• Smart Structures and Systems
• /
• 제18권2호
• /
• pp.197-216
• /
• 2016

The increased speed of a train causes increased loads that act on the track substructures. To ensure the safety of the track substructures, proper maintenance and repair are necessary based on an accurate characterization of strength and stiffness. The objective of this study is to develop and apply a cone penetrometer incorporated with the dynamic cone penetration method (CPD) for investigating track substructures. The CPD consists of an outer rod for dynamic penetration in the ballast layer and an inner rod with load cells for static penetration in the subgrade. Additionally, an energy-monitoring module composed of strain gauges and an accelerometer is connected to the head of the outer rod to measure the dynamic responses during the dynamic penetration. Moreover, eight strain gauges are installed in the load cells for static penetration to measure the cone tip resistance and the friction resistance during static penetration. To investigate the applicability of the developed CPD, laboratory and field tests are performed. The results of the CPD tests, i.e., profiles of the corrected dynamic cone penetration index (CDI), profiles of the cone tip and friction resistances, and the friction ratio are obtained at high resolution. Moreover, the maximum shear modulus of the subgrade is estimated using the relationships between the static penetration resistances and the maximum shear modulus obtained from the laboratory tests. This study suggests that the CPD test may be a useful method for the characterization of track substructures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1083-1086
• /
• 2008

In this study, Estimate solutions of ultimate lateral resistances for lateral loaded piles are proposed using cone penetration values, $q_c$ values, as CPT results. Cone penetration values, $q_c$ values measured on clean sand layers, are represented by factors for relative densities, axial stresses, and lateral stresses which are important on analysis of sandy soil layers. Also, these factors are same factors to consider existed estimations of ultimate lateral capacity. In this study, estimation of ultimate lateral capacity for lateral loaded piles using CPT results is proposed, and this estimation is verified by adequate analysis for effective reliability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1378-1381
• /
• 2003

Recently, high-performance composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured fiber reinforced metal laminate materials are composed of two parts. One is hard-anodized A15083-O alloy as a face material and the other is high strength aramid fiber (Twaron CT709) and polyethylene fiber(Dyneema HB25) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit(V$\sub$50/, a static velocity with 50% probability for complete penetration) test method. V$\sub$50/ tests with 0$^{\circ}$ obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.

• 한국지반공학회지:지반
• /
• 제14권1호
• /
• pp.71-80
• /
• 1998

서해안에 위치한 서산지역에서 연구용 prestressed concrete 말뚝을 3본을 설치하고 주변에서 콘관입시험을 수행하여 말뚝의 주면마찰력을 추정하는 연구를 수행했다. 본 연구에서 이용한 말뚝 지지력 산정식은 세계적으로 많이 이용하고 있는 Schmertmann방법, Tumay & Fakroo방법 및 프랑스의 LCPC방법을 이용하였다. 콘관입시험의 측정결과를 이용하여 3가지 방법으로 예측한 말뚝 의 주면마찰력과 현장에서 수행한 정역학적 재하시험 및 동재하시험에서 산정된 주면마찰력과의 비교하여 3가지 예측방법들에 대한 신뢰성을 평가했다. CPT를 이용한 3가지 예측식으로 산정한 말뚝의 주면마찰력은 전체적으로 25일과 42일이 지난후 수행한 정재하시험에 의한 주면마찰력을 상당히 과소평가했으나, 항타시좌 말뚝설치후 2주가 지난 시점에 수행한 동재하시험결과와는 유사한 말뚝의 주면마찰력을 예측했다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.527-532
• /
• 2000

The armor composite material targets such as aramid FRMLs with different type and ply number of face material and different type of back-up material, were studied to determine ballistic impact resistance and dynamic failure behavior during ballistic impact. Ballistic impact resistance is determined by $\textrm{V}_{50}$ ballistic limit, a statical velocity with 50% probability for complete penetration, test method. Also dynamic failure behaviors are respectfully observed that result from $\textrm{V}_{50}$ tests. $\textrm{V}_{50}$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during high velocity impact tests. As a result, ballistic impact resistance of anodized Al 5052-H34 alloy(2 ply) is better than that of anodized Al 5052-H34 alloy(1 ply), but Titanium alloy showed the similar ballistic impact resistance. In the face material, ballistic impact resistance of titanium alloy is better than that of anodized Al 5052-H34 alloy. In the back-up material, ballistic impact resistance of T750 type aramid fiber is better than that of CT709 type aramid fiber.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.47-52
• /
• 2008

겨울철 도로의 결빙을 방지하기 위하여 염화물계 제설제가 많이 사용되고 있으며, 매년 사용량이 증가하고 있다. 이러한 제설제의 사용은 구조물의 부착강도 저하, 표면스케일링, 환경오염을 발생시킨다. 본 연구에서는 17년간 사용해 온 콘크리트 도로 시설물의 피해상황에 대하여 현장조사를 실시하였으며, 기존 제설제와 개발된 친환경 제설제의 부식 저항성에 대한 비교 실내실험을 수행하였다. 현장피해 조사결과에 따르면, 제한 염화물량의 침투 깊이는 평균 40 mm정도로 나타났고, 조사구간의 표면 염화물 농도는 $3.45kg/m^3$으로 조사되었으며, 이에 비해 탄산화 깊이는 매우 적었다. 한편, 친환경 제설제의 경우, 기존 염화물계 제설제에 비해 염화물 침투 깊이가 적었으며, 부식저항성도 높은 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.119-131
• /
• 2014

본 연구에서는 광역 부지나 현장 접근성이 용이하지 않은 현장의 지반조사를 신속 정확하게 수행하기 위한 목적으로 해외에서 널리 사용되고 있는 동적 콘 관입시험기를 개선한 개량형 동적 콘 관입시험기를 개발하였다. 기존의 동적 콘 관입시험기의 장점인 휴대성, 간단한 시험방법 등은 그대로 반영하는 한편, 하부 로트의 결합 연장을 통하여 기존 시험기의 지반 관입심도 1m에서 6m까지 관입되도록 고안하였다. 또한, 해머(2+3+3kg), 콘(3type) 등의 조합으로 독일식/일본식 간이 동적 콘 관입시험기(Tsukuba, PWRI, SH type)와 동일한 제원으로 시험이 가능하며, 심도가 깊어짐에 따라 시험 결과에 영향을 미치는 수직도를 확보할 수 있도록 보조 장치를 적용시켰다. 이렇게 개발 제작한 개량형 동적 콘 관입시험기의 적용성을 평가하기 위하여 국내/외 현장의 다양한 지반에 대하여 시험을 수행하여 그 신뢰성을 확보하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.174-179
• /
• 2001

In order to investigate the fracture behaviors(perforation modes) and resistance to perforation during ballistic impact of aluminum alloy plate, ballistic tests were conducted. Depth of penetration experiments with 5.56mm-diameter ball projectile launched into 25mm-thickness Al 5052-H34 targets were conducted. A powder gun launched the 3.55g projectiles at striking velocities between 0.6 and 1.0 km/s. radiography of the damaged targets showed different penetration modes as striking velocities increased. Resistance to perforation is determined by the protection ballistic limit($V_{50}$), a statistical velocity with 50% probability for complete perforation. Fracture behaviors and ballistic tolerance, described by perforation modes, are respectfully observed at and above ballistic limit velocities, as a result of $V_{50}$ test and Projectile Through Plates (PTP) test methods. PTP tests were conducted with $0^{\circ}$ obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete perforation during PTP tests. The effect of various impact velocity are studied with depth of penetration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.257-260
• /
• 2004

The durability and water - resisting capability of nuclear concrete structures can be greatly improved as the density of concrete surface increases. Applying the surface penetration sealer to the concrete surface can increase the surface density. Therefore, the objective of this study is to identify the most suitable surface penetration sealer based on lab test. The considered parameters rate and water resistance and absorbance rate of the concrete specimen after the penetration sealer are applied. The experimental study resulted in the identification of the two most suitable surface penetration sealer based on their performance.

• International Journal of Concrete Structures and Materials
• /
• 제9권2호
• /
• pp.241-254
• /
• 2015

A lot of reinforced concrete (RC) structures in Syria went out of service after a few years of construction. This was mainly due to reinforcement corrosion or chemical attack on concrete. The use of blended cements is growing rapidly in the construction industry due to economical, ecological and technical benefits. Syria is relatively rich in scoria. In the study, mortar/concrete specimens were produced with seven types of cement: one plain Portland cement (control) and six blended cements with replacement levels ranging from 10 to 35 %. Rapid chloride penetration test was carried in accordance with ASTM C 1202 after two curing times of 28 and 90 days. The effect on the resistance of concrete against damage caused by corrosion of the embedded steel has been investigated using an accelerated corrosion test by impressing a constant anodic potential. The variation of current with time and time to failure of RC specimens were determined at 28 and 90 days curing. In addition, effects of aggressive acidic environments on mortars were investigated through 100 days of exposure to 5 % $H_2SO_4$, 10 % HCl, 5 % $HNO_3$ and 10 % $CH_3COOH$ solutions. Evaluation of sulfate resistance of mortars was also performed by immersing in 5 % $Na_2SO_4$ solution for 52 weeks. Test results reveal that the resistance to chloride penetration of concrete improves substantially with the increase of replacement level, and the concretes containing scoria based-blended cements, especially CEM II/B-P, exhibited corrosion initiation periods several times longer than the control mix. Further, an increase in scoria addition improves the acid resistance of mortar, especially in the early days of exposure, whereas after a long period of continuous exposure all specimens show the same behavior against the acid attack. According to results of sulfate resistance, CEM II/B-P can be used instead of SRPC in sulfate-bearing environments.