• Journal of applied mathematics & informatics
• /
• v.29 no.3_4
• /
• pp.547-562
• /
• 2011

We establish a new formalism of the non-periodic autocorrelation function (NPAF) of two sequences, which is suitable for the computation of the NPAF of any two sequences. It is shown, that this encoding of NPAF is efficient for sequences of small weight. In particular, the check for two sequences of length n having weight w to have zero NPAF can be decided in $O(n+w^2{\log}w)$. For n > w^2{\log}w$, the complexity is O(n) thus we cannot expect asymptotically faster algorithms.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.3
• /
• pp.1-14
• /
• 1971

A relay servo, one of the nonlinear sytsems, is inherently compact compared to a linear system for an equivalent control problem. The power element or actuator is not adjusted proportionally in accordance with an error signals but rather is switched abruptly between several discrete conditions. Usually switched conditions are off, full, forward or full reverse. The relay system is a particularly simple and compact one, but probably more effort has been expended on its analysis and design than on all other systems together. Early studies in the art were made by Goldfarb, austin, Oppelt and Kochenburger on the describing function method, which can be used as an approximate check on the stability of the system. The describing function method is based on the assumption that any periodic wave could be approximated as a fundamental one in wide ranges of practical applications. A relay servo system usually operates on a limit cycle condition as the loop gain increases. The stability analysis compensation or any improvement effort based on the describing function method sometimes may present considerable discrepancies on physically realized practical systems. An approach to exact periodic solutions of a relay servo system is much important for the analysis, design and system improvement. This paper dells with periodic solutions of a relay servo system on the basis of describing function and generalized chopper wave form which is composed of infinite number of harmonic series. Various ways of graphical representation were attempted to get periodic solutions, some of which have shown its validity in rapid approach to exact solutions and also in judgement of system behavior.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.396-402
• /
• 1998

The measurement of OTF(optical transfer function) is used for evalution of imaging performance of optical system as a standard method. In the mass-production, the contrast measurement of projected patterns is also popular because of its simplicity. In this study, a computer program which evaluates the CTF(contrast transfer function) of optical system for periodic line-space patterns is developed by using the diffraction imaging theory. The MTF(modulation transfer function) and CTF of an aberrated system are evaluated and analyzed for the third order aberrations expressed by the C-coefficients and the Zemike polynomials.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.84-86
• /
• 2005

The digital systems such as PLC or DCS have been applied to non-safety systems of nuclear power plants because of many difficulties in using analog systems. Nowadays, digital systems have been applied to safety systems of the plants such as reactor protection system. One of the main advantages of digital systems is applicability of automatic testing methods to the systems. The protection system requires high-reliability and high-availability because it shall minimize the propagation of abnormal or accident conditions of nuclear power plants. The calculation of reliability and availability of systems depends on the maintenance period of the system. In general, the maintenance period of the protection system is one-month in case of the manual test. However, the cycle of test can be shortened in several hours by using automatic periodic testing. The reliability and availability of the system is better when test period is shortened because the reliability and availability is inverse proportion to the test period. In this research, we developed the automatic periodic testing method for KNICS Reactor Protection System, which can test the system automatically without an operator or a tester. The automatic testing contained all functions of reaction protection systems from analog-to-digital conversion function of the bistable Processor to the coincident trip function of the coincident processor. By applying the automatic periodic testing to reaction system, the maintenance cost can be cut down and the reliability can be increased.

• Tribology and Lubricants
• /
• v.14 no.4
• /
• pp.121-127
• /
• 1998

In this study, a numerical procedure to solve a contact problem has been developed. The procedure takes advantage of signal processing technique in frequency domain to achieve shorter computing time. Boussinesq's equation was adopted as the response function. This procedure is applicable to a non-periodic surface profile as well as a periodic one. The validity of this procedure has been established by comparing the numerical results with the exact solutions. The fastness of this procedure was shown in comparison with other algorithm.

• Journal of the Korean Mathematical Society
• /
• v.32 no.4
• /
• pp.785-802
• /
• 1995

It is well known that every periodic function $f \in L^p([0,2\pi]), p > 1$, can be represented by a convergent trigonometric series called the Fourier series of f. Uniqueness of the representing series is very important, and we know that the Fourier series of a periodic function $f \in L^p([0,2\pi])$ is unique.

• Journal of Biomedical Engineering Research
• /
• v.10 no.3
• /
• pp.323-330
• /
• 1989

Large bias errors which occur during a numerical evaluation of the Rayleigh's integral is not due to the replicated source problem but due to the coincidence of singularities of the Green's function and the sampling points in Fourier domain. We found that there is no replicated source problem in evaluating the Rayleigh's integral numerically by the reason of the periodic assumption of the input sequence in Dn or by the periodic sampling of the Green's function in the Fourier domain. The wrap around error is not due to an overlap of the individual adjacent sources but berallse of the undersampling of the Green's function in the frequency domain. The replicated and overlApped one is inverse Fourier transformed Green's function rather than the source function.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.4
• /
• pp.1241-1252
• /
• 2015

In this paper, we study the dynamical bifurcation of the modified Swift-Hohenberg equation on a periodic interval as the system control parameter crosses through a critical number. This critical number depends on the period. We show that there happens the pitchfork bifurcation under the spatially even periodic condition. We also prove that in the general periodic condition the equation bifurcates to an attractor which is homeomorphic to a circle and consists of steady states solutions.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.367-377
• /
• 2006

This paper develops a periodic preventive maintenance(PM) policy following the expiration of warranty. Two types of warranty are considered: renewing warranty and non-renewing warranty. Also, we consider the situation where each PM cost is an increasing function of the PM effect. We determine the optimal number of PM's before replacing the system by a new one and the optimal length of period for the periodic PM following the expiration of warranty. Explicit solutions to determine the optimal periodic PM are presented for the Weibull distribution case.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1169-1175
• /
• 2009

In this paper, the inferences of data obtained from periodic inspection and type I censoring for the step-stress accelerated life test are studied. The exponential distribution with a failure rate function that a log-linear function of stress and the tampered failure rate model are considered. The maximum likelihood estimators of the model parameters are estimated and also the optimal stress change time which minimize the asymptotic variance of maximum likelihood estimators of parameters is determined. A numerical example will be given to illustrate the proposed inferential procedures and the sensitivity of the asymptotic variance of the estimated mean by the guessed parameters is investigated.