• 제목/요약/키워드: Peripheral Device

검색결과 158건 처리시간 0.034초

IOT 환경의 주변 디바이스 탐색 알고리즘 설계 (A Study on the Peripheral Devices Search Algorithm Design of IoT Environment)

  • 황종선;김웅준;정인용;정회경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 춘계학술대회
    • /
    • pp.606-608
    • /
    • 2015
  • IoT 환경에서 디바이스간의 관계를 맺기 위해서는 디바이스를 탐색하는 작업이 선행되어야 한다. 주변의 디바이스를 탐색하기 위해 새로운 디바이스는 탐색 신호를 송신하고 이를 수신하는 디바이스는 신호의 세기를 판별하여 송신한 디바이스와의 거리 정보를 파악한다. 기존에 사용되고 있는 M2M(Machine to Machine) 방식은 하나의 디바이스에서 주변의 모든 디바이스에게 탐색 신호를 보내고, 주변의 디바이스들이 증가할수록 탐색 시간이 길어지고, 원거리의 디바이스일수록 정보의 손실이 발생하는 문제점이 존재하였다. 본 논문에서는 기존의 디바이스 탐색 방식의 문제점을 보완할 방법으로 새로운 디바이스가 주변의 디바이스를 탐색할 때의 탐색 시간을 단축하고, 근거리의 디바이스와의 탐색 신호를 주고받을 때의 정보 손실을 줄이기 위해 SNR(Signal to Noise Ratio)의 세기를 높일 수 있는 알고리즘을 제안한다.

  • PDF

Peripheral Blood Flow Velocity and Peripheral Pulse Wave Velocity Measured Using a Clip-type Pulsimeter Equipped with a Permanent Magnet and a Hall Device

  • Kim, Keun-Ho;Lee, Sang-Suk
    • Journal of Magnetics
    • /
    • 제20권1호
    • /
    • pp.47-51
    • /
    • 2015
  • We measured radial arterial pulse signals using a prototype of a clip-type pulsimeter equipped with a permanent magnet and a Hall device, which produced signals through a voltage-detecting circuit. The systolic peak time and the reflective peak time for a temporally pulsed signal were analyzed for an arbitrary pulse wave at one position of a small permanent magnet. The measured value of the peripheral pulse wave velocity was about 1.25-1.52 m/s, demonstrating the accuracy of this new method. To measure the peripheral blood flow velocity, we simultaneously connected the radial artery pulsimeter to a photoplethysmography meter. The average value of the peripheral blood flow velocity was about 0.27-0.50 m/s.

Thermal Burn Injury from a Forced-Air Warming Device in an Anesthetized Dog with Peripheral Hypoperfusion

  • Lee, Sungin;Lee, Aeri;Lee, Maro;Kim, Wan Hee
    • 한국임상수의학회지
    • /
    • 제37권6호
    • /
    • pp.331-335
    • /
    • 2020
  • A 13-year-old female Poodle presented with gallbladder rupture caused by a mucocele and hypoperfusion. The animal had a thermal burn injury caused by a forced-air warming device used for hypothermia during surgery. This could be attributed to two causes. First, the forced-air warming device was used with direct hosing, without attachment to an air blanket, and the heat was concentrated in a single area. Second, perioperative peripheral hypoperfusion hampered heat dissipation and increased the susceptibility to a burn injury. These findings suggest that an air blanket should be used with a forced-air warming device according to the manufacturer's instructions. Furthermore, patients with peripheral hypoperfusion are at a higher risk of burn injuries and require close monitoring.

AMBA 시스템을 통한 주변장치 테스트 (Peripheral Device Test with AMBA System)

  • 김웅;정갑천;박성모
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
    • /
    • pp.317-320
    • /
    • 2002
  • Recently, AMBA(Advanced Microcontroller Bus Architecture) is used as common system bus at embedded system. In this paper, we described test method of peripheral device which is connected to AMBA according to the bus interface defined by AMBA protocol We implemented one of the APB(Advanced Peripheral Bus) peipheral module, GPIO(General Purpose Input/output), and tested its functionality as il is connected to the AMBA system.

  • PDF

VHDL을 이용한 향상된 기능을 가지는 모터 제어용 주변장치의 통합 설계 (Design of the Unified Peripheral Device with Advanced Functions for Motor Control using VHDL)

  • 박성수;박승엽
    • 제어로봇시스템학회논문지
    • /
    • 제9권5호
    • /
    • pp.354-360
    • /
    • 2003
  • For the convenient use of high performance microprocessor in motor control, peripheral devices are needed for converting its control signals to compatible ones for motor drive. Customized devices are not plentiful far these purposes and their functions do not usually satisfied designers specification. The designers used to implement these functions on FPGA or CPLD using hardware description language. Then, in this case unessential programs are needed for control the peripherals. In this paper, a unified device model that links peripheral devices, including especially the pulse width modulation controller and the quadrature encoder interface device, to an interrupt controller is proposed. Advanced functions of peripherals could be achieved by this model and unessential programs can be simplified. Block diagrams and flowcharts are presented to illustrate the advanced functions. This unified device was designed using VHDL. The simulation results were presented to demonstrate the effectiveness of the proposed scheme.

하지 (下脂) 조직내의 말초 혈관계 질환 진단을 위한 산소 측정장치의 개발에 관한 연구 (A study on the development of oxygen measurement device for diagnosis of peripheral vascular disease in lower extremity)

  • 임현수;이준규;박동철
    • 한국의학물리학회지:의학물리
    • /
    • 제10권1호
    • /
    • pp.9-15
    • /
    • 1999
  • 혈액에서의 산소 포화도는 Hb와 HbO$_2$의 광학 스펙트라에서 흡수계수의 차이에 의해서 측정할 수 있다. 본 연구는 하지 조직에서 발생하는 말초혈관계 질환진단을 위하여 파장이 660nm 와 940nm의 LED를 이용하여 산소포화도를 측정하는 장치를 개발하였다. 산소측정장치는 광 탐촉자와 광 신호처리부, LED 구동회로, 컴퓨터와 인터페이스로 구성하고, 데이터의 수집과 분석을 위한 프로그램 을 개발하였다. 구현된 산소측정장치에 대한 임상적인 평가를 위하여 하지조직에서 운동 부하에 따른 실험을 하여 생체조직내 생리적변화에 따른 산소량의 변화를 측정하고, 기기의 성능을 평가하였다. 실험결과 생체조직내의 산소포화도는 광원과 검출기의 간격에 따라 측정이 가능함을 보여 주었다.

  • PDF

블루투스-LE 기반 심전도/근전도/맥박 무선 모니터링 회로 및 시스템 구현 (Implementation of a Bluetooth-LE Based Wireless ECG/EMG/PPG Monitoring Circuit and System)

  • 이욱준;박형열;신현철
    • 전자공학회논문지
    • /
    • 제51권6호
    • /
    • pp.261-268
    • /
    • 2014
  • 본 논문에서는 저전력 블루투스인 블루투스-LE를 기반으로 하여 심전도, 근전도, 맥박 신호의 무선 모니터링 시스템을 설계 및 구현하였다. 심전도와 근전도 신호를 얻기 위한 센서 인터페이스 아날로그 회로부는 상용칩을 이용하여 설계 및 제작하였다. 저전력 블루투스 통신 모듈로는 Texas Instruments에서 제공하는 CC2540DK를 이용하였다. 2개의 CC2540DK를 사용하여 각각 Peripheral과 Central 노드 역할을 하도록 했다. Peripheral은 획득한 아날로그 생체신호를 ADC를 이용해 디지털 신호로 변환한 후 무선으로 Central로 전송하는 역할을 한다. Central은 Peripheral로부터 데이터를 수신한 후 UART 통신을 통해 PC로 전송한다. 전송된 생체신호는 그래픽 사용자 인터페이스를 통해 파형 또는 결과값의 형태로 표시된다. 이와 같은 시스템은 블루투스 4.0기반 무선 생체신호 모니터링 헬스케어 시스템에 적극 활용될 수 있을 것이다.

멀티미디어 시스템을 위한 확장된 ATA 인터페이스 설계 (A Design on the Extended ATA Interface for Multimedia Systems)

  • 구대성;김종빈
    • 한국통신학회논문지
    • /
    • 제30권4A호
    • /
    • pp.345-349
    • /
    • 2005
  • 본 논문에서는 PC에서 사용하고 있는 주변기기를 연결하기 위한 범용 인터페이스의 성능과 구조를 개선하기 위하여 ATA(AT Attachment Interface with Extension)의 성능 및 SCSI(Small Computer System Interface)의 지능적인 동작의 장점들을 결합한 확장된 ATA 인터페이스를 구현하였다. SCSI버스는 지능적인 동작을 수행하는 주변기기를 위한 버스로써 잘 정리된 명령체계와 안정된 하드웨어 구조를 갖는 우수한 버스이다. 그러나 가격이 ATA주변기기에 비하여 2배 이상 차이나기 때문에 경제적으로 부담을 갖는다. 반면에 ATA주변기기는 초기에는 저성능이었으나, 개선 후 속도 측면에서 SCSI에 근접하고 경제적 측면에서도 우수하다. 본 논문에서는 이와 같은 장점을 이용하여 경제적 특성과 성능을 모두 만족시킬 수 있는 개선된 인터페이스 구조를 제안하고 하드웨어로 구현하였다.

32-bit RISC마이크로프로세서를 위한 버스 설계 및 구현 (Design and Implementation of Bus for 32-bit RISC Microprocessor)

  • 양동훈;곽승호;이문기
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
    • /
    • pp.333-336
    • /
    • 2002
  • This paper purpose design and implementation of system bus for the effective interconnection between peripheral device and 32-bit microprocessor. The designed system bus support general bus protocol. Also, it is optimized for 32-bit microprocessor. It is divided into two system. high performance system bus and Peripheral system bus.

  • PDF

다채널 신경전극 어레이를 이용한 말초 신경신호의 측정 및 분석 (Recording and Analysis of Peripheral Nerve Activity Using Multi-Electrode Array)

  • 추준욱
    • 재활복지공학회논문지
    • /
    • 제10권4호
    • /
    • pp.279-285
    • /
    • 2016
  • 신경보철 의수를 제어하기 위해서는 말초 신경신호를 측정하고 분석함으로써 사용자의 동작의도를 인식해야 한다. 본 논문에서는 다채널 신경전극 어레이, 전극 삽입 장치, 신경신호 증폭기로 구성된 말초 신경신호 측정 시스템을 제안한다. 마취상태에서 전극 삽입 장치를 이용하여 16 채널의 신경전극 어레이를 백서의 좌골신경에 안정적으로 삽입하였다. 수동적 관절 운동을 유도하거나 기계적 피부 자극을 인가하였을 때, 신경신호 증폭기를 통해 근육 또는 피부 감각 신경신호가 측정됨을 확인하였다. 또한, 개별 신경 단위를 분리하기 위해 활동전위 분류방법을 제안한다. 근육의 내부 수용기들은 근방추와 골지건 기관 수용기로 구분되었으며, 피부의 외부 수용기들은 완만적응과 급속적응 수용기로 분리되었다. 이와 같은 실험결과는 제안한 방법이 신경보철 시스템에서 말초 신경신호의 측정과 분석에 적용될 수 있음을 보였다.