• Korean Journal of Metals and Materials
• /
• v.49 no.7
• /
• pp.530-534
• /
• 2011

To analyze the effect of the pore size of graphite in a pore-forming agent, graphite was added to porous ceramics of $Al_2O_3-SiO_2-ZrO_2$ systems. The graphite had 45~75, 100~125, 150~180, and 75~180${\mu}m$ dimensions. The properties of the ceramics, such as apparent porosity, density, dynamic elastic modulus, mechanical strength, and permeability, were investigated. The average pore size increased from 15.35${\mu}m$ to 22.32${\mu}m$ with the increase of the graphite size. The sample with the largest average pore size showed the highest mechanical strength and gas permeability. This was due to the sample with the largest pore size at the same porosity having fewer pores and larger distance between the pores than the sample with the smallest pore size, making cracks less likely to propagate. In addition, the large pore size reduced the repulsive power originating from the drag force between the gas and internal pore walls.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.94-99
• /
• 1994

This work addresses the relationship between initial complex permeability and porosity in polycrystalline Mg-ferrite material. The initial permeability corresponds to Snoek theory except the sample with large grains. The frequency which initial real permeability, $\mu$' equal 1 due to domain rotation are found in the frequency range 50-80 [MHz]. Internal magnetic field which is considered as mainly anisotropy field is 100[Oe] which is obtained from the relationship between initial complex permeability and porosity in polycrystalline Mg-ferrite material. This is almost the half value of reported anisotropy field of single Mg-ferrite. The difference between them is almost due to domain wall effect in polycrystalIine Mg-ferrite material.

• International Journal of Concrete Structures and Materials
• /
• v.19 no.1E
• /
• pp.41-48
• /
• 2007

Addition of latex to concrete is known to increase its durability and permeability. The purpose of this study is to analyze air void systems in latex-modified concretes using a reasonable and objective method of image analysis with such experimental variables as water-cement (w/c) ratios, latex contents (0%, 15%) and cement types (ordinary portland cement (OPC), high-early strength (HES) cement and very-early strength (VES) cement). The results are analyzed by spacing factor, air volume (content) after hardening, air void distribution and structure. Additionally, air void systems and permeability of latex-modified concrete (LMC) are compared by a correlation analysis. The results are as follows. The LMC of the same w/c ratio showed better air entraining (AE) effect than OPC with AE water reducer. The VES-LMC showed that the quantity of entrained air below $100{\mu}m$ increased more than four times. For the case of HES-LMC, microscopic entrained air between the range of 50 to $500{\mu}m$ increased greater than 7 times even in the absence of anti-foamer. Although spacing factor was measured rather low, the permeability of latex-modified concrete was good. It is construed that air void system does not have a considerable effect on the property of latex-modified concrete, but latex film (membrane) has a definite influence on the durability of LMC.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.60-61
• /
• 2003

Theoretical considerations on a giant magneto-impedance (GMI) effect in amorphous ribbons (i.e., thin films) have been made in terms of the expressions of effective permeability and impedance derived in the frame of classical electrodynamics and ferromagnetism. The dependence of GMI effect on the external do magnetic field (H$\_$ext/) and the frequency of alternating current are simulated and discussed in the knowledge of energy conversion consisting of the current energy loss, the ferromagnetic energy consumption, and the magnetic energy storage in the film. The obtained results are summarized as follow: (a) As frequency f< 20 ㎒, the real part of effective permeability (${\mu}$′) changes slightly. The peak of the ${\mu}$′curve always locates at H$\_$ext/=H$\_$ani/ - the anisotropy field. However, the peak value of ${\mu}$′ tends to increase with increasing frequency in the frequency range of 11-20 ㎒. (b) In the frequency range, f= 21-23 ㎒, a negative peak additionally appears. Meanwhile, both the positive and negative peak values rapidly increase with increasing frequency and their peak positions shift towards a high H$\_$ext/. (c) The positive peak value of ${\mu}$′ starts to decrease at f= 29 ㎒ and its negative peak does so at about 35 ㎒. Then, both peaks keep such a tendency and their peak positions move to high H$\_$ext/, as increasing frequency. (d) The dependence of the imaginary part of effective permeability (${\mu}$") on the external dc magnetic field and the frequency of the alternating field indicates that there is only one peak involved in ${\mu}$" for the whole frequency range. (e) The impedance vs. magnetic field curves at various frequencies show that there is a critical value of frequency around f= 18-19 ㎒ where the transition between two frequency regimes occurs; the one (low frequency) in which ${\mu}$′ predominantly contributes to the GMI effect and the other (high frequency) in which ${\mu}$" determines the GMI effect.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.391-402
• /
• 2017

The purpose of this study was to improve the nutrition and the permeability of functional plants by using cryogenic grinding technology. Barley sprouts, Curcuma longa L., Dendropanax morbifera LEV., Phellinus linteus were dried, ground and extracted in different temperature conditions. Powder size of barley sprouts and Curcuma longa L. were about $50{\mu}m$ and Dendropanax morbifera LEV. and Phellinus linteus were about $20{\mu}m$. Cryogenic ground of Barley sprouts preserved 18.27-124.65% of nutrients such as protein, ash, carbohydrate, beta carotene, minerals, vitamins. Cryogenic grinding powder of Curcuma longa L. show high nutrients retention rate of lipid and carbohydrate. Permeability was measured by Parallel Artificial Membrane Permeability Assay (PAMPA) to predict passive gastrointestinal absorption. Permeability of saponarin, which is marker compound of Barley sprouts, is 9.88 times higher in cryogenic grinding powder than ambient grinding powder. Curcumin permability is 3.1 times higher than ambient grinded powder. As a result, particle size, nutrition, protein digestion degree and permeability demonstrated a positive relationship with the decreasing grinding temperature for the powders. These results confirm that the cryogenic grinding method had good suitability to increase functionality of plants, since it could minimize the heat generated while processing and effectively reduce the particle size.

• Preventive Nutrition and Food Science
• /
• v.16 no.2
• /
• pp.174-178
• /
• 2011

The cell permeability and cytotoxic effects of different-sized zinc oxide (ZnO) particles were investigated using a human colorectal adenocarcinoma cell line called Caco-2. Morphological observation by scanning electron microscopy revealed that three zinc oxides with different mean particle sizes (ZnO-1, 20 nm; ZnO-2, 90~200 nm; ZnO-3, $1\sim5\;{\mu}m$) tended to aggregate, particularly in the case of ZnO-1. When cytotoxicities of all three sizes of zinc oxide particles were measured at concentration ranges of $1\sim1000\;{\mu}g$/mL, significant decreases in cell viability were observed at concentrations of $50\;{\mu}g$/mL and higher. Among the three zinc oxides, ZnO-1 showed the lowest viability at $50\;{\mu}g$/mL in Caco-2 cells, followed by ZnO-2 and ZnO-3. The permeate concentration of ZnO-1 from the apical to the basolateral side in the Caco-2 model system after four hours was about three-fold higher than that of either ZnO-2 or ZnO-3. These results demonstrated that ZnO-1, with a 20 nm mean particle size, had poorer viability and better permeability in Caco-2 cells than ZnO-2 and ZnO-3.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.73-78
• /
• 2001

Hair will be persuit of beautifulness of human being in various permanent wave by many kinds of its drugs. Skin is based upon the hair which enroll the body of high living animals and have multiple membrane structure In this study used rat the effects of commercial permanent wave products to skin which are composed with L- cysteine and bases Results are as follow: the content of penetration 4 hors later with steady state and no significant changeable after 20 hours later. In cysteine groups, lag time and permeability coefficient of healthy skin is 2.22hr and 0.13$\mu\textrm{g}$/㎥ hr, lag time and permeability coefficient of old skin is 4.01 hr and 0.108 $\mu\textrm{g}$/㎥ hr . In conclusion of study lag time and permeability coefficient in old skin and wounded skin are faster than healthy skin. We notified that fine rinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin.

• Archives of Pharmacal Research
• /
• v.24 no.3
• /
• pp.224-228
• /
• 2001

DA-5018, a recently synthesized capsaicin analog, appears to possess potent analgesic activity when administered topically. The objective of this study is to test the feasibility of the topical administration of this compound. Specifically, our goal was to identify vehicle system that permit a reasonable transdermal permeation of the compound in mice. Among the vehicles examined, isopropyl myristate (IPM) showed the largest in vitro permeability across the intact skin (83.6 ${\pm}$ 5.42${\mu}$l/$\textrm{cm}^2$/h ). However, due to the limited solubility of DA-5018 in IPM (0.53 mg/ml), the maximal flux from the IPM medium remained at only 44.3 ${\pm}2.87{\mu}$g/$\textrm{cm}^2$/hr. In order to increase the flux, addition of better solvents for DA-5018 was attempted, under the assumption that flux is the result of both solubility and permeability. Ethoxydiglycol (EG) and oleic acid (OA) were selected as examples of food solvents. The addition of IC or OA to IPM at a 1:1 volume ratio resulted in a comparable increase in the solubility of the compound (i.e., to 61.1 and 50.2 mg/ml for EG and OA, respectively). However, the addition of EG at a 1:1 volume ratio, for example, increased the flux 6.3 fold (i.e., $279{\mu}$g/$\textrm{cm}^2$/hr), while OA, at a 1:1 volume ratio, decreased the flux 5 fold (i.e., $9.26{\mu}$g/$\textrm{cm}^2$//hr). The mechanism of this discrepancy between EG and OA was investigated by measuring the permeabilty of DA-5018 across the stratum corneum-removed skin of the mouse, under the hypothesis that the viable skin layer may serve as a barrier for the permeation of lipophilic substances such as DA 5018. The permeability of DA-5018, from the medium of EG or OA, across the viable skin differed greatly for EG ($0.41{\mu}$l/$\textrm{cm}^2$/hr) and OA ($0.086{\mu}$l/$\textrm{cm}^2$/hr), suggesting that a higher permeability across the viable skin layer is needed for the second solvents. The maximum flux across the intact skin was achieved for DA-5018 when EG was added to IPM at a 1:1 volume ratio. Thus, the use of a binary system appears to be the best approach for realizing the transdermal delivery of DA-5018 at a reasonable rate.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.500-503
• /
• 1995

The magnetic properties of ultrathin $Fe_{84}B_{9}Nb_{7}$ nanocrystalline ribbon alloy with the thickness of $7-14\;\mu\textrm{m}$ were investigated. It was found that the effective permeability at the frequency over 100 kHz increased with decreasing ribbon thickness. Moreover the core loss decreased considerably with reduction of the ribbon thickness. The effective permeability at 1 MHz and the core loss at 1 MHz and 0.1 T for $Fe_{84}B_{9}Nb_{7}$ alloy with the thickness of $7\;\mu\textrm{m}$ were 3,700 and 2.7 W/cc, respectively. The reduction of thickness to less than $10\;\mu\textrm{m}$ was found to be very effective in obtaining high permeability and low core loss in the MHz frequency range. It was considered that the improvement of magnetic properties in the high frequency range was due to the reduction of the eddy current.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.473-477
• /
• 2017

The polymer membrane of proton exchange membrane fuel cell (PEMFC) has a great influence on PEMFC performance and durability. In this study, hydrogen permeability, fluorine emission rate (FER), lifetime, and performance of Nafion membranes with different thicknesses were measured to investigate the effect of thickness of polymer membrane on performance and durability. The relationship between membrane thickness and lifetime was obtained from the relationships between hydrogen permeability and membrane thickness, hydrogen permeability and FER, FER and lifetime. As the membrane became thicker, the hydrogen permeability and FER decreased and the lifetime increased. On the other hand, the performance decreased with increasing membrane resistance. The membrane thickness range satisfying both performance and durability was 25 to $28{\mu}m$.