• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.47-53
• /
• 1985

Various amount of $P_2O_5$ were added to $PbO-B_2O_3$ binary glass system to investigate its effect on the phase separation and physical properties of the glass. Experiments such as infrared spectroscopy scanning electron microscopy thermal expansion softening point and microhardnesses were done. Phase separation with $B_2O_3$ rich phase matrix and PbO rich phase droplet was observed for the glasses con-taining less than 10m/o of PbO while the opposite morphology of phase separation for the glasses containing more than 11m/o of PbO. By adding increasing amount of $P_2O_5$ their phase separation region was extended to the glass containing more than 20m/o of PbO. These effects can be interpreted in terms of the inoic field strength difference of each ions in the glasses. The abrupt changes of physical properties such as softening point thermal expansion and microhardness were observed for the glass with around 10m/o of PbO in this system. These changes are by the matrix composition change from TEX>$B_2O_3$ rich phase to PbO rich phase depending on PbO concentration.

• 분석과학
• /
• 제33권6호
• /
• pp.245-251
• /
• 2020

납은 암석의 연대측정, 지각의 진화 및 오염원의 기원 추적과 같은 지구화학적 연구에 유용하게 사용되어지는 원소로, 이를 위해선 고순도 원소 분리가 선행되어져야한다. 본 연구에서는 납을 분리해 내는데 있어서 용리액의 농도가 6M HCl 과 8M HCl 중 어느 것이 더 효율적인지 비교 검토 하였다. 그 결과, 6M HCl의 경우 8M HCl 보다 용리액을 다량으로 사용했음에도 불구하고 납 분리에 있어서는 효율적이지 않았다. 그리고 납 분리법에 대한 신뢰성 검증을 위하여 납 동위원소 표준물질(NIST NBS981)과 암석표준시료(BCR-2, GSP-2, JG-1a)의 납 동위원소비를 열이온화질량분석기로 측정한 결과, 기존 보고 값과 오차 범위 내에서 잘 일치하였다.

• 자원리싸이클링
• /
• 제19권3호
• /
• pp.9-15
• /
• 2010

국내 금 광산 폐광미로부터 비금속광물을 분리, 선별하는 공정 중에서 황비철광, 방연광 등이 혼합된 금속광물이 부산물로 회수되며, 이 부산물에는 Au, Pb, As, Fe 성분들이 매우 높게 농축되어진다. 이 부산물로부터 Au의 효율적 회수를 위해서는 우선 금 제련공정에 해로운 거동을 나타내는 금속성분들을 분리, 제거할 필요가 있다. 본 연구에서는 금 광산 폐광미로부터 회수된 금속광물 부산물로부터 Pb, As, Fe등을 제거, 분리하는 실험을 수행하였다. Pb는 알칼리 가압산화침출에 의하여 $120^{\circ}C$, 2M NaOH, 100psi $Po_2$, 250r.p.m., 4 wt.% 고체, 30 min. 침출조건에서 3% 이하 까지 제거시킬 수 있었으며, 침출잔사를 배소 및 자력선별처리하여 As 0.2% 이하, Fe 3% 이하 및 8,000 ppm 이상의 Au 함량을 갖는 비자성산물을 얻을 수 있었다.

• 방사선산업학회지
• /
• 제17권4호
• /
• pp.543-549
• /
• 2023

Thallium-201 (²⁰¹Tl) is a medical radioisotope which emits gamma rays when it decays and used in myocardial perfusion scans in single-photon emission tomography due to its similar properties to potassium. Currently, the Korea Institute of Radiological & Medical Sciences is the only institution producing ²⁰¹Tl in Korea, and optimization of ²⁰¹Tl production research is necessary to meet supply compared to domestic demand. To this end, technical analysis of plating target production and chemical separation methods essential for ²⁰¹Tl production research is conducted. It deals with the process of generating and separating ²⁰¹Tl radioisotope and target production, It can be generated through a nuclear reaction such as ^natHg(p,xn)²⁰¹Tl, ²⁰¹Hg(p,n)²⁰¹Tl, ^natPb(p,xn)²⁰¹Bi → ²⁰¹Pb → ²⁰¹Tl, ²⁰⁵Tl(p,5n)²⁰¹Pb → ²⁰¹Tl, and considering impure nuclide generated simultaneously with the use of proton beam energy of 35 MeV or less, it is intended to be produced using the ²⁰³Tl(p,3n)²⁰¹Pb→²⁰¹Tl nuclear reaction. In particular, the chemical separation of Tl is a very important element, and the chemical separation methods that can separate it is broadly divided into four types, including solid phase extraction, liquid-liquid, electrochemical, and ion exchange membrane separation. Some chemical separations require additional separation steps, such as methods using selective adsorption. Therefore, this technical report describes four chemical separation methods and seeks to separate high-purity ²⁰¹Tl using a method without additional separation steps

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.123-130
• /
• 2019

We investigated the electrochemical behavior of an electrode coated with a nickel hexacyanoferrate/graphene oxide (NiPB/GO) composite to evaluate its potential use for the electrochemical separation of radioactive Cs as a promising approach for reducing secondary Cs waste after decontamination. The NiPB/GO-modified electrode showed electrochemically switched ion exchange capability with excellent selectivity for Cs over other alkali metals. Furthermore, the repetitive ion insertion and desertion test for assessing the electrode stability showed that the electrochemical ion exchange capacity of the NiPB/GO-modified electrode increased further with potential cycling in 1 M of $NaNO_3$. In particular, this electrochemical treatment enhanced Cs uptake by nearly two times compared to that of NiPB/GO and still retained the ion selectivity of NiPB, suggesting that the electrochemically treated NiPB/GO composite shows promise for nuclear wastewater treatment.

• Mass Spectrometry Letters
• /
• 제4권4호
• /
• pp.87-90
• /
• 2013

Isotope amount ratios of lead in a bronze sample have been successfully determined using multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS). Matrix separation conditions were tested and optimized using ion exchange chromatography with anion-exchange resin, AG1-X8, and sequential elution of the 0.5 M HBr and 7 M $HNO_3$ to separate lead from very high contents of copper and tin in bronze matrix. Mercury was also removed efficiently in the optimized separation condition. The instrumental isotope fractionation of lead in the MC-ICP-MS measurement was corrected by the external standard sample bracketing method using an external standard, NIST SRM 981 lead common isotope ratio standard followed by correction of procedure blank to obtain reliable isotope ratios of lead. The isotope ratios, $^{206}Pb/^{204}Pb$, $^{207}Pb/^{204}Pb$, $^{208}Pb/^{204}Pb$, and $^{208}Pb/^{206}Pb$, of lead were determined as $18.0802{\pm}0.0114$, $15.5799{\pm}0.0099$, $38.0853{\pm}0.0241$, and $2.1065{\pm}0.0004$, respectively, and the determined isotope ratios showed good agreement with the reference values of an international comparison for the same sample within the stated uncertainties

• Bulletin of the Korean Chemical Society
• /
• 제25권2호
• /
• pp.233-236
• /
• 2004

Total impurity analysis of a primary standard solution is one of the essential procedures to determine an accurate concentration of the standard solution by the gravimetry. Bi impurity is determined in Pb standard solutions by inductively coupled plasma mass spectrometry (ICP-MS). The direct nebulization of the Pb standard solution produces a significant amount of the Pb matrix-induced molecular ions which give rise to a serious spectral interference to the Bi determination. In order to avoid the spectral interference from the interferent $^{208}PbH^+$, the hydride generation method is employed for the matrix separation. The Bi hydride vapor is generated by reaction of the sample solution with 1% sodium borohydride solution. The vapor is then directed by argon carrier gas into the ICP after separation from the mixture solution in a liquid-gas separator made of a polytetrafluoroethylene membrane tube. The presence of 1000 ${\mu}$g/mL Pb matrix caused reduction of the bismuthine generation efficiency by about 40%. The standard addition method is used to overcome the chemical interference from the Pb matrix. Optimum conditions are investigated for the hydride-generation ICPMS. The detection limit of this method is 0.5 pg/mL for the sample solutions containing 1000 ${\mu}$g/mL Pb matrix.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.779-783
• /
• 1996

Cation exchange distribution coefficients of poly(dithiocarbamate) were presented for $Cd^{2+}$, $Cr^{3+}$, and $Pb^{2+}$ in HCI. The distribution coefficients were determined tv using the batch method. Based on these distribution data, the separation possibilities of the heavy metal ions were discussed. The distribution coefficients of three heavy metal ions on dithiocarbamate resin were decreased as HCI concentrations were increased. The selective separation of $Cr^{3+}$ and $Cd^{2+}$ was possible by using 0.1M HCl in dithiocarbamate resin and the reproducibility test showed that the average absorptivity of resin was 90% in the case of $Cd^{2+}$ ion by the column method.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권5호
• /
• pp.9-19
• /
• 2021

This study evaluated the feasibility of combined use of physical separation and soil washing to remediate heavy metals (Pb and Cu) contaminated soil in a military shooting range. The soils were classified into two types based on the level of heavy metal concentrations: a higher contaminated soil (HCS) with Pb and Cu concentrations of 6,243 mg/kg and 407 mg/kg, respectively, and a lower contaminated soil (LCS) with their concentrations of 1,658 mg/kg and 232 mg/kg. Pb level in both soils exceeded the regulatory limit (700 mg/kg), and its concentration generally increased with decreasing soil particle size. However, in some cases, Pb concentrations increased with increasing soil particle size, presumably due to the presence of residues of bullets in the soil matrix. As a pretreatment step, a shaking table was used for physical separation of soil to remove bullet residues while fractionating the contaminated soils into different sizes. The most effective separation and fractionation were achieved at vibration velocity of 296 rpm/min, the table slope of 7.0°, and the separating water flow rate of 23 L/min. The efficiency of ensuing soil washing process for LCS was maximized by using 0.5% HCl with the soil:washing solution mixing ratio of 1:3 for 1 hr treatment. On the contrary, HCS was most effectively remediated by using 1.0% HCl with the same soil:solution mixing ratio for 3 hr. This work demonstrated that the combined use of physical separation and soil washing could be a viable option to remediate soils highly contaminated with heavy metals.

• 자원리싸이클링
• /
• 제28권3호
• /
• pp.53-58
• /
• 2019

폐납축적지 재활용 공정에서 발생한 납드로스는 비소 등의 유해물질을 함유하고 있어 적절한 처분이 요구되고 있다. 본 연구에서는 볼밀과 믹서밀로 분쇄한 납드로스를 대상으로 자력선별을 실시하여 비소 성분을 농축하고자 하였다. 볼밀에 의해 $150{\mu}m$ 이하로 분쇄된 시료를 대상으로 10000 G와 2000 G의 자석봉으로 순차적 자력선별을 실시한 결과, 10000 G의 비자착물에서는 비소성분이 검출되지 않아 유해물질이 제거된 산물을 확보가능하였다. 추가적인 2000 G 자력선별의 자착물에는 비소가 18.87 %까지 농축되는 것을 확인하였다. 또한 볼밀 분쇄시 $300{\mu}m$ 이상인 분쇄산물을 대상으로 믹서밀로 $150{\mu}m$ 이하로 분쇄하고 4000 G와 2000 G의 자석봉으로 순차적인 자력선별을 실시한 결과 2000 G의 자착물에 비소가 21.021 %로 농축된 것이 확인되었다. 비소는 XRD 결과에서 $Fe_2As$로 존재하는 것을 확인하였으며, 분쇄와 자력선별에 의해 비소 성분이 원시료의 0.6 %에서 21.021 %까지 농축되는 것을 확인하였다.