1 |
AASHTO LRFD Bridge design specifications (2013), American Association of State Highway and Transportation Officials, (6th Edition), 2013 interim revisions.
|
2 |
ANSYS 12 [Computer software] (2009), Ansys Inc., Canonsburg, PA, USA.
|
3 |
Azizian, Z.G. and Roberts, T.M. (1983), "Buckling and elasto-plastic collapse of perforated plates", Proceedings of the International Conference on Instability and Plastic Collapse of Steel Structures, London, UK, August.
|
4 |
Cheng, B. and Li, C. (2012), "Buckling behavior of strengthened perforated plates under shear loading", Steel Compos. Struct., Int. J., 13(4), 367-382.
DOI
|
5 |
Cheng, B. and Zhao, J. (2010), "Strengthening of perforated plates under uniaxial compression: Buckling analysis", Thin-Wall. Struct., 48(12), 905-914.
DOI
|
6 |
Cheng, B., Wang, J. and Li, C. (2013a), "Compression behavior of perforated plates in steel tower anchorage zones of cable-stayed bridges", J. Constr. Steel Res., 90, 72-84.
DOI
|
7 |
Cheng, B., Wang, J. and Li, C. (2013b), "Compression tests and numerical analysis of perforated plates containing slotted holes in steel pylons", Thin-Wall. Struct., 67, 129-143.
DOI
|
8 |
El-Sawy, K.M., Nazmy, A.S. and Martini, M.I. (2004), "Elasto-plastic buckling of perforated plates under uniaxial compression", Thin-Wall. Struct., 42(8), 1083-1101.
DOI
|
9 |
Eurocode 3 (2006), Design of steel structures, Steel bridge, British Standards Institution; BS EN 1993-2: 2006.
|
10 |
Li, F., He, Y.T., Fan, C.H., Li, H.P. and Zhang, H.X. (2008), "Investigation on three-dimensional stress concentration of LY12-CZ plate with two equal circular holes under tension", Mater. Sci. Eng., 483-484, 474-476.
DOI
|
11 |
Maiorana, E., Pellegrino, C. and Modena, C. (2008), "Linear buckling analysis of perforated plates subjected to localized symmetrical load", Eng. Struct., 30, 3151-3158.
DOI
|
12 |
Maiorana, E., Pellegrino, C. and Modena, C. (2009), "Non-linear analysis of perforated steel plates subjected to localized symmetrical load", J. Constr. Steel Res., 65, 959-964.
DOI
|
13 |
Narayanan, R. and Rockey, K.C. (1981), "Ultimate load capacity of plate girders with webs containing circular cut-outs", Proceedings of Institution of Civil Engineers, 71(3), 845-862.
DOI
|
14 |
Moen, C.D. and Schafer, B.W. (2009), "Elastic buckling of thin plates with holes in compression or bending", Thin-Wall. Struct., 47(12), 1597-1607.
DOI
|
15 |
Muskhelishvili, N.I. (1963), Some basic problems of the mathematical theory of elasticity, Springer, Groningen, Netherlands.
|
16 |
Narayanan, R. and Chow, F.Y. (1984), "Ultimate capacity of uniaxially compressed perforated plates", Thin-Wall. Struct., 2(3), 241-264.
DOI
|
17 |
Paik, J.K. (2007a), "Ultimate strength of perforated steel plates under edge shear loading", Thin-Wall. Struct., 45(3), 301-306.
DOI
|
18 |
Paik, J.K. (2007b), "Ultimate strength of steel plates with a single circular hole under axial compressive loading along short edges", Ships Offshore Struct., 2(4), 355-360.
DOI
|
19 |
Paik, J.K. (2008), "Ultimate strength of perforated steel plates under combined biaxial compression and edge shear loads", Thin-Wall. Struct., 46(2), 207-213.
DOI
|
20 |
Peterson, R.E. (1974), Stress Concentration Factor, John Wiley and Sons, New York, NY, USA.
|
21 |
Savin, G.N. (1961), Stress Concentration around Holes, Pergamon Press, New York, NY, USA.
|
22 |
Shanmugam, N.E., Thevendran, V. and Tan, Y.H. (1999), "Design formula for axially compressed perforated plates", Thin-Wall. Struct., 34(1), 1-20.
DOI
|
23 |
Yu, P.S., Guo, W.L., She, C.M. and Zhao, J.H. (2008), "The influence of Poisson's ratio on thickness-dependent stress concentration at elliptic holes in elastic plates", Int. J. Fatigue, 30(1), 165-171.
DOI
|
24 |
She, C.M. and Guo, W.L. (2007), "Three-dimensional stress concentrations at elliptic holes in elastic isotropic plates subjected to tensile stress", Int. J. Fatigue, 29(2), 330-335.
DOI
|
25 |
Yang, Z., Kim, C.B., Cho, C. and Beom, H.G. (2008), "The concentration of stress and strain in finite thickness elastic plate containing a circular hole", Int. J. Solid. Struct., 45(3-4), 713-731.
DOI
|