평가하였다. 지반상태와 팽창재료의 주입량의 변화에 따른 압축강도의 변화와 화학물질에 대한 안정성 시험 및 SEM 촬영을 통하여 특성을 연구하였다. 압축강도는 다른 물질과의 혼합으로 높은 강도가 발현되었으며, 화학적 저항성은 대부분의 조건에서 반응하지 않았으나 알코올계열에 변화가 발생하였다. SEM 촬영을 통하여 강도발현에 있어서 조직구성이 촘촘할수록 치밀하게 구성된다고 판단하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.609-614
• /
• 2008

A periodic mesoporous organosilica material was synthesized by microwave heating (PMO-M) using 1,2-bis(trimethoxysilyl)ethane as a precursor in a cationic surfactant solution, and textural properties were compared with those of the product produced by conventional convection heating (PMO-C). These synthesized materials were characterized using XRD, TEM/SEM, N2 adsorption isotherm, 29Si and 13C NMR, and TGA, which confirmed their good structural orders and clear arrangements of uniform 3D-channels. Synthesis time was reduced from 21 h in PMO-C to 2-4 h in PMO-M. PMO-M was made of spherical particles of 1.5-2.2 m m size, whereas PMO-C was made of decaoctahedron-shaped particles of ca. 8.0 m m size. Effect of synthesis temperature, time, and heating mode on the PMO particle morphology was examined. The particle size of PMO-M could be controlled by changing the heating rate by adjusting microwave power level. PMO-M demonstrated improved separation of selected organic compounds compared to PMO-C in a reversed phase HPLC experiment. Ti-grafted PMO-M also resulted in higher conversion in liquid phase cyclohexene epoxidation than by Ti-PMO-C.