• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.389-393
• /
• 2012

Improvement in microwave absorbance has been investigated by insertion of a periodic air cavity in rubber composites filled with magnetic powders. A mixture of $Co_2Z$ hexagonal ferrite and Fe powders were used as the absorbent fillers in silicone rubber matrix. The complex permeability and complex permittivity of the magnetic composites were measured by reflection/transmission technique. In the grid-type magnetic absorbers, the equivalent permeability (${\mu}_{eq}$) and permittivity (${\varepsilon}_{eq}$) are calculated as a function of air volume rate (K) on the basis of effective medium theory. Reduction in the material parameters (especially, dielectric permittivity and magnetic loss) has been estimated with the increase of K. Plotting the ${\mu}_{eq}$ and ${\varepsilon}_{eq}$ on the solution map of wave-impedance matching, wide bandwidth microwave absorbance has been predicted in the magnetic composites with an optimum value of K.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.730-734
• /
• 1995

The variation of magnetic permeability and dielectric constant and their relationship with microwave absorbing properties are investigated in sintered Ni-Zn ferrite. Toroid specimens of ${(Ni_{0.5}Zn_{0.5}O)}_{1-y}{(Fe_{2}O_{3})}_{1+y}$ ferrites are prepared by conventional ceramic processing technique. The large change in magnetic permeability is observed by the variation of excess $Fe_{2}O_{3}$ in the Ni-Zn ferrites. The more the iron-excess from y=0.04 to y=0.12, the lower value of both $\mu_{r}'$ and $\mu_{r}"$ is observed. However dielectric permittivity increases with the increase of the increase of the excess $Fe_{2}O_{3}$. The control of permittivity is realized by nitrogen sintering atmosphere and excess $Fe_{2}O_{3}$ respectively.

• The Korean Journal of Physiology
• /
• 제23권1호
• /
• pp.13-21
• /
• 1989

The present study was designed to investigate i) the action of various nucleotides on membrane permeability of rat red blood cell and hepatocyte for $Na^{+}$ and $Rb^{+}$ ii) the characteristics of purinoceptors on these cell membranes. Blood from Sprague-Dawley rats was obtained by carotid arterial cannulation. Red blood cells were then washed 3 times with saline at $4{\circ}C$. Hepatic parenchymal cells were isolated from rat livers by using a modification of the Berry and Friend (1969) method. For the $Na^{+}$ influx studies, isolated RBC and hepatocyte were incubated in incubation medium containing $^{22}Na^{+}0.2\;{\mu}Ci/ml$ at $37^{\circ}C$. After various time intervals samples were removed from the incubation flask and washed out 3 times with ice-cold washing solutions. Cells were destroyed by adding Triton X-100 and TCA solution. After centrifugation, the supernatants were assayed for $^{22}Na^{+}$ by gamma counter. $^{86}Rb^{+}$ was used to simulate $K^{+}$ in these $K^{+}efflux$ studies. Isolated hepatocytes were incubated for 60 min in the loading solution containing $^{86}Rb^{+}\;10\;{\mu}Ci/ml$ at $37^{\circ}C$. After loading, the cells washed out 3 times by centrifugation with washing solution. The cells were incubated in buffer solution at $37^{\circ}C$. At intervals thereafter, samples were removed and centrifuged. The supernatants were analyzed for $^{86}Rb^{+}$ by liquid scintillation counter. The main results of the experiments were: 1) ATP and ATPP increased in both $^{22}Na^{+}$ influx and $^{86}Rb^{+}$ efflux in the red blood cell. Although ADP showed a tendency to increase in RBC membrane permeability for $^{22}Na^{+}$ and $^{86}Rb^{+}$, the changes were not significantly different from the control. 2) The Significant changes in $^{22}Na^{+}$ and $^{86}Rb^{+}$ flux by ATP were also demonstrated in hepatocyte. ATPP and ADP showed a tendency to increase in hepatocyte membrane permeability for both ions. 3) Other nucleoside triphosphates-ITP, GTP and CTP-did not change in membrane permeability for $^{22}Na^{+}$ and $^{86}Rb^{+}$ in RBC and hepatocyte. In conclusion, not only ATP but also ATPP activate purinoceptors and change in membrane permeability for $Na^{+}$ and $K^{+}$. In order to activate purinoceptors on the cell membrane, the nucleotides have to possess intact adenine moiety and three phosphates or more in its molecule.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.197-202
• /
• 2015

In this study, porous stainless steel (STS316L) sintered body was fabricated by powder metallurgy method and its properties such as porosity, compressive yield strength, hardness, and permeability were evaluated. 67.5Fe-17Cr- 13Ni-2.5Mo (wt%) powder was produced by a water atomization. The atomized powder was classified into size with under $45{\mu}m$ and over $180{\mu}m$, and then they were compacted with various pressures and sintered at $1210^{\circ}C$ for 1 h in a vacuum atmosphere. The porosities of sintered bodies could be obtained in range of 20~53% by controlling the compaction pressure. Compressive yield strength and hardness were achieved up to 268 MPa and 94 Shore D, respectively. Air permeability was obtained up to $79l/min{\cdot}cm^2$. As a result, mechanical properties and air permeability of the optimized porous body having a porosity of 25~40% were very superior to that of Al alloy.

• 한국자기학회지
• /
• 제10권2호
• /
• pp.54-61
• /
• 2000

마그네트론 스퍼터를 사용하여 증착한 CoNbZr 합금박막의 제조 조건 및 열처리에 따르는 구조 및 자기적 성질의 변화를 연구하였다. Ar분압 2mTorr, RF 인가전력 130 W에서 증착되어진 $Co_{87.0}$N $b_{8.5}$Z $r_{4.5}$막은 최대 비저항 3000 $\mu$Ω.cm을 나타냄으로써 가장 안정한 비정질상을 형성하였으며 100 MHz에서 1095의 최대투자율, 1.75 Oe의 최소 보자력을 나타내었다. Ar 분압이 2 mTorr 이상으로 증가할 경우 그리고 RF 인가전력이 130 W 이상으로 증가할 경우 주상정 구조의 발달과 불안정한 비정질상의 형성으로 투자율은 감소하고 보자력은 증가하는 것을 확인하였다 1 mTorr에서 증착되어진 막과 190 W에서 증착되어진 막은 결정질 상을 형성하여 100 이하의 낮은 투자율과 60 Oe의 높은 보자력을 나타내었다. 회전자장중 열처리에 의해 이방성을 제어할 수 있음을 확인하였으며, 증착상태에서 보였던 1095의 투자율은 1345로 증가하였다.증가하였다.

• 멤브레인
• /
• 제27권5호
• /
• pp.406-414
• /
• 2017

본 연구에서는 얇은 폴리에틸렌 계 다공성 필름(두께 = $25{\mu}m$)에 이오노머를 충진시킨 세공충진 이온교환막을 개발하였으며 이를 적용한 전 바나듐 레독스 흐름전지의 충방전 특성을 고찰하였다. 특히 분자 크기가 다른 가교제를 혼합함으로써 이온교환막의 가교도 및 자유체적을 적절히 제어하여 저저항 및 저 바나듐 투과도를 나타내는 이온교환막을 제조하고자 하였다. 실험 결과, 제조된 세공충진 이온교환막은 상용막 대비하여 동등 수준의 우수한 전기화학적 특성을 나타내었다. 또한 바나듐 이온 투과도 및 전 바나듐 레독스 흐름전지 성능 평가 실험을 통해 얇은 막 두께에도 불구하고 상용막 대비하여 낮은 바나듐 이온 투과도와 높은 충방전 효율을 나타냄을 확인하였다.

• 한국자기학회지
• /
• 제12권4호
• /
• pp.154-159
• /
• 2002

벌크 비정질 형성능과 큰 포화자속밀도를 가지는 FeBSiNb계 아몰퍼스 합금 리본을 22~102$\mu\textrm{m}$의 두께 범위에서 단롤형 액체 급냉법으로 제조하였다. 이 합금은 두께 증가에 따라 보자력이 감소하고 최대투자율 및 교류투자율이 증가하였으며, 자기이력곡선의 각형비가 감소하였다. 한편 전기 비저항은 두께와 상관없이 거의 일정한 값을 나타내었다. 또 지구 관찰 결과, 두께가 증가하면 내부 자기 이방성의 변화에 따라 자구가 미세화 되고 보다 복잡한 자구 구조를 갖는 것으로 나타났다. 두께 81$\mu\textrm{m}$인 합금의 경우, 24 mOe의 작은 보자력과 1KHz에서 12,000이상의 높은 실효투자율을 나타내어 일반적인 고 연자성 비정질 합금(두께 약 20$\mu\textrm{m}$)의 특성을 능가하였다. 이와 같은 두꺼운 FeBSiNb 비정질 합금의 우수한 연자성은 자벽이동에 대한 표면 고착 효과의 감소 및 수직자기이방성 성분의 출현과 미세화 된 자구 구조에 그 원인이 있는 것으로 평가되었다.

• 한국자기학회지
• /
• 제14권4호
• /
• pp.131-137
• /
• 2004

이동통신주파수 대역에서 박형의 전파흡수체를 제작하기 위해 순철 분말을 흡수 충진재로 사용한 고무 복합체의 고주파 특성(복소투자율, 복소유전율) 및 전파흡수특성에 대해 조사하였다. 주요 실험변수는 순철 분말의 초기입도와 형상(구형, 압분체) 변화였다. Attrition milling에 의해 두께가 표피두께보다 작은 순철 압분체를 제작함으로써 임피던스정합 조건에 근접하는 고투자율과 고유전율을 동시에 얻을 수 있었다. 이는 milling에 의해 구형에서 평판상으로 모양이 바뀜에 따라 와전류 손실이 감소하고(복소투자율의 증가), 압분체 간의 정전용량이 증가한 것(복소유전율의 증가)에 기인한다. 초기입도가 10$\mu\textrm{m}$인 순철 압분체를 흡수 충진재로 사용함으로써 이동통신주파수 대역(0.8-2.0㎓)에서 반사손실이 -5㏈(70% 전력흡수율), 두께가 0.7mm 수준인 박형의 전파흡수체를 제안할 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권4호
• /
• pp.166-171
• /
• 2005

Shielding methods on ELF(Extremely Low Frequency) magnetic fields may include the use of induced currents, modification of magnetic field flux patterns using high permeability and/or high conductivity materials, and others. The magnetic shielding properties of enclosures can be utilized to reduce the magnetic field of current carrying conductors. In this paper, to get a more practical understanding of shielding phenomena, we have investigated the magnetic field reduction by means of 3 dimensional numerical analysis and experiments. We found copper could reduce flux density more then permalloy in both cases of box shield and cylindrical shield. Iron under l0$\mu$T of 1 phase could reduce flux density about $20\%$ more than silicon steel, but both of them under 50$\mu$T has a similar reduction rate of $10\%$. The 3 phase horizontal model gave the highest reduction rate and the 1mm thickness iron under 10$\mu$T of 3 phase lines did lowest.

• 한국환경보건학회지
• /
• 제30권2호
• /
• pp.65-70
• /
• 2004

Hair is based upon the skin which enroll the body of high living animals and have multiple membrane structure. This study were used rats and carried out to find out the effects of commercial permanent wave products to skin which are composed of thioglycolic acid and bases. Results were as follows. Permanent wave penetrated to 3 hours later with steady state in skins and was not significant changeable after 20hr later. In case of neutralizer with thioglycolic acid lag time and permeability coefficient in healthy skin were 3.38hr and 0.96$\mu\textrm{g}$/$\textrm{cm}^2$/hr, in old skin were 3.14hr and 0.l28$\mu\textrm{g}$/$\textrm{cm}^2$/hr, and in wounded skin were 3.08hr and 0.157$\mu\textrm{g}$/$\textrm{cm}^2$/hr. In conclusion, lag time and permeability coefficient in old skin and wounded skin were faster than healthy skin. In vivo which was studied by general time and method of permanent wave. We found out that fine rinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin. Also, permanent wave drugs could induced rash and eruption at the skin by the naked eye.