• Journal of Institute of Control, Robotics and Systems
• /
• 제8권4호
• /
• pp.288-291
• /
• 2002

We characterize multipath fading channel dynamics at the packet level and analyze the corresponding data queueing performance in various environments. We identify the similarity between wire-line queueing analysis and wireless network per-formance analysis. The second order channel statistics, i.e. channel power spectrum, is fecund to play an important role in the modeling of multipath fading channels. However, it is identified that the first order statistics, i.e. channel CDF also has significant impact on queueing performance. We use a special Markov chain, so-called CMPP, throughout this paper.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제37권4호
• /
• pp.17-24
• /
• 2000

To use the power line as the communication channel, we have analyzed channel characteristics with the noise data and signal attenuation levels measured on power lines per loom. In this paper, channel capacities are calculated in the best or the worst case noise states and signal attenuations on power lines for three kinds of network-topologies. Analyzed the channel capacity by the best and worst conditions, we concluded that the serious factors influenceing on the channel capacity are the length from a transmitter to a receiver and the network topology.

• The Korean Journal of Physiology
• /
• 제29권1호
• /
• pp.13-27
• /
• 1995

single $K^{+}$ channels of skeletal muscle from the rat and frog were into planar lipid bilayers and their properties were studied. Fusion was induced by an osmotic gradient. Of the four types of $K^{+}$ channels recorded, the two most frequently observed were a voltage and $Ca^{2+}-activated$ $K^{+}$ channel and a $K^{+}$ channel with a prominent conductance substate. The first $K^{+}$ channel was identified as the large $Ca^{2+}-activated$ $K^{+}$ (BK) channel because the open-state probability was increased with depolarization (e-fold change per $10.6{\pm}3.5$ mV, n=8) and internal $Ca^{2+}$ (half-activation at $16.7{\pm}3.8$ mV, n=8, pCa 4) and its conductance was large ($247{\pm}4.9$ pS, n=24 in 0.1 M KCI). Lifetime distributions of open- and closed-states could be fitted with single exponentials of several milliseconds. The mean open- and closed-lifetimes were linearly dependent on the intracellular $[Ca^{2+}]$ and $1/[Ca^{2+}]$, respectively. The second $K^{+}$ channel showed a conductance substate at $30{\sim}60%$ of the open state. Its current-voltage relation was linear in the range of $-80\;{\sim}\;+80\;mV$. The slope conductance of the substate and open-state were 40 and 144 pS in 0.2 M KCl, respectively. The channel was highly selective for $K^{+}$ over Cl. The open-state probability was weakly voltage-dependent (e-fold change per 35 mV. The lifetime distributions of open- and closed-states were fitted with two exponentials and the major gating occurred slowly at several hundred milliseconds. Based on the above results, we think the second type of $K^{+}$ channel is the sarcoplasmic reticulum $K^{+}$ (SRK) channel. In addition, both types of channel were also incorporated into the lipids extracted from the skeletal muscle. The channel properties recorded in the bilayers termed from synthetic and extracted lipids were qualitatively similar. Our data indicate that BK and SRK channels are rich in the skeletal muscle and their properties and regulation could be effectively studied in planar lipid bilayer.

• Journal of Communications and Networks
• /
• 제7권3호
• /
• pp.284-293
• /
• 2005

A critical issue in applications involving networks of wireless sensors is their ability to synchronize, and mitigate the fading propagation channel effects. Especially when distributed 'slave' sensors (nodes) reach-back to communicate with the 'master' sensor (gateway), low power cooperative schemes are well motivated. Viewing each node as an antenna element in a multi-input multi-output (MIMO) multi-antenna system, we design pilot patterns to estimate the multiple carrier frequency offsets (CFO), and the multiple channels corresponding to each node-gateway link. Our novel pilot scheme consists of non-zero pilot symbols along with zeros, which separate nodes in a time division multiple access (TDMA) fashion, and lead to low complexity schemes because CFO and channel estimators per node are decoupled. The resulting training algorithm is not only suitable for wireless sensor networks, but also for synchronization and channel estimation of single- and multi-carrier MIMO systems. We investigate the performance of our estimators analytically, and with simulations.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• 제32B권12호
• /
• pp.1565-1571
• /
• 1995

Misalignment of recording head position results in inter-track interference (ITI), which is a primary factor limiting radial(track) density in current digital magnetic channels. This paper proposes a multi- channel adaptive PRML for digital high-density recording channels, and compares it with the conventional single-channel PRML in the presence of ITI for the per- formance evaluation. Simulation results show that the proposed method removes ITI effectively when heal-misalignment occurs, then improving its performance significantly as compared with the single- channel PRML. As a result, it is confirmed that multi-channel adaptive PRML is well suited for high-density recording in digital magnetic channels.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.65-67
• /
• 2004

Change of state of Channel between two wireless terminals which is caused by noise and multiple environmental conditions for happens frequently from the Wireles Network. So, When it is like that planning a wireless network protocol or performance analysis, it follows to change of state of time-varying channel and packet the analysis against a transmission efficiency is necessary. In this paper, analyzes transmission time of a packet and a packet in a time-varying and packet based Wireless Network. To reflecte the feature of the time-varying channel, we use a Signal Flow Graph model. From the model the mean of transmission time and the mean of queue length of the packet are analyzed in terms of the packet distribution function, the packet transmission service time, and the PER of the time-varying channel.

• Journal of Korea Multimedia Society
• /
• 제10권12호
• /
• pp.1632-1644
• /
• 2007

Wireless Mesh Networks aim to attain large connectivity with minimum performance degradation, as network size is increase. As such, scalability is one of the main characteristics of Wireless Mesh Networks that differentiates it from other wireless networks. This characteristic creates the need for bandwidth efficiency strategies to ensure that network performance does not degrade as the size of the network increase. Several researches have been done to realize mesh networks. However, the researches conducted were mostly focused on a per TCP/IP layer basis. Also, the studies on bandwidth efficiency and bandwidth improvement are usually dealt with as separate issues. This paper aims to simultaneously study bandwidth efficiency and improvement. Aside from optimizing the bandwidth given a fixed capacity, the capacity is also increased using results of physical layer studies. In this paper, the capacity is improved by using the concept of non-overlapping channels for wireless communication. A channel allocation scheme is conceptualized to choose the transmission channel that would optimize the network performance parameters with consideration of chosen Quality of Service (QoS) parameters. Network utility maximization is used to optimize the bandwidth after channel selection. Furthermore, a routing scheme is proposed using the results of the network utilization method and the channel allocation scheme to find the optimal path that would maximize the network gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제25권10A호
• /
• pp.1529-1539
• /
• 2000

The contact procedure of access channel necessary to set up the originating call has a close relation with the performance and capacity of the base station system in CDMA cellular network. This paper investigates the structure and the operation of the backward channel of IS-95 CDMA standard and explains the related system parameters. We can derive the throughput of the CDMA access channel depending on the arrivals of the access probes per access channel slot, given the system parameters such as cell radius, the maximum number of retransmission, and the error rates of the access and paging channel. It shows that the performance in throughput is much better in the CDMA IS-95 access channel than in the slotted aloha channel. It also gives the reasonable number of the trafic channels in a cell with the given blocking probability.

• Journal of Distribution Science
• /
• 제13권5호
• /
• pp.91-102
• /
• 2015

Purpose - This study aims to build a systematic frame for effective marketing performances by prioritizing product type and pertinent channel that are appropriate for digital channel characteristics. FCB grid model was used to define a product type, and Internet communication satisfaction index was considered as a marketing performance measuring tool for digital channel. Research design, data, and methodology - As systematic understanding for Digital marketing is still unfamiliar to even professional marketer, the hypothesis was established based on preliminary research by conducting a qualitative survey of marketing experts who already experienced digital marketing in the fields as well as existing related study literature. Through a preliminary research, the degree for understanding for digital marketing, current digital marketing (including product/channel mix) execution status, and difficulties for marketers who had experienced digital marketing were figured out. Based on preliminary research, the main part of survey was designed to examine which type of product would be effective for digital marketing and which digital channel would be effective to achieve marketing performance in line with marketing objectives. To collect data, the questionnaire survey was conducted for professional marketers who had experienced digital marketing in 10 different fields including FMCG, cosmetics, distribution industry for one month (July, 10, 2014~Aug, 10, 2014). A total of 90 questionnaire were distributed and 66 questionnaires were used for the analysis, excluding the unanswered and insincere questionnaires. The data were analysed using SPSS ver.18.0. Results - The analysis for product type which is pertinent to digital marketing and prioritization for digital channel per digital marketing performance type could be summarized as followings. First, high involvement buying decision type of product and rational purchasing decision type of product in FCB grid are more effective for digital marketing in terms of marketing performance. Therefore, marketers in field would prioritize considering product type before executing digital marketing. Second, factor for sales increase, potential consumer creation and brand awareness was represented respectively 31.25%, 21.9%, and 20.8% as a result of factor analysis in terms of digital marketing channel performance. Third, effective major digital channel per digital marketing performance factor was differently identified as each digital channel has its own peculiarity. For instance, search engine is more effective for increasing sales while social media such as facebook and Kakaotalk is more effective for encouraging consumer participation. Conclusions - As a result of this study, product type and peculiarity which were pertinently fit to digital marketing were identified by using FCB grid model, and also suggested framework for decision making of digital channel selection in line with marketing objectives for effective marketing performance. It also provided insight to professional marketer which type of product could be effective for digital marketing execution as well as which factors should be measured for digital marketing performance.

• Journal of Advanced Navigation Technology
• /
• 제6권2호
• /
• pp.151-157
• /
• 2002

This paper has investigated the PER performance and the packet throughput of Bluetooth multi-piconet in the presence of impulsive noise, Rician fading, and co-channel interference. Specially, it is simulated the effect of co-channel interference in Bluetooth multi-piconet. From the simulation results, it is obtained that the co-channel interference due to multi-piconet and impulsive noise affects performance of Bluetooth multi-piconet. And, we have known that the SAW-ARQ method is very efficient to improve the performance of Bluetooth packet transmission.