• Journal of Radiation Protection and Research
• /
• 제25권2호
• /
• pp.99-107
• /
• 2000

플라즈마 아크 용융방식 유리화 시험설비의 계통내 기체 및 최종배출구 전단의 배기체를 분석함으로써 배기체중에 포함된 분석용 첨가물의 거동 및 배기가스 처리장치의 제염성능을 평가하였다. 중금속 물질(Pb, Cd, Hg), 방사성 모의물질(Co, Cs) 그리고 방사성핵종($^{60}Co,\;^{137}Cs$)을 분석용 첨가물로 사용한 실험결과로부터 첨가물질의 거동에 따른 유리화 설비 배기체처리시스템의 제염특성 및 제염제수를 구하였다.

• 한국강구조학회 논문집
• /
• 제14권2호
• /
• pp.375-383
• /
• 2002

콘크리트 충전강관(CFT) 기둥의 하부압입공법의 시공성을 평가하기 위해 6개의 실대규모 시험체에 대한 시험시공을 실시하였다. 시험체의 규모는 4개층 규모의 12.8m높이로 하여 콘크리트 압입 높이가 12m가 되도록 하였다. 사용된 콘크리트는 설계기준강도 $450kgf/cm^2$ 급의 고성능콘크리트이며 콘크리트 펌프는 국내에서 일반적인 시공시 사용하는 것을 채택하였다. 시공중 배관 및 펌프의 압력변화 특성, 콘크리트의 물성변화 등을 계측하여 시공성을 평가하였고 콘크리트가 굳은 후 기둥을 해체하여 콘크리트의 충전상태, 기둥높이에 따른 콘크리트 강도의 분포 등을 검사하여 콘크리트 품질을 확인하였다. 실험결과로부터 기본적인 압력특성 데이터를 제시하였으며 콘크리트의 충전성과 강도특성도 양호한 것을 확인할 수 있었다.

• 대한기관윤리심의기구협의회지
• /
• 제5권1호
• /
• pp.14-20
• /
• 2023

Purpose: To obtain fundamental data on selection tools for an internal audit and develop a new guideline. We scored the indicated points from the internal audit, identified the research progress and problems that occurred, and confirmed the validity of the risk factors involved. Methods: Of the 63 internal audits conducted by Keimyung University Dongsan Hospital from 2014 to 2021, we analyzed 55 clinical trials with an inspection checklist. We excluded 8 that failed to transfer data and refused to comply with the internal audit. The statistical summary of the collected data was verified and interpreted by using frequency analysis and a chi-square test. Result: Of total 55 cases included in the internal audit, sponsor-initiated trial (SIT) was 63.6% (vs. investigator-initiated trial [IIT]), clinical trial for investigational drug was 71.0% (vs. nonclinical or clinical trial for investigational device), domestic multicenter trial was 60.0% (vs. single center or multinational multicenter trial), and trial requisition for MFDS approval was 69.1% (vs. exception for MFDS approval). The 10 areas of the clinical trial inspection checklist (reports, protection of subjects, compliance with protocols, records, management of investigational drug and/or device, delegation of duties, qualification of investigators, management of specimen, contract-agreement and approval of protocols, and preservation of recorded documents) were weighted between 2 to 5 points. The average of the total points was 16.09±13.2 and 20 clinical trials were above the average. As a result of comparing the average of the total points weighted by year, the highest score was in 2020. The 4 factors that play significant roles in determining the internal quality were (1) principal subjects that initiated the clinical trials (p=0.049), (2) type (p=0.003), (3) phase of clinical trials (p=0.024), and (4) number of registered subjects reported at the time of continuing deliberation (p=0.019). Of the 10 areas of the clinical trial inspection checklist, 'record' was the most inappropriate and insufficient. We found more indicated points; the quality of performance declined in IIT, nonclinical trials, and other clinical trials that were not in phase I1-IV4, and the study of more than 30 registered subjects at the time of continuing review. Conclusion: If an institution has an internal audit selection tool that reflects the aforementioned risk factors, it will be possible to effectively manage high-risk studies; thereby, contributing to an efficient internal audit and improving the quality of clinical trials.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.47-52
• /
• 1993

Admixtures for concrete placed underwater have been developed to the stage that they are now widely used. The use of this type of product allows concrete to be placed underwater with far less risk than was previously possible. One of the problems facing users of underwater concreting admixtures is how does one test such products in order to access their performance initially while minimizing the expense of carrying out site trials. This paper will introduce three categories of laboratory test for underwater concrete listed next : fluidity test, non-segregation test, strength test. Trial underwater concretes were ordinary Portland cement. Strength and workability development and segregation resistance properties of the concrete under the coexistence of some kinds of superplasticizer were studied for this laboratory tests.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1445-1449
• /
• 1996

To evaluate of active suspension, it is necessary for special equipment - so called Test Rig which can perfectly realize the road condition and the impact from the road. And most of the test rig systems controlling force accurately and rapidly consist of electro-hydraulic servo mechanism, and they need robust controller which can endure outer road change. But in the case of PID controller, we should choose its best gains by trial and error method, and once its gains are fixed, they cannot get changed, so we should reset PID controller gains respectively when the road is changed. Therefore based on the load pressure feedback compensation method, our aim at constructing electro-hydraulic test rig is not affected by various road disturbance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1586-1589
• /
• 2007

A prototype high-speed train system, Hanvit-350, has been developed in Korea since 1996. The train has reached the maximum speed of 352.4km/h during a test run on December 2004. It is presently undergoing various tests to stabilize its performance and to secure reliability. Until now, around 420 runs have been conducted and accumulates 190,000km trial run. The test database management program is developed using existing analysis program, LabVIEW and database program, Microsoft-SQL. The test database management program is used to analysis of test results and will be used to find out the correlation characteristics between parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.241-242
• /
• 2008

Korea Electric Power Research Institute has being carried out an IEC 61580 communication service test on IED trial products developed related to power IT project, "The verification of Performance of the Substation Automation System and Its Field Test". This paper presents reporting services of IEC 61850-8-1 and related UCA Test procedures, reporting test items are widely divided into unbuffered report and buffered report and this paper is dealing with unbuffered report.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.157-165
• /
• 2015

Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

• 산업기술연구
• /
• 제29권B호
• /
• pp.41-45
• /
• 2009

The new cooling fan for various parts & equipments of KTX is developed and evaluated to improve fan performance and durability. The characteristic curve of the developed fan is obtained according to KSB 6311 of performance test regulation. 70 degree of the installation angle of blade makes the fan to produce a maximum flow rate. This angle is found out through trial-error and is confirmed through the verification test. In order to improve the blade strength, the blade is produced by a draw forming. The adoption of AL50 reduces a fan weight by 6 kg. The new blade makes a static pressure 170 (mmAq), a discharge rate $140(m^3/min)$, a rotational speed 2886 (rpm) at the power 10 kw. which results 54% of the static pressure improvement relative to the original blade.

• Journal of applied mathematics & informatics
• /
• 제26권5_6호
• /
• pp.861-876
• /
• 2008

This paper concerns a new method called Fuzzy Supervised Method for error matrix, the method has developed based on Adoptive Neuro- Fuzzy Inference Systems(ANFIS). For the performance point of view initially the new method tested with trial data and then this paper applies the proposed method with real world problems. So that this paper generated 1000 random error matrices in programming language [R] and then it tests the new proposed method for the error matrices. The results of Fuzzy Supervised Method given in terms of Kappa Index and Congalton Accuracy Indexes, and performance of Fuzzy Supervised Method has evaluated by using Pearson's test.