• Journal of Advanced Marine Engineering and Technology
• /
• 제4권1호
• /
• pp.23-31
• /
• 1980

The fluid static pressure has been generally measured by means of a small hole leading to a measuring instrument. In case of viscoelastic fluids, however, it has been shown experimentally that a systematic error exists in measuring the static pressure by means of the small hole becuase viscoelasitc fluids have many properties that can not be observed in Newtonian fluids. In this paper, in order to examine the mechanism of the errors in measuring the static pressure of viscoelasitc fluids, flow patterns in the vicinity of static pressure measuring hole were photographically taken and observed graphically. The experiments to take photographs of flow patterns were performed by a parallel plate channel with the steady two-dimensional shear flow of viscoelastic fluids. Results of the experiment are classified as following three regions; (1) Arched symmetrical flow pattern region. (2) Asymmetrical flow pattern region. (3) Rectilinear symmetricl flow pattern region.

• 동의생리병리학회지
• /
• 제16권3호
• /
• pp.528-531
• /
• 2002

In Traditional Oriental Medicine, there has been a growing needs for computerized diagnosis expert system, which can implement pre-diagnosis and correct the errors of practitioners. Therefore, we developed the expert system (KHU-PIPE : Kyung Hee University - Pattern Identification and Prescription Expert) for diagnosis and treatment. It has three characteristics as following. First. this system has the knowledge base which modified the standardized data designed by Chinese government during 1980s. Second, it provides the objective and standardized diagnosis as the results of pattern identification and their appropriate prescriptions for treatment. Third, it is applied to both LAN system and internet. Furthermore, it can be used as an educational methods for the practices of pattern identification and prescription, and provide the objective criteria for clinical studies and promote the Traditional Oriental Medicine as an evidence-based medicine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.29-31
• /
• 1993

This paper presents Neural Network(NN) approach to short-term load forecasting. Input to the NN are past loads and the output is the predicted load for a given day. The NN is used to learn the relationship among past, current and future temperature and loads. Three different cases are presented. Case 1 divides into weekday and weekendday load pattern. Case 2 forcasts 24-hour ahead load. Case 3 searchs for the same load pattern as present load pattern in past load pattern. From result of forecasting, an average absolute percentage errors of case 1 shows 2.0%. That of case 2 shows 2.2, and That of case 3 shows 1.6%.

• 말소리와 음성과학
• /
• 제4권2호
• /
• pp.21-31
• /
• 2012

The purpose of this study is to find the influence of Chinese falling-rising tone on the pitch pattern of corresponding partly-different-form-same-meaning Sino-Korean words delivered by Chinese learners of Korean and to examine how the falling-rising tone of corresponding Chinese words affects the pitch patterns of Sino-Korean words. The scope of this research is limited to Chinese learners of Korean, especially on two groups of Sino-Korean words - AB:CB type and AB:AC type that the are second-most frequently occuring different-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. Learners' pitch patterns were recorded and analyzed using software and compared with the tone of corresponding Chinese words. Experimental results showed that AB:CB type Sino-Korean words were not affected by Chinese 'falling-rising tone - high and level tone'. As well as AB:CB type, experimental results showed there were no significant influence on the pitch pattern of AB:AC type Sino-Korean words by Chinese falling-rising tone. But it was clear that Chinese learners' made pitch errors on both AB:CB type and AB:AC type Sino-Korean words. In conclusion, the Chinese learners' pitch patterns of partly-different-form-same-meaning Sino-Korean words are different from Korean native speakers', but their pitch errors cannot be attributed to Chinese falling-rising tone.

• 한국운동역학회지
• /
• 제28권2호
• /
• pp.127-134
• /
• 2018

Objective: In a statistical linear model estimating the center of rotation of a human hip joint, which is the parameter related to the mean of response vectors, assumptions of homoscedasticity and independence of position vectors measured repeatedly over time in the model result in an inefficient parameter. We, therefore, should take into account the variance-covariance structure of longitudinal responses. The purpose of this study was to estimate the efficient center of rotation vector of the hip joint by using covariance pattern models. Method: The covariance pattern models are used to model various kinds of covariance matrices of error vectors to take into account longitudinal data. The data acquired from functional motions to estimate hip joint center were applied to the models. Results: The results showed that the data were better fitted using various covariance pattern models than the general linear model assuming homoscedasticity and independence. Conclusion: The estimated joint centers of the covariance pattern models showed slight differences from those of the general linear model. The estimated standard errors of the joint center for covariance pattern models showed a large difference with those of the general linear model.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.145-152
• /
• 1999

This paper presents the principle and experimental results of a non-contact surface roughness measurement by means of screen projected pattern of lase beam reflected from a polished surface. In the reflected laser beam pattern especially from a fine surface like ground or polished one, light intensity varies from the center fo the image to its boundary as the Gaussian distribution. The standard deviation of a light intensity distribution is assumed to be a good non-contact estimator for measuring the surface roughnes, because the light reflectivity is known to be well related with the surface roughness. This method doesn't need to discriminate between the specularly reflected light and the diffusely reflected one, whereas the scattered laser intensity method must do. Nor it needs to adjust the change of light intensity caused by environmental lights or specimen materials. Reflected laser beam pattern narrowly spreads out in the vertical direction to tiny scratches on the polished surface due to abrasives. The deeper the scratch the more the dispersion, which means the rougher surface. The standard deviation of the pattern is nearly in proportion to the surface roughness. Measurement errors by this method are shown to be below 10 percent compared with those obtained by a common contact method. The inclination of measuring unit from the normal axis causes the measurement errors up to 10 percent for an angle of 4 degree. Therefore the proposed method can be used as an on-the-machine quick roughness estimator within 10 percent measurement error.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.77-84
• /
• 2013

In this paper, we review two-dimensional measuring methods referring to target patterns. The patterns consist of two linearly-repeated patterns or is designed repeatedly in two-dimension. The repeated properties are reflectivity, refractivity, air-gapping distance, capacitance, magnetic reluctance, electrical resistance and sloping gradient, etc. However, the optical methods are generally used for high speed processing and density, and their encoding principles are treated here. In case of two-dimensional pattern, as there is not inherently error between single units encoding the pattern except for the metrology frame errors, the end-effector position of an object accompanying the pattern can be measured with respect of the global frame without via error. Therefore, it is regarded as a substitute for laser interferometer with severe environmental constraints and has been applied to the high-accurate planar actuator.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권2호
• /
• pp.131-139
• /
• 2007

본 논문에서는 띄어쓰기 오류와 철자 오류를 동시에 교정 가능한 전처리기를 제안한다. 제시된 알고리즘은 기존의 전처리기 알고리즘이 각 오류를 따로 해결하는 데에서 오는 한계를 극복하고, 기존의 noisy-channel model을 확장하여 대화체의 띄어쓰기 오류와 철자 오류를 동시에 효과적으로 교정할 수 있다. N-gram과 자소변환확률 등의 통계적 방법과 어절변환패턴 사전을 이용하여 최대한 사전을 적게 이용하면서도 효과적으로 교정 후보들을 생성할 수 있다. 실험을 통해 현재 단계에서는 만족할 만한 성능을 얻지는 못하였지만 오류 분석을 통하여 이와 같은 방법론이 실제로 효용성이 있음을 알 수 있었고 앞으로 더 많은 개선을 통해 일상적인 대화체 문장에 대해서 효과적인 전처리기로서 기능할 수 있을 것으로 기대된다.

• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.624-634
• /
• 2011

The purpose of this study is to develop the pattern of safety clothes used at flat or mountainous areas and to identify the pattern of safety clothes by conducting experimental evaluation of virtual wear. Three subjects were selected, based on fire fighters' physical constitution. A prototype design for safety clothing was determined after in-depth interviewing of professionals and surveying of Forest service staff and related agency. Wearing test should be carried out in the order of pattern making, virtual and real wearing evaluation. For data analysis, technical statistical values should be obtained by using body measurements of subject, frequency analysis and T-test. The jacket is designed to have a front extension and the entire length of clothing enough for wearer to put on it over ordinary shirts or sweater. The collar of jacket is of round type. Cyber reality enables to identify the movement and activity of virtual fitting model and to find out errors or problems in safety clothing prior to on-the-spot wear test, thus raising the precision level of pattern. There was significant difference between real and virtual fit preference. The results show that the virtual try-on system need the development of a specific style.

• 한국전자파학회논문지
• /
• 제28권8호
• /
• pp.603-609
• /
• 2017

전개형 솔리드 안테나에서 패널 전개 시 발생할 수 있는 구조적인 오차가 안테나 성능에 미치는 영향을 분석하였다. 위성에서 활용되는 전개형 안테나는 지상에서 접힌 상태로 발사되어 우주 공간에서 펼쳐지며, 전개 시 발생할 수 있는 오차의 형태를 분류하여 각각의 경우에 성능에 미치는 영향을 분석하였다. 패널 하나에만 전개 오차가 있을 때는 불완전 전개 패널에 해당하는 쪽에서 안테나 성능의 열화가 발생하였다. 패널 전개 오차가 코사인 함수의 형태로 분포한다고 가정하여 오차의 크기와 오차 형태에 따른 영향을 계산하고 분석하였다. 안테나 패널 오차가 균일한 경우에는 오차크기에 비례하여 이득이 감소하고, 패턴은 대칭이다. 코사인 1 또는 3주기의 패널 오차에 대해서는 주엽의 기울어짐이 나타나며, 코사인 2 또는 4주기의 패널 오차에 대해서는 패턴은 대칭이며, 이득이 감소한다.