• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.341-344
• /
• 2001

H.323 proposes to use Mobile IP and H.323 ad hoc conference signaling to provide Handoff function to an H.323 mobile terminal. But the H.323 ad hoc conference signaling has a drawback. It requires an H.323 terminal to do a complex conference signaling which takes a longer signaling time. In this paper, we propose an GK architecture that provides Handoff function effectively using 3$^{rd}$ P'||'||'||'||'||'&'||'||'||'||'||'R(Third party initiated Pause and Rerouting) signaling which are done through H.245 logical channel. The GK which is implementing 3$^{rd}$ P'||'||'||'||'||'&'||'||'||'||'||'R signaling only requires an H.323 endpoint to do the H.323 basic signaling in reestablishing media channel and gives the faster Handoff signaling. To do this, our GK has derived H.245 control channel using tunneling f3r all H.323 calls including the fast connect calls which enable terminals communicate each other if they doesn't have H.245 control channel .municate each other if they doesn't have H.245 control channel .

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1511-1520
• /
• 2004

A flow visualization of the two-dimensional rigid fling-clap motions of the flat-plate wing are performed to gain knowledge of butterfly mechanisms that might be employed by butterflies during flight. In this numerical visualization, the time-dependent Navier-Stokes equations are solved for cyclic fling and clap types of wing motion. The separation vortex pair that is developed in the fling phase of the cyclic fling and clap motion is observed to be stronger than those of the fling followed by clap and pause motion(1st cycle motion). This stronger separation vortex pair in the fling phase is attributable to the separation vortex pair of the outside space developed in the clap phase as it moves into the opening in the following fling phase. Accordingly, higher lift and power expenditure coefficients in the fling after clap phase is caused by the stronger separation vortex pair.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.218-222
• /
• 2002

Micro-EDM is generally used far machining micro holes, pockets, and 3-D structures. For micro-EDM, first of all, micro-electrode fabrication is needed and WEDC system is proposed for tool electrode fabrication method. When tool electrode is fabricated using WEDG system, its characteristics are under the control of many EDM parameters. Also relations between the parameters affect electrode fabrication. In this study, experiments are carried out to analyze effects of EDM parameters about electrode surface integrity on micro-electrode fabrication. Experimental method and analysis are used to experimental design method. Factors used in experiments are composed of capacitance, resistance, pause time, wire feed rate, spindle rotating speed. As a result of experiments, capacitance and resistance affect electrode surface.

• 동력기계공학회지
• /
• 제21권3호
• /
• pp.74-84
• /
• 2017

This paper presents the development of the underwater cleaning robot platform for a higher efficiency in manufacturing industry. Human operators directly go into the cistern and clean sludge after drainage of the water so far. It is sometimes dangerous because of the harmful chemical materials from the product making process. In addition, it takes long time for water drainage and supplying it back. However, the robot cleaning operation does not need to drain water so that it could be applied to the sludge cleaning work at any time without the plant pause. Moreover, it can prevent the safety accidents because human operators are not necessary to enter directly the sludge cisterns. This paper shows the performance of cleaning work that can be applied in the industrial field through the design and development of underwater cleaning robot platform. And these results demonstrate that the developed underwater cleaning robot has great possibilities to clean other industrial water cisterns.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.1034-1051
• /
• 2016

Mobility models are invaluable for determining the performance of routing protocols in opportunistic networks. The movement of nodes has a significant influence on the topological structure and data transmission in networks. In this paper, we propose a new mobility model called the campus-based community mobility model (CBCNM) that closely reflects the daily life pattern of students on a real campus. Consequent on a discovery that the pause time of nodes in their community follows a power law distribution, instead of a classical exponential distribution, we abstract the semi-Markov model from the movement of the campus nodes and analyze its rationality. Then, using the semi-Markov algorithm to switch the movement of the nodes between communities, we infer the steady-state probability of node distribution at random time points. We verified the proposed CBCNM via numerical simulations and compared all the parameters with real data in several aspects, including the nodes' contact and inter-contact times. The results obtained indicate that the CBCNM is highly adaptive to an actual campus scenario. Further, the model is shown to have better data transmission network performance than conventional models under various routing strategies.

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1496-1502
• /
• 1998

본 논문에서는 인터넷상에서 트래픽이 심한 상황에서도 만족할만한 오디오 품질을 유지할 수 있는 실시간 오디오 방송 서비스 시스템을 개발하였다. 신뢰성 있는 실시간 데이터 전송의 구현을 위하여 TCP/IP와 UDP/IP의 전송특성을 비교분석하였고 손실패킷의 복구방법으로 잉여오디오 정보를 이용한 패킷 복구 알고리즘과 연집 에러를 분산시켜주는 인터리빙 기법을 적용하였다. 실험결과, TCP/IP를 이용한 경우는 일정한 수신률을 보였으나 패킷손실로 인한 음질저하현상이 나타났다. 잉여오디오 정보와 인터리빙을 이용한 손실패킷 복구율은 그림 9와 같으며 그에 따른 지연시간은 그림 4와 같다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2140-2142
• /
• 2005

This paper presents the experimental results on the preliminary breakdown characteristics under a highly non-uniform electric field in $SF_6/CO_2$ gas mixtures. The impulse preliminary breakdown developments are investigated by the measurements of corona current and light emission images. As a result, the preliminary breakdown development mechanisms for both positive and negative polarities are same. The first streamer corona is initiated at the tip of needle electrode, and the leaders develop with a stepwise propagation and bridge the test gap. The pause time of leader pulses in the positive polarity is significantly shorter than that in the negative polarity. Also, the time interval between the first streamer corona onset and breakdown in the negative polarity was much longer than that in the positive polarity The discharge channel paths in the positive polarity were zigzag. On the other hands, the leader channel in the negative polarity was thicker than that in the positive polarity.

• Healthcare Informatics Research
• /
• 제24권4호
• /
• pp.387-393
• /
• 2018

Objectives: This paper describes an experience of implementing seamless service trials online and offline by adopting Internet of Things (IoT) technology based on near-field communication (NFC) tags and Bluetooth low-energy (BLE) beacons. The services were provided for both patients and health professionals. Methods: The pilot services were implemented to enhance healthcare service quality, improve patient safety, and provide an effective business process to health professionals in a tertiary hospital in Seoul, Korea. The services to enhance healthcare service quality include healing tours, cancer information/education, psychological assessments, indoor navigation, and exercise volume checking. The services to improve patient safety are monitoring of high-risk inpatients and delivery of real-time health information in emergency situations. In addition, the services to provide an effective business process to health professionals include surveys and web services for patient management. Results: Considering the sustainability of the pilot services, we decided to pause navigation and patient monitoring services until the interference problem could be completely resolved because beacon signal interference significantly influences the quality of services. On the other hand, we had to continue to provide new wearable beacons to high-risk patients because of hygiene issues, so the cost increased over time and was much higher than expected. Conclusions: To make the smart connected hospital services sustainable, technical feasibility (e.g., beacon signal interference), economic feasibility (e.g., continuous provision of new necklace beacons), and organizational commitment and support (e.g., renewal of new alternative medical devices and infrastructure) are required.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.75-82
• /
• 1986

음향집어에 관한 기초자료를 제공하기 위하여 정치망내의 수중환경소음과 방성음의 분포 및 집어효과를 실험, 분석하였고, 그 결과를 요약하면 다음과 같다. 1. 수중환경 소음 및 방성음의 중심주파수대는 각각 150Hz~400Hz, 400Hz~1000Hz이고, 음압준위는 원통, 헛통, 장등, 비탈그물의 순으로 , 비탈그물, 원통, 헛통, 장등의 순으로 각각 높았다. 양망작업중의 수중소음은 양망개시후 시간의 경과에 따라 음압준위가 높아지나 양망의 마무리 단계에서는 오히려 낮아졌다. 2. 본 실험에서 제작한 방성장치로서 정치망어포부내에 방성한 결과, 초기에는 어군이 방성기주변으로 모여드는 반응을 나타내었으나, 약 30분이 경과하면서 이러한 반응은 약화되었다. 그리고 방성시간과 휴지시간의 간격보다는 방성음압에 군락이 더 민감하였다. 3. 일본에서 제작된 음향집어기(Dainy 0-8)로 해상에서 방성시험을 하여 본 결과, 대체로 방성개시후 약 20분에 어군이 모여들고 방성을 멈추면 곧 흩어졌다. 유집된 어군은 선박교통소음의 환경을 많이 받는 것으로 나타났다. 정치망입구 근처의 장등에 음향집어기를 설치하여 방성하였을 경우와 방성하지 않았을 경우에 대한 어획량이 방성하지 않았을 때에 비하여 약 3~5배 많은 것으로 나타났다.

• The Journal of Korean Physical Therapy
• /
• 제26권3호
• /
• pp.191-195
• /
• 2014

Purpose: The purpose of this study is to investigate whether types of sensory-stimuli cues in terms of visual, auditory, and visuoauditory cues can be affected to motor sequential learning in healthy adults, using serial reaction time task. Methods: Twenty four healthy subjects participated in this study, who were randomly allocated into three groups, in terms of visual-stimuli (VS) group, auditory-stimuli (AS) group, and visuoauditory-stimuli (VAS) group. In SRT task, eight Arabic numbers were adopted as presentational stimulus, which were composed of three different types of presentational modules, in terms of visual, auditory, and visuoauditory stimuli. On an experiment, all subjects performed total 3 sessions relevant to each stimulus module with a pause of 10 minutes for training and pre-/post-tests. At the pre- and post-tests, reaction time and accuracy were calculated. Results: In reaction time, significant differences were founded in terms of between-subjects, within-subjects, and interaction effect for group ${\times}$ repeated factor. In accuracy, no significant differences were observed in between-group and interaction effect for groups ${\times}$ repeated factor. However, a significant main effect of within-subjects was observed. In addition, a significant difference was showed in comparison of differences of changes between the pre- and post-test only in the reaction time among three groups. Conclusion: This study suggest that short-term sequential motor training on one day induced behavioral modification, such as speed and accuracy of motor response. In addition, we found that motor training using visual-stimuli cue showed better effect of motor skill acquisition, compared to auditory and visuoauditory-stimuli cues.