• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.1
• /
• pp.41-48
• /
• 2009

The present study has been performed to investigate the thermal characteristics of under-ventilated compartment fire which is a typical fire condition in structures. A series of fire experiments was conducted to characterize the thermally driven flow in a 2/5 scale ISO 9705 fire compartment. Three different fuels were used in this test series, methane gas, heptane pool, and polystyrene pellets fire. In order to measure accurate temperature, double shield aspirated thermocouples reducing the effect of radiative energy exchange on temperature measurement were used in addition to bare bead thermocouples. The upper layer temperature for well ventilated fire was increased with increasing heat release rate, but it was slightly decreased for under-ventilated fire. The measured temperatures in the upper layer at the front sampling location were higher than at the rear. Thermal characteristics through the doorway were also analysed for a wide range of heat release rates. This study provides a comprehensive and quantitative assessment of fire behavior for under-ventilation condition of fire.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.68-75
• /
• 2001

In this paper, a number of supported metal oxides and perovskite type catalysts were investigated for the NOx reduction from the diesel engine exhaust gas. All catalysts were made into pellets type with diameter of 3-4 mm alumina(Al$_2$O$_3$) as a supporter. These samples were tested by real diesel exhaust gas which contains CO, hydrocarbons and soot in the temperature range of 150~55$0^{\circ}C$ with the $3300h^{-1}$ space velocity (SV). Among the results, several promising catalysts showed NOx conversion above 50% in the temperature range of 150-35$0^{\circ}C$. From these results supported metal oxides catalysts and perovskite type could be recommended for the practical application to the automobile exhaust treatments.

• Journal of Hydrogen and New Energy
• /
• v.31 no.2
• /
• pp.202-209
• /
• 2020

In methanol steam reforming, commercial catalysts in the form of pellets are mainly used, but there are limitations to directly apply them to underwater weapon systems that require shock resistance and heat transfer characteristics. In this study, to overcome this problem, a multi-layer cup structure (MLCS) was applied to support a pellet type catalyst. The characteristics of pellet catalyst supported by MLCS and the pellet catalyst supported by conventional structure (CS) were compared by the reforming experiment. In the case of MLCS, a high methanol conversion rate was shown in the temperature range 200 to 300℃ relative to the CS manufactured with the same catalyst weight as MLCS. CS shown similar characteristics to MLCS when it manufactured in the same volume as MLCS by adding an additional 67% of the catalyst. In conclusions, MLCS can not only reduce catalyst usage by improving heat transfer characteristics, but also support pellet catalyst in multiple layers, thus improving shock resistance characteristics.

• Preventive Nutrition and Food Science
• /
• v.3 no.1
• /
• pp.98-104
• /
• 1998

As an efffort ot construct LAB (latice acid bacteria), capable of utilizing starch as fermentation substrate without the aid of externally supplied enzymes, plasmid vectors containing the amyL($\alpha$-amylase/pullulansase gene) from Clostridium thermophydrosulfuricum, and glucoamylase cDNA from Asperigillus shirousamii were constructed and introduced itno E. coli and L. lactis. For expression in procaryotes , 1.9kb glucoamylase cDNA encoding the mature form of enzyme was PCR amplified and translationaly fused to a PCR amplified 260 bp fragment containing the promotor and secretion signals of amyl in the same reading frame. The production of $\alpha$-amylase, Apu, and glucoamlase in E. coli and L. lactis was confirmed by enzyme assay and zymography . Enzymeswere detected in both cellpellets and supernatants, indicating theworking of scretion signals in heterologous hosts. The efficiencies of secretion were varibale depending on the gene and host. The highest $\alpha$- amylase acitivity observed was 1.1 units and most activiity was detected from thecell pellets. The degree of gene expression in both hosts and the effect on the growth of hosts were examined.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.6
• /
• pp.726-731
• /
• 1999

It was discovered that ammonium phosphate in the medium played an important role in both growing mycelium and producing exopolysaccharides (EPS) from G. lucidum. In lower concentration levels of ammonium phosphate (0-3 g/l), an improved mycelial growth was observed by maintaining more filamentous morphology than in high concentrations (5-11 g/l). In addition, it was confirmed by comparing the factual dimension and frequency of the area regarding the mycelial pellets. This must be attributed to limitations of nutrient transfer by maintaining filamentous mycelium during the cultivation in a low ammonium phosphate containing medium. On the other hand, the best EPS production was observed in medium with the absence or low concentration of ammonium phosphate. The shear stress of the culture broth was greatly affected by the shear rate, as compared with that of the culture broth with high ammonium phosphate concentration. The rheological characteristics of the fermentation broth and filtrate worked well according to the Herschel-Bulkley model. It was also found that the morphological changes of the mycelium resulting from the ammonium phosphate concentration directly affected the rheological characteristics of the system and resulted in reversely affecting the EPS production levels. Based on these results, it can be concluded that delicate regulation of the ammonium phosphate concentration in the culture media should be provided in order to obtain optimal mycelial growth and/or EPS production.

• Korean Journal of Korean Medical Institute of Dermatology and Aesthetics
• /
• v.1 no.1
• /
• pp.41-52
• /
• 2005

The aim of this study was to investigate the effect of Fructus Forsythiae on the melanogenesis. To determine whether Fructus Forsythiae methanol extract suppress melanin synthesis in cellular level, HM3KO human melanoma cells were cultured in the presence of various concentrations of Fructus Forsythiae methanol extract and the effects on cell proliferation, tyrosinase activity and melanin contents were examined. Treatment with Fructus Forsythiae methanol extract inhibited tyrosinase activity, regulate melanin biosynthesis as the key enzyme in melanogenesis, in a dose-dependent manner. And also suppressed melanin contents as a dose dependent manner without cytotoxicity morphological change. It was observed that the color of cell pellets was totally different from the control. These results suggest that the inhibitory effect of Fructus Forsythiae methanol extract on melanogenesis is due to the suppression of tyrosinase in HM3KO cells and Fructus Forsythiae is a candidate for an efficient whitening agent.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.202-204
• /
• 1994

Nowadays Perovskite $La_{1-x}Sr_xCoO_3$ is a preferred cathode material in the construction Solid Oxide Fuel Cell (SOFC). The $La_{1-x}Sr_xCoO_3$ with Sr contents ranging from X=0.0 to X=1.0 were prepared by a citrate method. All samples were examined by X-ray powder diffraction. The samples used for measuring thermal expansion were prepared as pellets by cold pressing and subsequent sintering in air at $1200^{\circ}C$ for 5 hours. To measure the sub-product of $La_{1-x}Sr_xCoO_3$ with YSZ, where coating films were sintered at $1200^{\circ}C$ for 5 hour.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.84-90
• /
• 1999

The finishing process for dies and molds is directly related to finished surface quality, but many parts of process depend on human labor which needs much time and value. So automatic finishing machine has been produced for dies and molds, and applied widely for finishing process. Conventionally finishing machine has applied resin bonded finishing pad as a tool, but the removal ability of pad decreases greatly as finishing process goes on. In the finishing mechanism for dies and molds, finishing process is affected severely by cutting process, so can be divided into removing cusp and smoothing surface process. So, this study investigated the application of cast iron bonded diamond pellet for press dies, which is considered to have better characteristics than the other metal bonded pellets. The finishing characteristics were compared the between finishing pellet and pad. And finishing performance was appraised as the several cutting surfaces.

• Resources Recycling
• /
• v.8 no.1
• /
• pp.29-36
• /
• 1999

Utilization of iron bearing dusts has been needed agglomeration prior to use as a burden in blast furnace The cold bonded pellet process using iron bearing dusts has been developed as an alternative to the conventional heat indurated pelletizing process. Partial substitution of cements with cheaper materials would decrease the production cost of pellet. This paper discusses the strength of pellet containing blast furnace slag as a bonding material in pelletizing a cold bonded agglomerates. Depending upon the quality, half of the cement required may be replaced by slag in the pellets with a strength of around 150 kgf. Some of the physicochemical properties of the bonding materials are also investigated in the present work.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.279-284
• /
• 2006

Activated carbon is proposed as a new application of wastepaper recycling other than the paper-making. Waste kraft bag is considered to be a suitable raw material for activated carbon because of its low ash content. Small pellets of wastepaper squeezed out from the continuous kneader were carbonized in a nitrogen atmosphere and activated using carbon dioxide. The BET specific surface areas of activated carbon prepared from waste kraft bag was $1,285m^{2}/g$, which is higher than commercially available activated carbons. The activated carbon prepared from wastepaper has a well-developed porous structure, particularly in mesopore and macropore ranges. As a result, activated carbon with iodine adsorption capacity of 1,400 mg/g was obtained from waste kraft bag. In this paper, adsorption amount of Bisphenol A (BPA) was determined to investigate adsorbability of activated carbon from waste kraft bag. Adsorption measurements were on solutions ranging from $0.1{mu}g/L\;to\;100mg/L$. The activated carbon from waste kraft bag gave higher BPA adsorbabilities over a wide range, compared with commercially available activated carbons.