• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.462-468
• /
• 2022

The selection and effective utilization of peak-fitting software for conventional gamma-ray spectrum analysis is significant for accurate determination of the mass fraction of elements, particularly in complex peak regions. Majority of the peak-fitting programs can derive similar peak characteristics for singlet peaks, but very few programs can deconvolute multi-peaks in a complex region. The deconvolution of multi-peaks requires special peak-fitting functions, such as left and right-skew distributions. In the this study, 843.76 keV (²⁷Mg) peak area from the complex region (840 keV-850 keV) determined and compared using four different peak-fitting programs, namely, GammaVision, Genie2000, HyperLab, and HyperGam. The 843.76 keV peak interfered with 841.63 keV (^152mEu) and 846.81 keV (⁵⁶Mn). The total Mg concentration was determined through k₀-instrumental neutron activation analysis by applying the isotopic interference correction factor ²⁷Al(n,p)²⁷Mg through the simultaneous determination of Al concentration. HyperLab and HyperGam peak-fitting programs reported consistent peak areas, and resultant concentrations agreed with the certified values of matrix-certified reference materials.

• Composites Research
• /
• 제35권1호
• /
• pp.8-12
• /
• 2022

테라헤르츠(THz)파의 디컨벌루션을 통한 유리섬유 복합재 내부 결함 신호 분석 기법을 연구하였다. 결함이 존재하는 유리섬유 복합재료 시편을 제작하였고, Terahertz Time-Domain Spectroscopy (THz-TDS) 시스템의 반사모드를 통해 THz 신호를 측정하였다. 디컨벌루션을 위해 THz 입사 신호와 검출 신호의 Normalized Cross Correlation (NCC) 계산을 통해 THz 신호의 피크 위치를 증폭하였다. 증폭된 피크의 위치 및 세기를 임펄스로 추출하였고 THz 원신호에서 추출된 임펄스 위치의 신호를 제거하였다. 해당 과정을 반복함으로써 시편의 경계면을 나타내는 THz 검출 신호의 주요 임펄스를 도출하였다. 주요 임펄스와 기준 신호의 컨벌루션을 통해 노이즈가 제거된 THz 원신호의 복원이 가능한 것을 확인함으로써 디컨벌루션 과정을 검증하였다. 결과적으로 주요 임펄스들의 검출 시간을 통해 15 ㎛ 이내의 정확도로 유리섬유 복합재 내부 결함의 두께 판별이 가능하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.209-213
• /
• 2006

In this paper describes image enhancement technique using deconvolution processing for ultrasonic nondestructive testing. . When flaws are detected for B-scan or C-scan, blurring effect which is caused by the moving intervals of transducer degrades the quality of images. In addition, acquisited images suffer form speckle noise which is caused by the ultrasonic components reflected from the grain boundary of material [1,2]. The deconvolution technique can restore sharp peak value or clean image from blurring signal or image. This processing is applied to C-scan image obtained from known specimen. Experimental results show that the deconvolution processing contributes to get improved the quality of C-scan images.

• 한국산학기술학회논문지
• /
• 제8권2호
• /
• pp.245-249
• /
• 2007

본 논문은 핵발전소의 초음파 비파괴 평가를 수행하기 위하여 핵발전소 설비의 초음파 비파괴 평가시 발생될 수 있는 스펙클 잡음을 억제하고 디컨벌루션 기법을 이용하여 결함의 정확한 위치 및 크기를 추정할 수 있는 영상 처리 기법을 제안하였다. 제안된 방법은 실제 핵발전소의 증기발생기 파이프라인으로 만들어진 시편을 이용하여 영상의 선명도를 확인 할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.135-135
• /
• 1999

It is well known that Raman spectroscopy is powerful tool in analysis of sp3/sp3 bonding fraction in diamond-like carbon(DLC) films. Raman spectra of DLC film is composed of D-peak centered at 1350cm-1 and G-peak centered at 1530cm-1. The sp3/sp3 fraction is qualitatively acquired by deconvolution method. However, in case of DLC film, it is generally observed that G-peak position shifts toward low wavenumber as th sp3 fraction increases. However, opposite results were frequently observed in ta-C films. ta-C film has much higher residual compressive stress due to its high sp3 fraction compared to the DLC films deposited by CVD method. Effect of residual stress on G-peak position is most recommendable parameter in Raman analysis of ta-C, due to its smallest fitting error among many parameters acquired by peak deconvolution of symmetric spectra. In current study, the effect of residual stress on Raman spectra was quantitatively evaluated by free-hang method. ta-C films of different residual stress were deposited on Si-wafer by modifying DC-bias voltage during deposition. The variation of the G-peak position along the etching depth were observed in the free-hangs of 20~30${\mu}{\textrm}{m}$ etching depth. Mathematical result based on Airy stress function, was compared with experimental results. The more reliable analysis excluding stress-induced shift was possible by elimination of the Raman shift due to residual compressiove stress.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권2호
• /
• pp.145-150
• /
• 2022

The main purpose of this work was to restore the blurry chest CT images by applying a blind deconvolution algorithm. In general, image restoration is the procedure of improving the degraded image to get the true or original image. In this regard, we focused on a blind deblurring approach with chest CT imaging by using digital image processing in MATLAB, which the blind deconvolution technique performed without any whole knowledge or information as to the fundamental point spread function (PSF). For our approach, we acquired 30 chest CT images from the public source and applied three type's PSFs for finding the true image and the original PSF. The observed image might be convolved with an isotropic gaussian PSF or motion blurring PSF and the original image. The PSFs are assumed as a black box, hence restoring the image is called blind deconvolution. For the 30 iteration times, we analyzed diverse sizes of the PSF and tried to approximate the true PSF and the original image. For improving the ringing effect, we employed the weighted function by using the sobel filter. The results was compared with the three criteria including mean squared error (MSE), root mean squared error (RMSE) and peak signal-to-noise ratio (PSNR), which all values of the optimal-sized image outperformed those that the other reconstructed two-sized images. Therefore, we improved the blurring chest CT image by using the blind deconvolutin algorithm for optimal approach.

• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.114-119
• /
• 2018

Background: The retrospective dosimetry using RTL quartz can be improved by information for an optical sensitivity of sample connected with the equivalent dose determination. Materials and Methods: The quartz sample from a volcanic rock of Japan was used. After correcting the thermal quenching effect, RTL peaks of quartz were separated by the CGCD method cooperated with the general order kinetics. The number of overlapped glow peaks were ascertained by the $T_m-T_{stop}$ method. The optical sensitivity was examined by comparing the change of intensity on RTL glow peaks measured after exposure to light from a solar simulator with various illumination times. Results and Discussion: Seven glow peaks appeared to be overlapped on the RTL glow curve. The general order kinetics model was appropriate to separate glow peaks. After exposure to light from a solar simulator from a few minutes to 416 hr, the signals for peaks P4 and P5 decayed following the form of $f(t)=a_1e^{-{\lambda}1t}$, while the signals for peaks P6 and P7 decayed by the form of $f(t) = a_1e^{-{\lambda}1t}+a_2e^{-{\lambda}2t}+a_3e^{-{\lambda}3t}$. Conclusion: For dosimetric peaks, the times taken to reduce the RTL signal to half of its initial value were 70 sec for the peak P4, 54 s for the peak P5, 9,840 sec for the peak P6 and 26,580 sec for the peak P7, respectively. We conclude that the optical sensitivity of peaks P4, and P5 gives much higher than that of peaks P6 and P7.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2004년도 The 3rd Annual Conference for The Korean Society for Bioinformatics Association of Asian Societies for Bioinformatics 2004 Symposium
• /
• pp.296-306
• /
• 2004

LC/MS를 이용하여 펩타이드 혹은 단백질 같은 물질을 분석하는 실험이 급격히 늘어남에 따라 LC/MS 데이터를 자동으로 처리하는 기술에 대한 요구가 커지고 있다. 이러한 LC/MS 데이터의 자동 분석 기술에 대한 연구는 현재 활발히 진행되어 왔고, 이를 직접 구현한 여러 상용 소프트웨어들이 개발되어 있는 상태이다. LC/MS 데이터는 noise 제거, background 데이터 제거, deconvolution 알고리즘을 적용한 분자량(molecular weight) 할당 등의 작업을 거쳐 분석하게 된다. 이러한 과정을 거쳐 얻어진 분자량에 대한 데이터가 올바른 값인지 검증하는 작업이 필요하다. 본 논문에서는 이러한 검증 작업과 관련하여 Peak Clustering and Fitting(이하 PC&F)에 대한 알고리즘을 제안한다. PC&F은 peak 데이터들이 지니고 있는 속성에 대한 Mahalanobis distance를 이용하여 peak 데이터를 각 retention time에 따라 clustering 분석을 하는 작업이다. 본 논문에서 제안하는 PC&F 알고리즘을 Microsoft Visual C++ 6.0 MFC 환경에서 직접 개발한 소프트웨어(PeakClusterFitLCMS)로 실험하였다. 실험결과 PC&F 작업을 통해 동일한 구성물질로부터 발생한 peak 데이터를 모아서 보다 신뢰할 수 있는 분자량을 구할 수 있었고, 구성물질에 의해 발생되지 않은 noise peak 데이터를 찾아 제거시킬 수 있음을 확인할 수 있었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.55-61
• /
• 1999

A convolution algorithm combined with Fourier transformation is applied to the tomographic reconstruction of the asymmetric soot structure to identify the local soot volume fraction distribution. The line of sight integrated data from light extinction measurement with multi-angular scanning form basic information for the deconvolution. Multi-peak following interpolation technique is applied to obtain the effect of increasing number of scanning angles. Measurement of LII signal for the same flame shows the validity of this reconstruction technigue.

• 한국연소학회지
• /
• 제8권3호
• /
• pp.24-30
• /
• 2003

A convolution algorithm combined with Fourier transformation has been applied to the tomographic reconstruction of asymmetric soot structure to identify the local soot volume fraction distribution. Line-of-sight integrated data from light extinction measurement with multi-angular scanning formed basic information for the deconvolution. Multi-peak following interpolation technique was applied to obtain the effect of increasing number of scanning angles. Height-by-height reconstructed soot volume fraction distribution was compared with laser-induced incandescence signals.