• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.372-376
• /
• 2004

In this paper, the standard test methods at low temperature of rubber suspension components of railway vehicle are investigated and reviewed. In order to connect the TKR(Trans-Korean Railway)-TSR(Trans-Siberian Railway), it is necessary to evaluate the performance of rubber suspenion components of railway vehicle. In the current Korean Standard, the test method at low temperature of railway vehilce components and the test method of rubber bellows of air spring are specified. But, the specified test temperature is higher than the the operating temperature of TSR railway. So, the in-depth research for the test method and performance evaluation technique of rubber suspension component at low temperature is necessary and current KS code should be adjusted.

• Mass Spectrometry Letters
• /
• 제9권3호
• /
• pp.77-80
• /
• 2018

The focus of this paper is to present techniques to overcome certain difficulties in quantitative analysis with a time-of-flight mass spectrometer (TOF-MS). The method is based on conventional solid-phase extraction, followed by reversed-phase ultra high performance liquid chromatography of the extract, and mass spectrometric analysis. The target compounds included atenolol, atrazine, caffeine, carbamazepine, diclofenac, estrone, ibuprofen, naproxen, simazine, sucralose, sulfamethoxazole, and triclosan. The matrix effects caused by high concentrations of organic compounds in wastewater are especially significant in electrospray ionization mass spectroscopy. Internal-standard calibration with isotopically labeled standards corrects the results for many matrix effects, but some peculiarities were observed. The problems encountered in quantitation of carbamazepine and triclosan, due to nonlinear calibration were solved by changing the internal standard and using a narrower mass window. With simazine, the use of a quadratic calibration curve was the best solution.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.18-26
• /
• 2012

Recently, there have been suggestions that power factor should be considered to increase the efficiency of electric power supply when evaluating the performance of the electric appliances in standby mode and the related studies have been conducted to improve the efficiency standard of standby power. But, they lack the analysis of the standby power characteristics with the changes of power factor. This study is conducted to analyze the standby power characteristics of TV which is a typical home appliance and reaches a conclusion that the apparent power can be a more reasonable index which reflects the efficiency of electric power supply. It is also found that LED TVs show the best performance in standby mode. Moreover, an example to set standby power standards on TVs to be applied in the future is suggested, considering the energy efficiency policies for appliances.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.101-104
• /
• 1995

In this paper, we designed a cascade adaptive filter for elimination of the baseline drift and the distortion of the filtered signal. The cascade adaptive filter(CAF) consists of two filters. The first adaptive filter which has the cutoff frequency of 0.3Hz eliminate the noisy signal. The second adaptive filter remove the remnant baseline drift which is not eliminated by the first adaptive filter. Comparing the performance of the CAF with standard filter, recursive notch filter(RNF) and a adaptive impulse correlated filter(AICF), the CAF showed a higher performance in removal of the baseline drift than standard filler, and RNF. Also, considering the distortion of filtered signal, CAF is better than AICF and is comparable to the standard filter.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.27-33
• /
• 2020

In this paper, the process of predicting efficient durability performance for vibration durability test of automobile parts using vibration test load on automobile fuel tank is presented. First of all, the common standard load that can be applied to the initial development process of the automobile was used for the fuel tank and the vulnerability of the fuel tank to the vibration fatigue load was identified through frequency response analysis. In addition, the vulnerability of the fuel tank was re-enacted through vibration durability test results, and the scale factor was applied to the standard load. In order to predict the vibration durability performance required for detailed design, vibration fatigue analysis was performed on the developed vehicle with the frequency of vibration severity equivalent to the durability test, and the vulnerability and life span of the fuel tank were identified through the process of applying weights to these selected standard loads, thereby reducing the test time of the development vehicle.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.97-100
• /
• 1999

Mobile network applications are growing and this requires a fast and efficient transport method between the BS(Base Station) and the MSC(Mobile Switching Center). One possible solution is to use ATM and a voice CODEC standard which compresses 64kbps voice data to less than 8kbps. The low bit tate and small-sized packets made by the voice CODEC imply that significant amount of link bandwidth would be wasted, if this small-sized packet is carried by one ATM cell. The cell assembly delay increases if one ATM cell is fully filled with the small-sized packets. For the bandwidth-efficient transmission of low-rate, short, and variable length packets in delay sensitive applications, AAL-2 was standardized. This paper evaluates performance of AAL-2 by using voice CODEC standard.

• 전기학회논문지P
• /
• 제60권1호
• /
• pp.37-44
• /
• 2011

HSPA(High Speed Packet Access)/HSPA+ is a combined 3GPP(Third Generation Partnership Project) standard of HSDPA(High Speed Downlink Packet Access) and HSUPA(High Speed Uplink Packet Access). The standard can provide the high speed multimedia service against the 3GPP release 99 standard. In order to test the 3GPP HSPA/HSPA+ terminal performance, the measurement hardware is required for the evaluate the transmitted signal of HSPA/HSPA+ terminals. Agilent Technologies and Innowireless produce the measurement equipments for HSPA/HSPA+ terminals. Generally speaking, the receiving algorithms in normal modems cannot be used directly to the measurement system due to the lack of the algorithm accuracy. In this paper, we propose the new receiver algorithm for precise measurement of 3GPP HSPA/HSPA+ terminal signal, and implement measurement functionality for performance measurement of the 3GPP HSPA/HSPA+ terminal by using software. The proposed 3GPP HSPA/HSPA+ signal measurement algorithm can be used for the commercial system through code execution speed optimization.

• 한국대기환경학회지
• /
• 제26권4호
• /
• pp.449-452
• /
• 2010

In this article, the performance of the THC analyzer was inspected using two different span gases of methane ($CH_4$) and propane ($C_3H_8$). To explore the effect of standard gas selection, MicroFID system was tested by the following procedures. Initially, the system is spanned by propane gas of 60 ppm (or 180 ppmC). The system is then run against methane standards prepared at 5 different concentrations of 200, 250, 300, 400, and 500 ppm. According to the suggestion of the KMOE's test procedure to use multiplying a factor of 3 (for propane), the resulting THC values derived by methane standards were systematically biased with ~500% error relative to true value. This paper discusses the interpretation procedures to obtain the least biased THC values for a given span set-up.

• 한국시뮬레이션학회논문지
• /
• 제9권2호
• /
• pp.15-25
• /
• 2000

Since data security problems are very important in the information age, cryptographic algorithms for encryption and decryption have been studied for a long time. The GOST(Gosudarstvennyi Standard or Government Standard) algorithm as a data encryption algorithm with a 256-bit key is a 64-bit block algorithm developed in the former Soviet Union. In this paper, we describe how to design an encryption chip based on the GOST algorithm. In addition, the GOST algorithm is compared with the DES(Data Encryption Standard) algorithm, which has been used as a conventional data encryption algorithm, in modeling techniques and their performance. The GOST algorithm whose key size is relatively longer than that of the DES algorithm has been expanded to get better performance, modeled in VHDL, and simulated for implementation with an CPLD chip.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.117-126
• /
• 2005

Korean Standard Certificate, suitable for the korean industrial standards is one which was designed not only to spread and utilize the industrial standard established for the industrial standardization, but to protect the consumer. In this study, the practical effects of the Korean Standard Certificate will be examined in various fields, based on the small medium enterprises which achieved the KS Certificate. In order to look into how the system has effects on the performance of the management in a company, the method of the actual approach will be used. In the end, the purpose of this study is to find the plan in which KS Certificate can be helpful to the development of the company.