• Explosives and Blasting
• /
• v.27 no.1
• /
• pp.47-52
• /
• 2009

Blasting is necessary for excavation processes since more than 70% of korean land is consist of mountains. The vibration and noise accompanied by blasting processes usually bring about public complaints. Blasting patterns are chosen by economical efficiency, stability and construction conveniency. However, there are many alternatives without control to settle the popular complaint. To prevent those alternatives, standard blasting method for design and construction were suggested by MLTM (Ministry of Land, Transport and Maritime Affairs) in 2006. However, standard blasting pattern of MLTM was designed in a lump irrespective of types of rocks. Economical loss may occur by ignoring the characteristics of rocks for the applications to the rocks with low intensity, such as shale, or containing many joint. We deduced some economical progresses by performing test blasting with adjusted drilling spacing and length of burden considering the characteristics of local rock. This paper suggests the start of case studies for different applications. Economic improvement can be expected by applying those results deduced from case studies to design and construction.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.129-142
• /
• 2021

This study aims to identify the perception of New-Hanbok one-piece dresses that female consumers have purchased and to analyze the design preference based on design types and brands. Analysis was conducted on New-Hanbok brand websites, and additional research was carried out through a survey of 402 women in their 20s and older. The survey consisted of 36 questions, which were divided into categories including pattern, color, material, and recognition of the one-piece dress. The research results are as follows. First, the preferred design form of the New-Hanbok one-piece dress was long length, medium fit, princess line, round git, rectangular git, regular width git, V neckline, regular width dongjeong, front closing with a wide overlap of the chest are a, narrow goreum, a skirt part with moderate crease spacing and number of pleats, A-line skirt silhouette, long and narrow sleeves, diagonal shoulder line, and a cuff at the end of each sleeve. Second, the preferred colors of the New-Hanbok one-piece dress were bright, neutral, or light and were predominately monochromatic Third, the preferred fabric conveyed a contemporary atmosphere through its print pattern. The most favored fabric material was cotton. Through this study, more systematic design development research should be carried out focusing on the current situation and identifying problems, thereby improving traditional culture.

• Korean Journal of Organic Agriculture
• /
• v.5 no.1
• /
• pp.67-77
• /
• 1996

The Organic agricultural techinques were investigated through the observations made for 3 years of the actual conditions of a farmer who has been practicing organic agriculture over 21 years. The farmer was a member of the Ichijima-cho Organic Agriculture Association. The Farmer had not performed much of the organic agricultural techinques at the beginning of his farming history. However, he has gradually developed techniques upon the experiences with trial and error. The notable characteristic of his basic organic agriculture was the utilization of a suitable organic fertilizer to make the soil fertile. Crop damages by diseases and insect pests were prevented through a fertile soil, raising of good seedlings, adoption of tolerant varieties and planting at a wide spacing and consequently considering not to use chemical pesticides. Introduction of power weeder for weed control and paddy-upland crop rotation reduced the cost of production for farming. The crop pattern and method of land us such as mix cropping, crop rotation and conversion of paddy field-upland fieldd were appeared to be very important in organic agriculture. The organic agricultural techniques get systematized upon the adaptation the regional ecology and the development of skills of the farmer. The most important point to achieve the success in organic agriculture system is not only by the development of the technical matters but also by the building of healthy relation and understandings between producers and consumers.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.578-583
• /
• 2013

The lighting devices using organic light emitting diodes (OLEDs) are actively researched because of the various advantages such as high power efficiency and 2-dimensitonal lighting emitting. To commercialize those OLED lighting devices, the manufacturing cost must be downed to comparable price with conventional light sources. Here, we demonstrate a reverse gravure-offset or gravure off-set printed metal electrode for the auxiliary electrode for OLED lighting devices. For the fabricated OLED's auxiliary electrode, we used Ag nano-paste and printed metal grid structure with a line width and spacing of several ten and hundred micrometer by using gravure-offset printing. In the end the printing metal grid pattern are successfully achieved by optimization of various experimental conditions such as printing pressure, printing speed and printing delay time.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

• Steel and Composite Structures
• /
• v.18 no.4
• /
• pp.811-831
• /
• 2015

This paper focuses on the strengthening methods used for improving the compression behaviors of perforated box-section walls as provided in the anchorage zones of steel pylons. Rectangular plates containing double-row continuous elliptical holes are investigated by employing the boundary condition of simple supporting on four edges in the out-of-plane direction of plate. Two types of strengthening stiffeners, named flat stiffener (FS) and longitudinal stiffener (LS), are considered. Uniaxial compression tests are first conducted for 18 specimens, of which 5 are unstrengthened plates and 13 are strengthened plates. The mechanical behaviors such as stress concentration, out-of-plane deformation, failure pattern, and elasto-plastic ultimate strength are experimentally investigated. Finite element (FE) models are also developed to predict the ultimate strengths of plates with various dimensions. The results of FE analysis are validated by test data. The influences of non-dimensional parameters including plate aspect ratio, hole spacing, hole width, stiffener slenderness ratio, as well as stiffener thickness on the ultimate strengths are illustrated on the basis of numerous parametric studies. Comparison of strengthening efficiency shows that the continuous longitudinal stiffener is the best strengthening method for such perforated plates. The simplified formulas used for estimating the compression strengths of strengthened plates are finally proposed.

• Journal of the Korea Concrete Institute
• /
• v.12 no.2
• /
• pp.3-11
• /
• 2000

There is a possibility of poor-state concrete filling condition due to segregation and interlocking of aggregate and paste when a high performance concrete is used at reinforced concrete structure without compaction. This study was conducted to evaluate the flexural behavior of high performance concrete beams with design parameters such as c, t and different concrete filling conditions. Different concrete filling conditions were intentionally made such that the first type specimen was soundly cast to obtain the perfect concrete filling condition. Second type was cast in such a way that up to the longitudinal tensile reinforcement from the top, good concrete was filled while poor concrete was poured for the bottom part to simulate the poor strength, workability and unsatisfactory compaction. Third type was cast in such a was that up to the neutral axis of the beam section from the top, good concrete was filled while so did for the bottom part as the second type. The test results were analyzed in terms of load-displacement response, failure pattern, crack width and crack spacing. The test results indicate that have no effect of concrete filling conditions on the yielding strength of structures. But, have a grate influence on the stiffness and ductility of structures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.5
• /
• pp.332-335
• /
• 2005

The three Korean wheat cultivars with different plant types; the erect, the middle and the creeping growth habit, were studied for their utilization to solar radiation, temperature changes on the furrow and to provide optimum planting space for producing the high yield in 2003. The average solar radiation rate was lowest for creeping type ($39.2\%$) and highest for erect type ($75.8\%$) The correlation coefficient between the coverage rate and the solar transmission rate was r = 0.8624 which was significant at $5\%$ level. The relative growth of the plant, tiller rate and leaf size was increased in the erect and the middle type at lower plant density, while no change on plant growth at creeping type regardless of plant density. The increase of leaf size in the lower plant density was due to longer flag and the first leaf than those of other plant types. The temperature on the furrow of growing plants was changed by the canopy. The changes in temperature pattern on the furrow according to plant types during winter season was different compared to the non plant ground. The temperature of the nonplant ground was the lowest due to solar reduction increasing the amount of cool air flowing in the furrow.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.581-586
• /
• 2002

The development of 2-D radiometer is a new technical challenge for space borne remote sensing area. The Y-type antenna array has been proposed as a most efficient configuration because a large alias free FOV and a small-synthesized beam-width can be achieved compared to L-, T-type under the fixed antenna spacing. New configuration of antenna array, which is called sub-Y type configuration, is proposed to obtain a higher angular resolution than the case of Y-type array in the paper. The sub-Y type array is consisted of basic arrays, which are the Y-type array of four antenna elements. To analyze characteristics of the proposed configuration, the synthesized beam pattern is simulated through simulation. The secondary effect of the sub-Y-type is that the reconstructed image is suffered from the alias effect is appeared around the real target. The ghost targets in the reconstructed image can be reduced by the alias suppression algorithm introduced in this paper. In conclusion, the performance evaluation by use of array factor simulation shows more than 37.5% improvement in average for angular resolution and almost similar performance for temperature resolution.

• Tunnel and Underground Space
• /
• v.20 no.3
• /
• pp.183-193
• /
• 2010

The present paper highlights some important fragmentation issues experienced in the limestone quarry blast rounds. In light of these major issues, the paper outlines influence of a few important design parameters, which bear merit to alter the blast performance in order to duly resolve the issues in field scale blast rounds. A comprehensive field based program for evaluation of such blast rounds has also been suggested. The knowledge disseminated in the paper, backed up by sufficient images, is largely based on the experience of the authors, while designing, implementing and evaluating numerous field scale blast rounds in cement grade limestone quarries.