• 한국전자파학회논문지
• /
• 제22권10호
• /
• pp.999-1004
• /
• 2011

본 논문에서는 무선 전력 전송 시스템에서 널리 사용되는 원형 코일 사이의 상호 인덕턴스 계산 방법과 이를 이용한 해석 결과를 제시한다. 두 원형 코일은 수직으로 배열되었다. 상호 인덕턴스 계산을 위해 수직 배열된 수전부 원형 코일의 면적을 일정한 높이의 단위 셀로 나누고, 각 단위 셀에 쇄교하는 자속 밀도를 구하여 상호인덕턴스를 계산하였다. 이를 위해 두 원형 코일을 필라멘트 코일로 모델링하였고, 각 코일에서의 전류는 균일 하다고 하였다. 검증을 위해 헬리컬, 스파이럴 형태로 두 원형 코일을 제작하였고, z 방향의 간격이 50~100 cm인 구간에서 상호 인덕턴스를 측정한 결과, 본 논문에서 제시한 이론값과 일치하였다.

• 한국컴퓨터산업학회논문지
• /
• 제9권3호
• /
• pp.115-120
• /
• 2008

코일에 전류가 서로 수평방향으로 흐를 때 힘이 발생한다. 그러나 코일에 수직으로 완전 교차하면 힘은 0이다. 반 코일 구조를 이용하여 완전수직 교차가 아닌 반만 수직으로 전류가 흐를 때는 힘이 존재함을 적분 방적식으로 풀이 할 수 있다. 수식 모델을 만들어 컴퓨터 씨뮬레이션 할 수 있도록 하고 특히 전기 피스톤에 응용 할 수 있도록 한다.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.210-213
• /
• 2016

This paper presents a wireless power charging system for rechargeable batteries. Recently, misalignment between transmitting coil and receiving coils has been a significant factor to wireless power charging systems, which are prone to lateral and angular misalignment. Unfortunately, the batteries can be easily rolled because of the shape, and coils are often misaligned while charging devices, in practical situations. This paper presents the wireless power battery charging system. In order to solve the angular misalignment, two perpendicular coil having structure of 'plus (+)' shape was proposed. To validate the results, the proposed wireless power charging system was implemented at 6.78 MHz using loosely coupled resonant coils, and the system was verified as being robust to misalignment.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1035-1038
• /
• 2007

We designed and manufactured a 1.8T high temperature superconducting(HTS) insert coil for a NMR magnet operated at 4.2 K. Suitable HTS superconductor and HTS coil were carefully designed and developed. We have selected multi-filamentary Bi2223 conductor fabricated by American Superconductor Corporation(AMSC). The selected conductor consists of Bi2223 filaments of 55, silver stabilizer and stainless steel reinforcement tapes. Therefore, it shows good hoop strength as well as compression tolerance. The conductor has a tape cross-section of 0.31mm x 4.8mm. the Bi2223 conductor shows large anisotropy of critical current. The critical current of conductor in magnetic field parallel to the flat surface are much higher than that in magnetic field perpendicular. The HTS coil has an inner diameter of 78 mm, an outer diameter of 127 mm and a coil length of 600 mm. In this paper, the detailed design, fabrication and test results on the HTS insert coil are presented.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.732-738
• /
• 2004

In this paper, we constructed 13 turns pancake coil and solenoid coil with HTS tape and measured AC losses of the pancake coil. The critical current of the pancake coil and the solenoid coil were 80A and 109A, respectively. To compare measured AC losses of the two coils, we carried out numerical analysis using 2-D FEM program for manufactured coils. This paper presents current density distribution, flux density distribution and AC losses of the pancake coil and the solenoid. As a result, we obtained that current density distribution was closely related to the orientation of magnetic field and distribution of AC losses were also closely related to the perpendicular component of flux density distribution in coil. The calculated AC losses of the two coils showed good agreement with measured AC losses and AC losses of the pancake coil was about 9 times bigger than that of the solenoid coil under the same turns and length.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.45-49
• /
• 2015

It has been well known that a toroid is the inevitable shape for a high temperature superconducting (HTS) coil as a component of a large scale superconducting magnetic energy storage system (SMES) because it is the best option to minimize a magnetic field intensity applied perpendicularly to the HTS wires. Even though a perfect toroid coil does not have a perpendicular magnetic field, for a practical toroid coil composed of many HTS pancake coils, some type of perpendicular magnetic field cannot be avoided, which is a major cause of degradation of the HTS wires. In order to suggest an optimum design solution for an HTS SMES system, we need an accurate, fast, and effective calculation for the magnetic field, mechanical stresses, and stored energy. As a calculation method for these criteria, a numerical calculation such as an finite element method (FEM) has usually been adopted. However, a 3-dimensional FEM can involve complicated calculation and can be relatively time consuming, which leads to very inefficient iterations for an optimal design process. In this paper, we suggested an intuitive and effective way to determine the maximum magnetic field intensity in the HTS coil by using an analytic and statistical calculation method. We were able to achieve a remarkable reduction of the calculation time by using this method. The calculation results using this method for sample model coils were compared with those obtained by conventional numerical method to verify the accuracy and availability of this proposed method. After the successful substitution of this calculation method for the proposed design program, a similar method of determining the maximum mechanical stress in the HTS coil will also be studied as a future work.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.28-32
• /
• 2012

The critical current of the HTS(High Temperature Superconductor) tape is governed by cooling temperature, magnetic field and its angle to HTS tape originated from its geometrical structure. At the HTS coil design stage, the critical current of the coil is calculated by considering the Ic-B characteristics of the 2G tape and the operating current is determined based on the critical current. The operating current and the structure of the 5 T coil are suggested through the FEM (Finite Elements Method) analysis and calculation. As a part of our on-going research on a 20 T LTS/HTS magnet, we have designed and constructed a 5 T HTS insert coil and tested it in liquid helium temperature.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.43-46
• /
• 2007

Solenoid coil is one of the commonly used one in superconducting power machines because it can produce uniform magnetic field at the center of the coil. Most of the AC loss in a solenoid coil is magnetization loss which is generated by the perpendicular magnetic field. This paper compares the electrical characteristics of two solenoid coils made of YBCO wire and BSCCO wire. We made and tested the BSCCO solenoid coil and YBCO solenoid coil which had the same number of turns and inner diameter. Number of turns and inner diameter of both coils were 30 turns and 10cm, respectively. AC loss of both coils were calculated by using the finite element method. Result shows that AC loss of YBCO coil was about 1/7 of that of the BSCCO coil when the current was 40A.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.315-317
• /
• 2002

The value of I$_{c}$(critical current) in HTS (High Temperature Superconducting) tape has a great influence on B(equation omitted) (magnetic field amplitude applied perpendicular to the tape surface). Therefore, I$_{c}$ of HTS magnet is determined by not only operating temperature but also the B(equation omitted). In shape design of field coil for the HTS motor, a method to reduce the B(equation omitted) and to determine operating current should be considered in order to optimal design. On the basis of the magnetic field analysis, this paper deals with various field coil shape to obtain operating current of HTS motor by using analytical method. And also this paper discusses the operating current of 100hp class HTS motor by using I$_{c}$-B(equation omitted) curve.curve.

• 한국광학회지
• /
• 제7권4호
• /
• pp.419-427
• /
• 1996

광섬유전류센서에서 온도변화에 따른 감도변화를 제거하기 위한 연구를 하였다. 센서헤드로는 두개의 원형틀을 수직으로 결합하고 여기에 광섬유를 번갈아 감아서 사용하였다. 이 경우 수직한 원형틀은 광섬유의 고유편광축을 상호수직하게 하므로 감겨진 광섬유에 발생된 선형복굴절량을 상쇄하여 최소화할 수 있었다. 이렇게 제작된 전류센서는 온도에 대해 보다 안정된 성능을 보였다. 센서헤드부의 온도는 약 1시간 40분동안 20-45.deg.C의 느린 변화를 주었다. 이때의 전체적인 센서 오차는 .+-.1.2% 정도였고 500A에서 3시간동안 안정성 측정을 했을 경우 .+-.1%미만의 변화를 보였다. 센서의 헤드부 전후단의 광섬유에 의해서 신호의 요동이 생기는 것을 방지하기 위한 방법으로 센서헤드부에 편광기와 편광분할기를 놓고 리드부와 분리를 했다. 광원으로서는 두개의 레이저 다이오드를 편광이 수직이 되게 배열함으로써 무편광 광원으로서의 효과를 내었다. 신호처리는 각 채널별로 분리를 하여 기계적인 부분에 의한 광손실의 영향을 배제하였다.