• 한국운동역학회지
• /
• 제17권2호
• /
• pp.103-112
• /
• 2007

The purpose of this study was to investigate the kinematic characteristics during rising from a chair. Six stroke patients and three healthy subjects participated in the study. Three dimensional kinematic analysis was used to get the duration, center of mass, and lower extremity angle. The stroke patients performed longer duration(0.28sec) than the healthy subjects in rising from a chair. The stroke subjects stayed longer time than the healthy subjects did in phase 2(From the initiation of knee extension to the reversal of trunk flexion to trunk extension)(t=-1.01, p=.04). The healthy subjects showed longer time than the stroke subjects in phase 3(from the reversal of trunk motion to extension to full standing position). The healthy subjects displayed larger value of center of mass in anterioposterior direction than stroke subjects(t=5.79, p=0.05). The center of mass in the mediolateral direction did not change during the completion of movement. However, the center of mass in the anterioposterior direction began to increase throughout the completion of movement. The center of mass in the vertical direction increased extensively in phase 3. The significant difference was not found in the maximum dorsiflexion in ankle, the initiation angle of knee, and the minimum angle of hip between stroke and healthy subjects. Even though statistical results did not show any significant angle difference in the lower extremity, the patterns of the change in the knee and hip angle during rising from a chair were different. The stroke subjects showed smaller angle of knee extension than the healthy subjects in phase 3. The stroke subjects flexed their trunk more than the healthy subjects in phase 2.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2552-2554
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.205-208
• /
• 2006

We report the recent progress and future prospects of flexible, large-area sensors and actuator using organic thin-film transistors (TFTs). In particular, we describe printing technologies to manufacture electronic artificial skins (e-skins) for robots, sheet image scanners suitable for mobile applications, and Braille sheet display with plastic actuator arrays. We also present recent progress of reliability and stability issues.

• 대한화장품학회지
• /
• 제48권1호
• /
• pp.55-64
• /
• 2022

Cleansing foam이라 불리는 지방산 칼륨 cream soap은 crystal gel 구조로 이루어져 있어 유화계와는 달리 전단응력에 약하며 고온의 보관조건에서 쉽게 분리되는 특성을 보여준다. Crystal gel 구조는 지방산의 종류 및 비율, 중화도, polyol의 종류와 사용량에 따라 크게 영향을 받는다. Crystal gel 구조에 미치는 이들의 영향을 조사하기 위해 water/potassium hydroxide (KOH)/fatty acid ternary system에서 실험을 실시하였다. Differential scanning calorimeter (DSC) 측정 결과 myristic acid (MA) : stearic acid (SA) = 3 : 1 비율에서 공융점(eutectic point)를 갖고 이 혼합비가 가장 안전한 삼성분계(ternary system)를 만든다는 것을 발견했다. 점도 측정과 편광현미경 (POM) 관찰 결과 중화도는 75% 부근이 최적이라고 판단된다. 삼성분계의 melting point (T_m)이 보관온도보다 높을 때, 그리고 crystal phase가 lamellar gel phase로 상 전이가 일어날 때 안정하나 지방산 함량의 증가는 안정성에 거의 영향을 미치지 않는다. 삼성분계에 polyol의 첨가는 T_m을 변화시키고 상전이를 일으키는데 중요한 역할을 한다. 클렌징폼의 구조는 저온 주사전자현미경 (Cryo-SEM), 소각 및 광각 X-선 산란 (SAXS, WAXS) 분석으로 규명하였다. Butylene glycol (BG), propylene glycol (PG), dipropylene glycol (DPG)은 T_m을 낮추어주며 lamellar gel phase 형성을 어렵게 하는 반면 glycerin, PEG-400, sorbitol은 T_m을 상승시키고 lamellar gel phase 형성을 용이하게 하며 안정한 삼성분계를 만든다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.195.1-195.1
• /
• 2016

Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.

• 한국자기공명학회논문지
• /
• 제15권1호
• /
• pp.14-24
• /
• 2011

We have performed Liquid Chromatography-Solid Phase Extraction-NMR (LC-SPE-NMR) analysis for liquid crystalline mixture and elucidated the structures of selected components by NMR spectra. Combining the results of one-dimensional 1H experiments as well as homonuclear and heteronuclear two-dimensional experiments, we could analyze the molecular structure of the liquid crystal singles whose structure had not been interpretable by mass spectrometry alone.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.128-130
• /
• 2006

We introduce 2[MVA] 3300[V] 7-level voltage source inverter system developed by POSCON and describe the main characteristics of inverter system i.e. PWM converter, H-bridge power module, phase shifted carrier PWM The PWM converter is a three-phase boost converter, which operates in a 4-quadrant and in a nearly unit displacement power factor. Experimental waveforms are also presented to verify the proposed method and performance of the developed system.

• 대한화장품학회지
• /
• 제27권1호
• /
• pp.3-15
• /
• 2001

The bilayer forming ability of pseudo-ceramide PC104 in octanoic acid/water/n-octyl $\beta$-D-glucoside mixtures was investigated through the phase diagram. Because of its low solubility in water and of its crystallization, pseudoceramide PC104 was dissolved in octanoic acid, which is nontoxic additive for foods and cosmetics. The mixtures formed four different phases (L1, L2, LC and two phases). Depending on the concentration of PC104 in octanoic acid, the region of each phase was extended or contracted. On the contrary to the region of L2, regions of lamellar phase and L1 phase were expanded. The bilayer-forming ability of PC104 was explained on the basis of concentration of PC104 at interface and interaction between PC104 and octanoic acid. From FT-IR results, it was found that the interactions of PC104’s polar head group with octanoic acid increased as the amount of PC104 in octanoic acid increased. Also emulsion size and size distribution have been studied depending upon the emulsification path. droplets of emulsion prepared from lamellar phase were smaller and more homogeneous compared to those of emulsions formed from L2 phase.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.276-280
• /
• 2007

In this work, caffeine and some catechin compounds + C, EC, EGC, and EGCG were extracted from green tea by using molecular imprinted polymers (MIP) as sorbent materials in a solid-phase extraction (SPE) process known as MISPE (molecular imprinted solid-phase extraction). For synthesis of MIP, caffeine was employed as the template, MAA as the monomer, EGDMA as the crosslinker, and AIBN as the initiator. A solution of caffeine (0.2 mg/mL in methanol) was utilized in the solid extraction cartridges following loading, washing, and elution procedures with acetonitrile, methanol, and methanol-acetic acid (90/10, %v/v) as the solvents, respectively. This solid-phase extraction protocol was applied for the extraction of caffeine and some catechin compounds from green tea. A comparison was made between the results obtained with the MIP cartridges and a traditional C18 reversed-phase cartridge. It was thereupon found that the recovery of caffeine by the MIPbased sorbent used in this work was almost two and four times greater than that by a commercially available C18 material. A quantitative analysis was conducted by high performance liquid chromatography (HPLC) using a C18 column (5 μm, 250 × 4.6 mm) with methanol/water (40/60, %v/v) as the mobile phase at a flow rate of 0.5 mL/min.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.22-29
• /
• 2023

A grid-connected inverter can be used in grid-connected or stand-alone modes. Generally, a grid-connected inverter operates in a grid-connected mode, but the inverter operates in stand-alone mode if grid faults occur. In the stand-alone mode, the grid-connected inverter must supply electric power to a critical load that needs to receive stable power even though grid faults occur. Generally, three-phase loads are used as critical loads, but a single phase is configured in some cases. In these conditions, the critical load is required to unbalance the load power consumption, which makes the three-phase load voltage unbalancd. This unbalanced voltage problem can cause fatal problems to the three-phase critical loads, and thus must be addressed. Hence, this paper proposes an algorithm to solve this unbalanced voltage problem by the individual phase current control. The proposed method is verified using Psim simulation and experiments.