• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1292-1295
• /
• 1996

This paper proposes an adaptive control technique for the autopilot design of STT missile. Dynamics of the missile is highly nonlinear and the equilibrium point is vulnerable to change due to fast maneuvering. Therefore nonlinear control techniques are desirable for the autopilot design of the missile. The nonlinear controller requires the exact model to obtain satisfactory performance. Generally a look-up table is used for the dynamic coefficients of a missile, so there must be coefficients error during actual flight, and the performance of the nonlinear controller using these data can be degraded. The proposed adaptive control technique compensates the nonlinear controller with modeling error resulting from the error of aerodynamic data and disturbance. To investigate the usefulness, the proposed method is applied to autopilot design of STT missile through simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4E
• /
• pp.28-36
• /
• 1996

In this paper, we propose a new evaluation methodology which can more clearly show the performance of the allophone modeling algorithm generally used in large vocabulary speech recognition. The proposed evaluation method shows the running characteristics and limitations of the modeling algorithm by testing how the variation of phonetic environments of training data affects the recognition performance and the desirable number of free parameters to be estimated. Using the method, we experiment results, we conclude that, in vocabulary-independent recognition task, the phonetic diversity of training data greatly affects the robustness of model, and it is necessary to develop a proper measure which can determine the number of states compromizing the robustness and the precision of the HMnet better than the conventional modeling efficiency.

• Journal of Computing Science and Engineering
• /
• v.5 no.1
• /
• pp.85-110
• /
• 2011

Achieving situation awareness is especially challenging for real-time data stream applications because they i) operate on continuous unbounded streams of data, and ii) have inherent realtime requirements. In this paper we showed how formal data stream modeling and analysis can be used to better understand stream behavior, evaluate query costs, and improve application performance. We used MEDAL, a formal specification language based on Petri nets, to model the data stream queries and the quality-of-service management mechanisms of RT-STREAM, a prototype system for data stream management. MEDAL's ability to combine query logic and data admission control in one model allows us to design a single comprehensive model of the system. This model can be used to perform a large set of analyses to help improve the application's performance and quality of service.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.137-137
• /
• 2000

In this research. we developed Tire Roller Prototype which is operated hydraulic transmission system. For develop the theoretically computer aided system, we practiced the simulation of hydraulic system and dynamic modeling and will compare with the experiment results of Tire Roller Prototype. We conceptualize the new hydraulic system and derive the equations of motion for dynamic analysis. Finally, we will design the controller, which can manage the hydraulic circuit of servo mechanism system. We define new hydraulic system and integrate modeling of Tire Roller through simulation of h\ulcornerdraulic system and design of controller. From above procedure. Hydraulic transmission system characteristics and target performance can be investigated. To follow the required performance, we select the parts of Tire Roller. We manufactured the prototype of Tire Roller, and will install the equipment for experiment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1784-1792
• /
• 2001

Numerical analysis on a parallel flow heat exchanger(PFHE) is performed using 2 dimensional turbulent porous modeling. This modeling can consider three-dimensional configuration of passage (flat tube with micro-channels), and the stability and accuracy of numerical results are improved. The geometrical parameters(e.g., the position of separators, inlet/outlet, and porosity of passages of a PFHE) are varied in order to examine the flow and thermal characteristics and flow distribution of the single phase multiple passages system. The flow non-uniformities along the paths of the PFHE are observed to evaluate the thermal performance of the heat exchanger. The location of inlet affects the heat transfer, and the location of outlet affects the pressure drop. The porosity with the optimum thermal performance is around 0.53.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.482-489
• /
• 2006

This paper presents the generalized dynamic modeling of self-excited induction generator (SEIG) using state-space approach. The proposed dynamic model consists of induction generator; self-excitation capacitance and load model are expressed in stationary d-q reference frame with the actual saturation curve of the machine. An artificial neural network model is implemented to estimate the machine magnetizing inductance based on the knowledge of magnetizing current. The dynamic performance of SEIG is investigated under no load, with the load, perturbation of load, short circuit at stator terminals, and variation of prime mover speed, variation of capacitance value by considering the effect of main and cross-flux saturation. During voltage buildup the variation in magnetizing inductance is taken into consideration. The performance of SEIG system under various conditions as mentioned above is simulated using MATLAB/SIMULINK and the simulation results demonstrates the feasibility of the proposed system.

• Journal of the Korean Society for Railway
• /
• v.10 no.4
• /
• pp.431-437
• /
• 2007

This paper describes the dynamic modeling of a railway vehicle when it is under braking force. It is important for the enhancement of braking performance to establish a proper dynamic model of a railway vehicle because the braking performance is affected by some dynamic forces generated by a railway vehicle when it undergoes braking. In this paper, a dynamic model for one vehicle is suggested to compute the dynamic behavior of a railway vehicle in the HILS(Hardware In-the-loop Simulation) system for the railway vehicle braking devices. To simplify the dynamic model, friction between a wheel and a rail is assumed that there exist only the static and the dynamic friction forces. Static friction coefficient is also assumed to be a function of the running speed. Some simulations are carried out with various braking forces, and the braking characteristics according to the change of the braking force are discussed. This study can provide some fundamental results to construct the HILS system for braking devices of a railway vehicle.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.1
• /
• pp.20-27
• /
• 2013

Numerical modeling of $CO_2$ water heater was conducted prior to optimal design of medium and large sized $CO_2$ water heater, and the experimental test with small sized $CO_2$ water heater having heat capacity of 4 kW was completed to verify the present numerical model. The present model estimated the experimental data of COP(coefficient of performance), heating capacity, and the hot water outlet temperature within the range of 3% to 8% of mean deviation. As increase of EEV(electric expansion valve) opening area, decreasing of heating capacity and the hot water outlet temperature, and increasing of COP were found in both experimental and numerical investigation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.119-127
• /
• 2011

The paper surveys various analytical models for IEEE 802.11 medium access control protocols and critically discusses recent issues developing in wireless mobile ad hoc networks and their MACs. The surveyed MAC protocols include the standard IEEE 802.11 MAC suites such as IEEE 802.11 DCF, IEEE 802.11 PCF, IEEE 802.11e EDCA, and IEEE 802.11 ad hoc mode; and also the newer, de facto MAC protocols. We study the analytic models of the standard MAC suites followed by the newer analytic models that have been published in recent years. Also, the paper tries to include most of current literatures discussing analytic modeling of MAC in conjunction to some critical issues such as contention among ad hoc nodes, hidden terminal problems, and real-time service support.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.568-573
• /
• 1996

In this paper, A design strategy of the Surface Mounting Device for accurate and better performance is studied. Analytical Modeling. Sensitivity analysis and optimization are being conducted. The ANSYS software and experimental method are used for verification of the analytical equations withboundary conditons. Through the sensitivity analysis, the most dominant design parameters can be detected. The optimum design parameters for performing given performing given perfomances are selected by using the optimization algorithm. The design tool based on the design strategy for the analysis, modeling and optimization will be useful for a re-design and better perofrmance of the SMD.