• 제목/요약/키워드: Performance tests

검색결과 6,722건 처리시간 0.04초

공학교육에서 평가 횟수 증가와 학업 성취도 향상의 상관관계에 관한 사례연구 (A Case Study on the Improvement of Learning Performance by Increasing the Number of Tests in Engineering Education)

  • 백현덕;박진원
    • 공학교육연구
    • /
    • 제19권6호
    • /
    • pp.57-62
    • /
    • 2016
  • In this work, we present a case study of using the assessments for the enhancement of students' learning motivation in engineering education. The assessments, given in between summative assessments such as midterms and finals, may have a component of formative evaluation, which are reported as very effective tools as the sources of feedback to improve teaching and learning. We studied how the students' performance is improved by additional tests in engineering education. Also, we examined the factors of successful results of the cooperative learning model, Student Teams-Achievement Division, which is based on imposing a number of tests, achieved in our previous work.

교류 급전시스템 성능검증을 위한 시험방안에 관한 연구 (A Study on tests process for verification of AC Traction system performance)

  • 정호성;이기원;김주락;한문섭;김진희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.2202-2203
    • /
    • 2011
  • AC substation of urban transit supplies a suitable AC power on electricity vehicles. AC substation is verified electrical safety of system through pre-operation inspection on electrical installations to be supplied power from KEPCO. However, because test items and method for AC traction system are unprepared on pre-operation inspection, the general safety and performance verification of AC traction system are very insufficient. Therefore this paper analyze the test examples such as factory equipment tests, factory combined tests and railway tests for the safety and performance verification of AC traction system and present a suitable test items and test standard in domestic.

  • PDF

화물열차 차축용 저 마찰 오일실의 성능 평가 (Performance Evaluation of a Lubrication Seal for Freight Cars)

  • 김재훈;신공순;김준호;구병춘
    • 한국철도학회논문집
    • /
    • 제9권6호
    • /
    • pp.630-634
    • /
    • 2006
  • Rail car axles are very important parts for safety of passengers and structural integrity of vehicles. The axles are supported by bearings. To seal grease lubricating the bearings of freight cars, an oil seal has been developed. The developed oil seal is composed of an inner plate, an outer plate and a seal rubber. The friction between axle and housing with the developed oil seal is very low. The seals are designed for a minimum life expectancy of 800,000 kilometers service. In this study, an accelerated durability tests according to AAR Specification M-934-82 were carried out. In addition, various performance tests according to KS B 2804 were conducted.

직류 급전시스템 성능검증을 위한 시험방안 분석 (An analysis of tests process for verification of DC Traction system performance)

  • 정호성;한문섭;장동욱;이기원
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.499-504
    • /
    • 2008
  • DC substation of urban transit supplies a suitable DC power on electricity vehicles by being supplied from KEPCO. DC substation is verified electrical safety of system through pre-operation inspection on electrical installations to be supplied power from KEPCO. However, because test items and method for DC traction system are unprepared on pre-operation inspection, the general safety and performance verification of DC traction system are very insufficient. Therefore this paper analyze the overseas test examples such as factory equipment tests, factory combined tests and railway tests for the safety and performance verification of DC traction system and present a suitable test items and test standard in domestic.

  • PDF

Monte Carlo simulation for verification of nonparametric tests used in final status surveys of MARSSIM at decommissioning of nuclear facilities

  • Sohn, Wook;Hong, Eun-hee
    • Nuclear Engineering and Technology
    • /
    • 제53권5호
    • /
    • pp.1664-1675
    • /
    • 2021
  • In order to verify the statistical performance of the nonparametric tests used in the MARSSIM approach, all plausible contamination distribution types that can be encountered in a survey area should be investigated. As the first of such investigations, this study aims to perform the verification for normal distribution of the contamination in a survey area by simulating the collection of random samples from it through the Monte Carlo simulation. The results of the simulations conducted for a total of 81 simulation cases showed that Sign test and WRS test both exhibited an excellent statistical performance: 100% for the former and 98.8% for the latter. Therefore, in final status surveys of the MARSSIM approach, a high statistical performance can be expected in applying the nonparametric hypothesis tests to survey areas whose net contamination can be assumed to be normally distributed.

배수성 포장용 고점도 개질 아스팔트 바인더 개발 (Development of High Viscous Modified Asphalt Binder for Porous Asphalt Pavement)

  • 김형석;이현종;이광호;김형배
    • 한국도로학회논문집
    • /
    • 제12권2호
    • /
    • pp.81-90
    • /
    • 2010
  • 본 연구는 배수성 아스팔트 포장에 사용하기 위하여 국내에서 개발한 개질 아스팔트 바인더 및 혼합물의 실내 및 현장 공용성을 평가한 연구이다. 국내에서 개발된 개질 아스팔트 2종에 대한 DSR, BBR 및 다양한 바인더 시험을 실시하여 공용성능이 상대적으로 우수한 1종의 개질 아스팔트를 선정하였다. 선정된 개질 아스팔트와 기존에 일본에서 사용되는 개질 아스팔트를 사용하여 각각에 대하여 배합설계를 실시하고, 배수성 아스팔트 혼합물을 생산하여 실내 공용성을 비교하기 위해 휠트래킹 시험, 수분손상 시험, 피로시험 등을 수행하였다. 그 결과, 공용특성 측면에서 국산의 개질 아스팔트가 일본 개질 아스팔트와 비슷하거나 경우에 따라서는 우수함을 확인하였다. 실내시험결과를 바탕으로 현장 시험시공을 실시하였고, 추적조사를 통하여 시간에 따른 공극률과 소음특성의 변화를 측정하였다. 그 결과 시공 초기에는 배수 및 소음 저감 능력이 우수하였으나 2년이 경과한 후 소음 저감 능력이 감소하여 SMA 포장과 비슷한 수준의 소음저감효과를 나타내었다.

Hydrodynamic Performance of a 2,500-ton Class Trimaran

  • Kang, kuk-Jin;Lee, Chun-Ju;Kim, Sun-Young;Park, Yun-Rak;Lee, Jin-Tae
    • Journal of Ship and Ocean Technology
    • /
    • 제6권2호
    • /
    • pp.23-36
    • /
    • 2002
  • This paper describes the powering, seakeeping and maneuvering performances for a 2,500-ton class trimaran. Influence of the side-hull forms and location of those in longitudinal and transverse direction to resistance performance was systematically investigated by a series of model tests and numerical calculations. It was found that the longitudinal location of side-hulls was the most influential design parameter to the resistance performance of the trimaran and the optimum location of side-hull depends on ship speeds. When the side-hull stem is located near the primary wave hollow generated by the main hull, the trimaran shows the best resistance performance. Powering performance of the trimaran is superior to those of similar mono-hull ships. Seakeeping model tests for the trimaran were executed and the results were compared with the theoretical results of a similar mono-hull ship. Generally speaking, seakeeping performance of the trimaran is superior to that of a mono-hull ship. In particular, pitching and rolling performance of the trimaran is excellent, which is due to the increased length and breadth. Maneuvering model tests using a HPMM equipment were executed to evaluate the maneuvering performance of the trimaran. Maneuvering simulation was performed using the maneuvering coefficients from the model tests. The results show that the control ability of heading angle and the direction keeping stability of the trimaran is excellent, even though the turning performance is rather worse compared to those of a similar mono-hull ship.

Structural Performance Tests of Down Scaled Composite Wind Turbine Blade using Embedded Fiber Bragg Grating Sensors

  • Kim, Sang-Woo;Kim, Eun-Ho;Rim, Mi-Sun;Shrestha, Pratik;Lee, In;Kwon, Il-Bum
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제12권4호
    • /
    • pp.346-353
    • /
    • 2011
  • In this study, the structural performance tests, i.e., static tests and dynamic tests of the composite wind turbine blade, were carried out by using the embedded fiber Bragg grating (FBG) sensors. The composite wind turbine blade used in the test is the 1/23 scale of the 750 kW composite blade. In static tests, the deflections along the blade were evaluated. Evaluations were carried out with simple beam theory and quadratic fitting method by using the embedded FBG sensors to predict the structural behavior with respect to the load. The deflections were compared to those obtained from the laser displacement sensor and electric strain gauges. They showed good agreement. Modal tests were performed to investigate the dynamic characteristics using the embedded FBG sensors. The natural frequencies obtained from the FBG sensors corresponding to the nine mode shapes of the blade were compared to those from the laser Doppler vibrometer. They were found to be consistent with each other. Therefore, it is concluded that the embedded FBG sensors have a great capability for measuring the structural performances of the composite wind turbine blade when structural performance tests are carried out.

터보펌프용 연료펌프의 성능 시험 (Performance Tests of the Fuel Pump for a Turbopump)

  • 김대진;홍순삼;최창호;김진한
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.655-659
    • /
    • 2004
  • Performance tests of the fuel pump for a turbopump unit have been successfully carried out in water environment. The tests are performed to evaluate the hydraulic and cavitation performances. The head and volute pressure distribution of the fuel pump followed the conventional similarity rule - unlike this, the secondary passage pressure distribution showed a small deviation from the conventional similarity rule. Also, critical cavitation number decreased as the rotational speed of the pump increased.

  • PDF

Influence of design modification of control rod assembly for Prototype Generation IV Sodium-cooled Fast Reactor on drop performance

  • Son, Jin Gwan;Lee, Jae Han;Kim, Hoe Woong;Kim, Sung Kyun;Kim, Jong Bum
    • Nuclear Engineering and Technology
    • /
    • 제51권3호
    • /
    • pp.922-929
    • /
    • 2019
  • This paper presents the drop performance test of the control rod assembly which is one of the main components strongly related to the safety of the prototype generation IV sodium-cooled fast reactor. To investigate the drop performance, a real-sized control rod assembly that was recently modified based on the drop analysis results was newly fabricated, and several free drop tests under different flow rate conditions were carried out. Then the results were compared with those obtained from the previous tests conducted on the conceptually designed control rod assembly to demonstrate the improvement in performance. Moreover, the drop performance tests under several types and magnitudes of seismic loadings were also conducted to investigate the effect of the seismic loading on the drop performance of the modified control rod assembly. The results showed that the effects of the type and magnitude of the seismic loading on the drop performance of the modified control rod assembly were not significant. Also, the drop time requirement was successfully satisfied, even under the seismic loading conditions.