Browse > Article
http://dx.doi.org/10.1007/s40069-015-0101-z

Effect of Adding Scoria as Cement Replacement on Durability-Related Properties  

al-Swaidani, Aref Mohamad (Faculty of Architectural Engineering, Arab International University (AIU))
Aliyan, Samira Dib (Syrian Arab Organization for Standardization and Metrology (SASMO))
Publication Information
International Journal of Concrete Structures and Materials / v.9, no.2, 2015 , pp. 241-254 More about this Journal
Abstract
A lot of reinforced concrete (RC) structures in Syria went out of service after a few years of construction. This was mainly due to reinforcement corrosion or chemical attack on concrete. The use of blended cements is growing rapidly in the construction industry due to economical, ecological and technical benefits. Syria is relatively rich in scoria. In the study, mortar/concrete specimens were produced with seven types of cement: one plain Portland cement (control) and six blended cements with replacement levels ranging from 10 to 35 %. Rapid chloride penetration test was carried in accordance with ASTM C 1202 after two curing times of 28 and 90 days. The effect on the resistance of concrete against damage caused by corrosion of the embedded steel has been investigated using an accelerated corrosion test by impressing a constant anodic potential. The variation of current with time and time to failure of RC specimens were determined at 28 and 90 days curing. In addition, effects of aggressive acidic environments on mortars were investigated through 100 days of exposure to 5 % $H_2SO_4$, 10 % HCl, 5 % $HNO_3$ and 10 % $CH_3COOH$ solutions. Evaluation of sulfate resistance of mortars was also performed by immersing in 5 % $Na_2SO_4$ solution for 52 weeks. Test results reveal that the resistance to chloride penetration of concrete improves substantially with the increase of replacement level, and the concretes containing scoria based-blended cements, especially CEM II/B-P, exhibited corrosion initiation periods several times longer than the control mix. Further, an increase in scoria addition improves the acid resistance of mortar, especially in the early days of exposure, whereas after a long period of continuous exposure all specimens show the same behavior against the acid attack. According to results of sulfate resistance, CEM II/B-P can be used instead of SRPC in sulfate-bearing environments.
Keywords
durability; corrosion resistance; blended cement; natural pozzolans; acid attack; scoria; sulfate attack;
Citations & Related Records
연도 인용수 순위
  • Reference
1 EN 197-1 (2004). Cement: part 1. Composition, specification and conformity criteria for common cements. Brussels, Belgium: European Committee for Standardization.
2 Fattuhi, N. I., & Hughes, B. P. (1988). SRPC and modified concretes subjected to severe sulphuric acid attack. Magazine of Concrete Research, 40, 159-166.   DOI
3 Gastaldini, A. L. G., Isaia, G. C., Gomes, N. S., & Sperb, J. E. K. (2007). Chloride penetration and carbonation in concrete with rice husk ash and chemical activators. Cement & Concrete Composites, 21, 356-361.
4 Ghrici, M., Kenai, S., & Meziane, E. (2006). Mechanical and durability properties of cement mortar with Algerian natural pozzolana. Journal of Material Science, 41, 6965-6972.   DOI
5 Gonzalez, M. A., & Irassar, E. F. (1997). Ettringite formation in low C3A Portland cement exposed to sodium sulfate solution. Cement and Concrete Research, 27(7), 1061-1072.   DOI
6 Guneyisi, E., Ozturan, T., & Gesoglu, M. (2005). A study on reinforcement corrosion and related properties of plain and blended cement concretes under different curing conditions. Cement & Concrete Composites, 27, 449-461.   DOI
7 Ha, T., Muralidharan, S., Bae, J., Ha, Y., Lee, H., Park, K., & Kim, D. (2007). Accelerated short-term techniques to evaluate the corrosion performance of steel in fly ash blended concrete. Building and Environment, 42, 78-85.   DOI
8 Hooton, R. D., & Emery, J. J. (1990). Sulphate resistance of a Canadian slag cement. ACI Materials Journal, 87(6), 547-555.
9 Horsakulthai, V., Phiuvanna, S., & Kaenbud, W. (2011). Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage. Construction and Building Materials, 25, 54-60.   DOI
10 Hossain, K. M. A. (2003). Blended cement using volcanic ash and pumice. Cement and Concrete Research, 33, 1601-1605.   DOI
11 Hossain, K. M. A. (2009). Resistance of scoria-based blended cement concrete against deterioration and corrosion in mixed sulfate environment. Journal of Materials in Civil Engineering ASCE, 21(7), 299-308.   DOI
12 Hossain, A. B., Shirazi, S. A., Persum, J., Neithalath, N. (2008). Properties of concrete containing vitreous calcium aluminosilicate pozzolan. In Proceedings of the 87th transportation research board annual meeting, January, Washington DC.
13 Irassar, E. F., Gonzalez, M. A., & Rahhal, V. (2000). Sulfate resistance of type V cements with limestone filler and natural pozzolan. Cement & Concrete Composites, 22(5), 361-368.   DOI
14 ISO 4012 (1978). Concrete: Determination of compressive strength of test specimens. London, UK: ISO.
15 Khedr, S. A., & Idriss, A. F. (1995). Resistance of silica-fume concrete to corrosion-related damage. ASCE, Journal of Materials in Civil Engineering, 7(2), 102-107.   DOI
16 Lawrence, C. D. (1990). Sulfate attack on concrete. Magazine of concrete Research, 42(153), 249-264.   DOI
17 Mehta, P. K., & Monteiro, P. J. M. (2006). Concrete: Microstructure, properties, and materials (3rd ed.). New York, NY: McGraw-Hill, ISBN 0-07-146289-9.
18 Neville, A. M. (2011). Properties of concrete (5th ed.). London, UK: Pearson Education.
19 Mindess, S., Young, J. F., & Darwin, D. (2003). Concrete (2nd ed.). Upper Saddle River, NJ: Prentice Hall.
20 Montgomery, D. C., & Peck, E. A. (1982). Introduction to linear regression analysis. New York, NY: Wiley.
21 Parande, A. K., Babu, B. R., Karthic, M. A., Deepak Kumaar, K. K., & Palaniswamy, N. (2008). Study on strength and corrosion performance for steel embedded in metakaolin blended concrete/mortar. Construction and Building Materials, 22, 127-134.   DOI
22 Pavlik, V. (1994). Corrosion of hardened cement paste by acetic and nitric acids; Part II: Formation and chemical composition of the corrosion products layer. Cement and Concrete Research, 24, 1495-1508.   DOI
23 Pourkhorshidi, A. R., Najimi, M., Parhizkar, T., Jafarpour, F., & Hillemeier, B. (2010). Applicability of the standard specification of ASTM C 618 for evaluation of natural pozzolans. Cement & Concrete Composites, 32, 794-800.   DOI
24 Ramezanianpour, A. A., Mirvalad, S. S., Aramun, E., Peidayesh, M. (2010). Effect of four Iranian natural pozzolans on concrete durability against chloride penetration and sulfate attack. In P. Claisse et al. (Ed.), Proceedings of the 2nd international conference on sustainable construction materials and technology, 28-30 June, Ancona, Italy.
25 Reddy, D. V., Edouard, J. B., Sobhan, K., Rajpathak, S.S. (2011). Durability of reinforced fly ash-based geopolymer concrete in the marine environment. In Proceedings of the 36th Conference on Our World in Concrete & Structures, August 14-16, Singapore.
26 Saraswathy, V., & Song, H.-W. (2007). Corrosion performance of rice husk ash blended concrete. Construction and Building Materials, 21, 1779-1784.   DOI
27 Rodriguez-Camacho, R. E., & Uribe-Afif, R. (2002). Importance of using natural pozzolans on concrete durability. Cement and Concrete Research, 32, 1851-1858.   DOI
28 Rossignolo, J. A., & Agesini, M. V. C. (2004). Durability of polymer-modified lightweight aggregate concrete. Cement & Concrete Composites, 26(4), 357-380.
29 Rukzon, S., & Chindaprasirt, P. (2009). Effect of grinding on chemical and physical properties of rice husk ash. Int J Miner Metal Mater, 16(2), 242-247.   DOI
30 Senhadji, Y., Escadeillas, G., Khelafi, H., Mouli, M., & Benosman, A. S. (2012). Evaluation of natural pozzolan for use as supplementary cementitious material. European Journal of Environmental and Civil Engineering, 16(1), 77-96.   DOI
31 Shaker, F. A., El-Dieb, A. S., & Reda, M. M. (1997). Durability of styrene-bautadiene latex modified concrete. Cement and Concrete Research, 27(5), 7711-7720.
32 Talbot, C., Pigeon, M., Maarchand, M., & Hornain, J. (1995). Properties of mortar mixtures containing high amounts of various supplementary cementitious materials. In V. M. Malhotra (Ed.), Proceeding of the fifth international conference on the use of fly ash, silica fume, slag, and natural pozzolana in Concrete, ACI SP 153, Milwaukee (pp. 125-152). Milwaukee, WI: American Concrete Institute.
33 Tangchirapat, W., Jaturapitakkul, C., & Chindaprasirt, P. (2009). Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete. Construction and Building Materials, 23(7), 2641-2646.   DOI
34 Turanli, L., Uzal, B., & Bektas, F. (2005). Effect of large amounts of natural pozzolan addition on properties of blended cements. Cement Concrete Research, 35(6), 1106-1111.   DOI
35 The General Establishemnt of Geology and Mineral Resources in Syria. (GEGMR). (2007). Official document no. (3207/T/9), dated 21.11.2007 (in Arabic).
36 The General Organisation for Cement & Building Materials. (GOCBM) (2011). www.cemsyria.com. Accessed 2011 (in Arabic).
37 The General Establishment of Geology and Mineral Resources in Syria (GEGMR). (2011). A Guide for mineral resources in Syria (in Arabic).
38 Al-Chaar, G. K., Al-Kadi, M., & Asteris, P. G. (2013). Natural pozzolan as a partial substitute for cement in concrete. The Open Construction and Technology Journal, 7, 33-42.   DOI
39 ACI Committee 201. (1991). Guide to durable concrete. ACI Materials Journal, 88, 551-554.
40 al-Amoudi, O. S. B. (2002). Attack on plain and blended cements exposed to aggressive sulfate environments. Cement & Concrete Composites, 24, 304-316.
41 Al-Dulaijan, S. U., Maslehuddin, M., Al-Zahrani, M. M., Sharif, A. M., Shameem, M., & Ibrahim, M. (2003). Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Cement & Concrete Composites, 25, 429-437.   DOI
42 Al-Tayyib, A. J., & Al-Zahrani, M. M. (1990). Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. ACI Materials Journal, 87(2), 108-113.
43 ASTM C1012 (2004). Standard test method for length change of hydraulic-cement mortars exposed to a sulfate solution. West Conshohocken, PA: ASTM International.
44 ASTM C1202 (2001). Electrical indication of concrete's ability to resist chloride ion penetration. West Conshohocken, PA: ASTM International.
45 Aydin, S., Yazici, H., Yigiter, H., & Baradan, B. (2007). Sulfuric acid resistance of high-volume fly ash concrete. Building and Environment, 24, 717-721.
46 ASTM C267 (2001). Standard test methods for chemical resistance of mortars, grouts, and monolithic surfacings and polymer concretes. West Conshohocken, PA: ASTM International.
47 ASTM C618 (2001). Standard test methods for coal ash and raw or calcined natural pozzolan for use as a mineral admixture in concrete. West Conshohocken, PA: ASTM International.
48 ASTMC595 (2001). Standard specification for blended hydraulic cements. West Conshohocken, PA: ASTM International.
49 Cao, H. T., Bucea, I., Ray, A., & Yozghatlian, S. (1997). The effect of cement composition and pH of environment on sulfate resistance of Portland cements and blended cements. Cement & Concrete Composites, 19(2), 161-171.   DOI
50 Cavdar, A., & Yetgin, S. (2007). Availability of tuffs from northeast of Turkey as natural pozzolans on cement, some chemical and mechanical relationships. Construction and Building Materials, 21, 2066-2071.   DOI
51 Chindaprasirt, P., Chotithanorm, C., Cao, H. T., & Sirivivatnanon, V. (2007). Influence of fly ash fineness on the chloride penetration of concrete. Construction and Building Materials, 21, 356-361.   DOI
52 Colak, A. (2003). Characteristics of pastes from a Portland cement containing different amounts of natural pozzolan. Cement and Concrete Research, 33, 585-593.   DOI
53 EN 196-2 (1989). Methods of testing cement, part 2. Chemical analysis of cement. Brussels, Belgium: European Committee for Standardization.