• ETRI Journal
• /
• v.38 no.2
• /
• pp.217-226
• /
• 2016

We propose an architecture that reduces the power consumption and active area of such a modulator through a reduction in the number of active components and a simplification of the topology. The proposed architecture reduces the power consumption and active area by reducing the number of active components and simplifying the modulator topology. A novel second-order loop filter that uses a single operational amplifier resonator reduces the number of active elements and enhances the controllability of the transfer function. A trapezoidal-shape half-delayed return-to-zero feedback DAC eliminates the loop-delay compensation circuitry and improves pulse-delay sensitivity. These simple features of the modulator allow higher frequency operation and more design flexibility. Implemented in a 130 nm CMOS technology, the prototype modulator occupies an active area of $0.098mm^2$ and consumes 5.23 mW power from a 1.2 V supply. It achieves a dynamic range of 62 dB and a peak SNDR of 60.95 dB over a 15 MHz signal bandwidth with a sampling frequency of 780 MHz. The figure-of-merit of the modulator is 191 fJ/conversion-step.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.123-132
• /
• 2018

In this paper the strain energy density (SED) model is used to analyze the seismic behavior of suspen-domes and a new criterion is established for judging the seismic failure based on a characteristic point in the SED model. Firstly, a nonlinear time-history response analysis was carried out using the finite-element package ANSYS for typical suspen-domes subjected to different ground motions. The seismic responses including nodal displacements, ratios of yielding members, strain energy density and structural maximum deformation energy were extracted corresponding to the increasing peak ground acceleration (A). Secondly, the SED sum ($I_d$) was calculated which revealed that the $I_d-A$ curve exhibited a relatively large change (called a characteristic point) at a certain value of A with a very small load increment after the structures entered the elastic-plastic state. Thirdly, a SED criterion is proposed to judge the seismic failure load based on the characteristic point. Subsequently, the case study verifies the characteristic point and the proposed SED criterion. Finally, this paper describes the unity and application of the SED criterion. The SED method may open a new way for structural appraisal and the SED criterion might give a unified criterion for predicting the failure loads of various structures subjected to dynamic loads.

• KCI Concrete Journal
• /
• v.13 no.1
• /
• pp.69-78
• /
• 2001

The inelastic behavior of a reinforced concrete columns is influenced by a number of factors : 1) level of axial load, 2) tie spacing, 3) volumetric ratio of lateral steel, 4) concrete strength, 5) distribution of longitudinal steel, 6) strength of lateral steel, 7) cover thickness, 8) configuration of lateral steel, 9) strain gradient, 10) strain rate, 11) the effectively confined concrete core area, and 12) amount of longitudinal steel. A new constitutive model of a confined concrete is suggested in order to investigate the nonlinear behavior of the reinforced concrete columns under concentric loading. The developed constitutive model for the confined concrete takes into account the effects of effectively confined area as well as the horizontal and longitudinal distributions of the confining pressures. None of the existing models incorporated these two main effects at the same time. A total of different six constitutive models for the behavior of the confined concrete under concentric compression were compared with the sixty-one test results reported by different researchers. The superiority of the developed model in its accuracy is demonstrated by evaluating the error function, which compares the weighted averages for the sum of squared relative differences in peak compressive strength and corresponding strain, stress at strain equal to 0.015, and total area under stress-strain curve up to strain equal to 0.015.

• Atmosphere
• /
• v.18 no.4
• /
• pp.475-483
• /
• 2008

The hourly precipitation data from 1973 to 2007 observed at 60 weather stations over Korea are used to characterize the diurnal and semidiurnal cycles of total precipitation amount, intensity and frequency and examine their spatial patterns and interannual variations. The results show that the diurnal cycle peaks in the morning (03-09LST) and the semidiurnal cycle peaks in the late afternoon (16-20LST). It is found that the spatial variations of the peak phase of diurnal or semidiurnal cycle relative to their corresponding seasonal mean cycle are considerably small (large) for total precipitation amount and intensity (frequency, respectively) in both winter and summer seasons. Also, the diurnal phase variations for individual years relative to the seasonal mean precipitation show the significant interannual variability with dominant periods of 2-5 years for all three elements of precipitation and the slightly decreasing trend in total precipitation amount and intensity. To compare the relative contributions of frequency and intensity to the diurnal and semidiurnal cycles (and their sum) of total precipitation amount, the percentage variance of each cycle of precipitation amount explained by frequency is estimated. The fractional variance accounted for by precipitation intensity is greater than that of frequency for these three cycles. All above analyses suggest that intensity plays a more important role than frequency in the diurnal variations of total precipitation amount.

• Korean Journal of Food Science and Technology
• /
• v.17 no.3
• /
• pp.208-212
• /
• 1985

The residence time distributions were measured experimentally to determine the effect of reverse screw elements at various screw configurations in twin screw extruder. A simple model was used to estimate the number of filled C-chamber on the forwarding screw. The inclusion of reverse-screw elements resulted in the increase of median residence time and the broadening of color distribution. True residence time was affected by using the reverse screw elements just before the die. The number of filled C-chamber was decreased with the increase of screw revolution speed at the same screw configuration.

• Earthquakes and Structures
• /
• v.13 no.5
• /
• pp.455-464
• /
• 2017

This paper develops a new method for analyzing the structural seismic behavior of single-layer reticulated shells based on exponential strain energy density (ESED). The ESED method reveals a characteristic point from a relationship between ESED sum and peak seismic acceleration. Then, the characteristic point leads to an updated concept of structural failure and an ESED-based criterion for predicting structural failure load. Subsequently, the ESED-based criterion and the characteristic point are verified through numerical analysis of typical single-layer reticulated shells with different configurations and a shaking table test of the scale shell model. Finally, discussions further verify the rationality and application of the ESED-based criterion. The ESED method might open a new way of structural analysis and the ESED-based criterion might indicate a prospect for a unified criterion for predicting seismic failure loads of various structures.

• Archives of Pharmacal Research
• /
• v.4 no.2
• /
• pp.75-84
• /
• 1981

As the cetyltrimenthy ammonium bromide (CTAB) concentration increases to $2{\times}10^{-4}$/M the absorption maximum of ethyl orange (EO) makes a blue shift from 475 mm to 395 mm. At higher concentration of CTAB than $2{\times}10^{-4}$ / M the absorption maximum shifts to higher wavelength than 395 nm. A new peak at 395 nm is shown to result from the mixed micelle due to dye stacking interaction rather than from a change in dye geometry. Because Raman spectra of EO on interaction with varying amount of CTAB are similar to that of EO in water. EO retains trans azo type on interaction with CTAB. There is a change of c.m.c.s. of CTAB for the mixed micelle in the presence of salt. The effect of added salt on C. M. C. of CTAB for the mixed micelle is given that the logarithm of the c. m. c. is a linear function of the logarithm of the sum of the c. m. c. and the concentration of added salt.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1151-1155
• /
• 2008

This study aimed to investigate the alterations in plasma antioxidant activity after the consumption of a single oral dose of curcumin, vitamin C, and E administered individually or in combination to (i) assess possible synergies or antagonism between the antioxidants and (ii) determine the optimal composition of the antioxidant mixture such that the duration of action is prolonged to beyond that of individual antioxidants. Each antioxidant was administered to male Sprague-Dawley rats, and blood samples were drawn at different time points up to 180 min to measure the plasma total antioxidant capacity (TAC). Five antioxidant compositions (M1-M5) were evaluated to assess the possible synergies or antagonisms among them and to determine the optimal composition of the antioxidant mixture. Blood samples were collected up to 360 min post-consumption. A single oral dose of individual antioxidants significantly increased the TAC values; however, the time to reach the peak TAC value varied. Among the 5 antioxidant compositions, M2 exhibited the highest and most prolonged antioxidant effect in plasma; this was greater than the proportional sum of the effects of the individual antioxidants in the composition. This result indicates a synergistic interaction among antioxidants in the optimal composition M2.

• ETRI Journal
• /
• v.41 no.4
• /
• pp.415-425
• /
• 2019

Generative adversarial networks (GAN) have been successfully used in many image restoration tasks, including image denoising, super-resolution, and compression artifact reduction. By fully exploiting its characteristics, state-of-the-art image restoration techniques can be used to generate images with photorealistic details. However, there are many applications that require faithful rather than visually appealing image reconstruction, such as medical imaging, surveillance, and video coding. We found that previous GAN-training methods that used a loss function in the form of a weighted sum of fidelity and adversarial loss fails to reduce fidelity loss. This results in non-negligible degradation of the objective image quality, including peak signal-to-noise ratio. Our approach is to alternate between fidelity and adversarial loss in a way that the minimization of adversarial loss does not deteriorate the fidelity. Experimental results on compression-artifact reduction and super-resolution tasks show that the proposed method can perform faithful and photorealistic image restoration.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.5
• /
• pp.699-705
• /
• 1986

Sb2S3 thin films were fabricated by vacuum evaporation of compound Sb2S3 at a pressure of 10**-5 torr. and in argon ambient. Then, their electrical and photoconductive properties were investigated. The Sb2S3 glass-layer showed maximum photosensitivity at the deposition rate of 250\ulcornersec, and Sb2S3 porous layer had mininum dielectric constant of 1.5 at the deposition rate of 0.3 um/sec and argon partial pressure of 0.2torr. Sb2S3 multi-layers were prepared at the different thickness ratio (B/A) to find the proper structural property suited for camera pick-up tube. Here, A is the sum of the thickness of Sb2S3 porous layer and Sb2S3 fine grain layer, and B is the thickness of Sb2S3 fine grain layer. As a result, photosensitivity had a peak value at the thickness ratio (B/A) of 60%.