• Explosives and Blasting
• /
• v.41 no.3
• /
• pp.62-72
• /
• 2023

The aging of plant structures due to industrialization in the 1970s has increased the demand for blast demolition. While blasting can reduce exposure to environmental pollution by shortening the demolition period, improper blasting design and construction plans pose significant safety risks. Thus, it is vital to consider optimal blasting demolition conditions and other factors through collapse behavior simulation. This study utilizes a 3-D combined finite-discrete element method (FDEM) code-based 3-D DFPA to simulate the collapse of a chimney structure in a thermal power plant in Seocheon, South Korea. The collapse behavior from the numerical simulation is compared to the actual structure collapse, and the numerical simulation result presents good agreement with the actual building demolition. Additionally, various numerical simulations have been conducted on the chimney models to analyze the impact of the duct size in the pre-weakening area. The no-duct, duct, and double-area duct models were compared in terms of crack pattern and history of Z-axis displacement. The findings show that the elapse-time for demolition decreases as the area of the duct increases, causing collapse to occur quickly by increasing the load-bearing area.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.345-354
• /
• 2024

In this paper, we propose a triple band WLAN antenna for Wi-Fi 6E band with DGS. The proposed antenna has the characteristics required frequency band and bandwidth by considering the interconnection of two strip lines and three areas on the ground place. The total substrate size is 31 mm (W) × 50 mm (L), thickness (h) 1.6 mm, and the dielectric constant is 4.4, which is made of 22 mm (W₆ + W₄ + W₅) × 43mm (L₁ + L₂ + L₃ + L₅) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 340 MHz (1.465 to 1.805 GHz) for 900 MHz band, 480 MHz (2.155 to 2.635 GHz) for 2.4 GHz band and 1950 MHz (4.975 to 6.925 GHz) for 5.0/6.0 GHz band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.

• Tunnel and Underground Space
• /
• v.34 no.3
• /
• pp.231-247
• /
• 2024

In the field of high-level radioactive waste disposal targeting deep rock environments, hydraulic characteristic information serves as the most important key factor in selecting relevant disposal sites, detailed design of disposal facilities, derivation of optimal construction plans, and safety evaluation during operation. Since various rock types are mixed and distributed in a small area in Korea, it is important to conduct preliminary work to analyze the hydrogeological characteristics of rock aquifers for various rock types and compile the resulting data into a database. In this paper, we obtained hydraulic conductivity data, which is the most representative field hydraulic characteristic of a high-depth volcanic bedrock aquifer, and also analyzed and evaluated the field data. To acquire field data, we used a high-performance hydraulic testing system developed in-house and applied standardized test methods and investigation procedures. In the process of hydraulic characteristic data analysis, hydraulic conductivity values were obtained for each depth, and the pattern of groundwater flow through permeable rock joints located in the test section was also evaluated. It is expected that the series of data acquisition methods, procedures, and analysis results proposed in this report can be used to build a database of hydraulic characteristics data for high-depth rock aquifers in Korea. In addition, it is expected that it will play a role in improving technical know-how to be applied to research on hydraulic characteristic according to various bedrock types in the future.

• IMMUNE NETWORK
• /
• v.21 no.5
• /
• pp.33.1-33.19
• /
• 2021

IL-1β plays critical roles in the priming and effector phases of immune responses such as the differentiation, commitment, and memory formation of T cells. In this context, several reports have suggested that the IL-1β signal is crucial for CTL-mediated immune responses to viral infections and tumors. However, little is known regarding whether IL-1β acts directly on CD8⁺ T cells and what the molecular mechanisms underlying expression of IL-1 receptors (IL-1Rs) on CD8⁺ T cells and features of IL-1R⁺ CD8⁺ T cells are. Here, we provide evidence that the expression of IL-1R type I (IL-1RI), the functional receptor of IL-1β, is preferentially induced by IL-21 on TCR-stimulated CD8⁺ T cells. Further, IL-1β enhances the effector function of CD8⁺ T cells expressing IL-21-induced IL-1RI by increasing cytokine production and release of cytotoxic granules containing granzyme B. The IL-21-IL-1RI-IL-1β axis is involved in an augmented effector function through regulation of transcription factors BATF, Blimp-1, and IRF4. Moreover, this axis confers a unique effector function to CD8⁺ T cells compared to conventional type 1 cytotoxic T cells differentiated with IL-12. Chemical inhibitor and immunoprecipitation assay demonstrated that IL-21 induces a unique pattern of STAT activation with the formation of both STAT1:STAT3 and STAT3:STAT5 heterodimers, which are critical for the induction of IL-1RI on TCR-stimulated CD8⁺ T cells. Taken together, we propose that induction of a novel subset of IL-1RI-expressing CD8⁺ T cells by IL-21 may be beneficial to the protective immune response against viral infections and is therefore important to consider for vaccine design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.378-385
• /
• 2006

To release fashion trends in an efficient way, many of the apparel business and fashion educational institutes in land adopt fashion shows employing fashion models. Modeling rather than flat pattern making realizes the majority of the complicated design works for the fashion shows. However, for the different measurements between the dress form and the real human model, problems often occur during the modeling and fitting processes. Researches on the standard dress form development representing professional fashion models' features are therefore in urgent need to enable the related apparel business and fashion institutes to make appropriate use of the dress form in their jobs. The study has been conducted as a preliminary study using a questionnaire method ultimately to develop the female dress form. A questionnaire in the research aimed at an investigation into the actual conditions of and satisfaction with the usage and the body measurements of existed dress forms. Approximately 30 fashion-related educational institutes and 10 apparel companies responded to the survey. Data derived from the survey was analyzed using SPSS version 10.1, the statistics tool. The results throughout the research were discussed in terms of largely three categories that are; (1) the general conditions of the usage of the dress form to prepare fashion shows: e.g. the frequency of holding the fashion show in an annual term, the proportion of professional and amateur models employed for the fashion show, the methods to construct garments, types and number of dress forms utilized and etc.; (2) factors considered to purchase the dress form e.g. its functionality, shapes, sizes, duration, price, A/S condition and etc.; and(3) satisfaction with the similarity between the dress form and the human body in the relation to the body measurements. Measurements in length wise, front and back waist lengths, neck to bust point on the dress forms were apparently differed from the ones of the actual body. In particular, differed torso length measurements cause the problem to have to alter the whole silhouette, consequently, the resultant patterns as well. In girth measurements, in order of bust and waist girths, the satisfaction was low.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.5-9
• /
• 2014

Purpose - The purpose of this study was to compare and contrast the applicability and effectiveness of both teukyakmeip contracts of Korea and consignment contracts of the United State to demonstrate the effectiveness and practicability of teukyakmeip in Korea. These are popular contract agreements between large retailers and their suppliers and vendors. In recent years, teukyakmeip was critically examined and scrutinized by the politicians, the media, and the public of Korea. Consequently, this paper focusesheavily on identifying and analyzing different types of contract agreements between large retailers and their suppliers that currently exist in Korea and compares and contrasts those analyzed contract agreements with teukyakmeip. The article also comparesand contrasts teukyakmeip with the consignment agreements of the United States to identify similarities and differences. Research design, data, and methodology - This study is a descriptive study and has used personal interviews to collect and analyze the data. This study also fits the definition of the case study wherein it is entirely focused on investigating a real-life event: analyzing and examining contract agreements in the distribution industry. Both randomly selected management and vendor representatives from the three major department stores, Lotte, Hyundai, and Shinsegae, in Korea were interviewed between July and September 2013. The analysis of the consignment agreement was conducted based on existing secondary data. Results - Although the evidence of the abuse of teukyakmeip and consignment by large retailers from both countries clearly exists, the findings suggestthat both contract agreements would remain as the most relevant and effective legal contracts between large retailers and their suppliers. Based on the comparisonanalysis of teukyakmeip and consignment, both contracts indicated that suppliers are fully responsible for inventory and inventory management. If sales person is necessary for promoting special product, then suppliers are responsible for providing a sales person and their wages under both contracts. However, American department stores, those located outside urban area, tend to use their own employees to perform special product and sales promotion. The retailersare fully responsible for any interior or floor design or redesign of the retail store to accommodate the products from vendors under consignment; however, both suppliers and retailers share the cost of designing and redesigning the interior to accommodate vendors'products under teukyakmeip. Suppliers are responsible for pricing and supplying the quantity of the products under both agreements. Both contracts allow special sales commission as long as vendors agreed. Vendors use this special commissionto introduce their new products or apply market penetration strategy. Conclusions -The findings of this study showed the changing pattern of contract agreements between large retailers and their suppliers from both countries. Furthermore, this study evidently generated policy implications of teukyakmeip which recently became the major social issue in Korea and attracted many policymakers to gain political points by criticizing the teukyakmeip system and the large retailers. The findings of the study would be valuable to policy makers in making appropriate decisions and to large retailers and vendors in making beneficial agreements. The major implication of this study is that teukyakmeip and consignment agreements include very similar or almost identical characteristics, and they are popular among department stores and suppliers. The issue of abolishing teukyakmeip in Korea needs to be examined cautiously because teukyakmeip is the best one available at the moment, and the study suggests that no one benefits from abolishing this system.

• Journal of Home Health Care Nursing
• /
• v.4
• /
• pp.5-22
• /
• 1997

The purpose of the study was to development an information delivery system for the home nursing service, to demonstrate and to evaluate the efficiency of it. The period of research conduct was from September 1996 to August 31, 1997. At the 1st stage to achieve the purpose, Firstly Assessment tool for the patients with cerebral vascular disease who have the first priority of HNS among the patients with various health problems at home was developed through literature review. Secondly, after identification of patient nursing problem by the home care nurse with the assessment tool, the patient's classification system developed by Park (1988) that was 128 nursing activities under 6 categories was used to identify the home care nurse's activities of the patient with CAV at home. The research team had several workshops with 5 clinical nurse experts to refine it. At last 110 nursing activities under 11 categories for the patients with CVA were derived. At the second stage, algorithms were developed to connect 110 nursing activities with the patient nursing problems identified by assessment tool. The computerizing process of the algorithms is as follows: These algorithms are realized with the computer program by use of the software engineering technique. The development is made by the prototyping method, which is the requirement analysis of the software specifications. The basic features of the usability, compatibility, adaptability and maintainability are taken into consideration. Particular emphasis is given to the efficient construction of the database. To enhance the database efficiency and to establish the structural cohesion, the data field is categorized with the weight of relevance to the particular disease. This approach permits the easy adaptability when numerous diseases are applied in the future. In paralleled with this, the expandability and maintainability is stressed through out the program development, which leads to the modular concept. However since the disease to be applied is increased in number as the project progress and since they are interrelated and coupled each other, the expand ability as well as maintainability should be considered with a big priority. Furthermore, since the system is to be synthesized with other medical systems in the future, these properties are very important. The prototype developed in this project is to be evaluated through the stage of system testing. There are various evaluation metrics such as cohesion, coupling and adaptability so on. But unfortunately, direct measurement of these metrics are very difficult, and accordingly, analytical and quantitative evaluations are almost impossible. Therefore, instead of the analytical evaluation, the experimental evaluation is to be applied through the test run by various users. This system testing will provide the viewpoint analysis of the user's level, and the detail and additional requirement specifications arising from user's real situation will be feedback into the system modeling. Also. the degree of freedom of the input and output will be improved, and the hardware limitation will be investigated. Upon the refining, the prototype system will be used as a design template. and will be used to develop the more extensive system. In detail. the relevant modules will be developed for the various diseases, and the module will be integrated by the macroscopic design process focusing on the inter modularity, generality of the database. and compatibility with other systems. The Home care Evaluation System is comprised of three main modules of : (1) General information on a patient, (2) General health status of a patient, and (3) Cerebrovascular disease patient. The general health status module has five sub modules of physical measurement, vitality, nursing, pharmaceutical description and emotional/cognition ability. The CVA patient module is divided into ten sub modules such as subjective sense, consciousness, memory and language pattern so on. The typical sub modules are described in appendix 3.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.46-52
• /
• 2009

Statement of problem: Recently, titanium has become popular as superstructure material in implant dentistry because titanium superstructure can be easily milled by means of computer-aided design and manufacture (CAD/CAM) technique. But retention form such as nail head or bead cannot be cut as a result of technical limitation of CAD/CAM milling and bond strength between titanium and porcelain is not as strong as that of conventional gold or metal alloy. Purpose: The objective of this study was to evaluate the shear bond strength of three different materials: heat curing resin, composite resin, porcelain which were bonded to grade II commercially pure Titanium (CP-Ti). Material and methods: Thirty seven CP-Ti discs with 9 mm diameter, 10 mm height were divided into three groups and were bonded with heat curing resin (Lucitone 199), indirect composite resin (Sinfony), and porcelain (Triceram) which were mounted in a former with 7 mm diameter and 1 mm height. Samples were thermocycled for 1000 cycles at between $5-55^{\circ}C$. Shear bond strength (MPa) was measured with Instron Universal Testing Machine with cross head speed of 1 mm/min. The failure pattern was observed at the fractured surface and divided into adhesive, cohesive, and combination failure. The data were analyzed by one-way ANOVA and Scheffe's multiple range test (${\alpha}=0.05$). Results: Lucitone 199 ($17.82{\pm}5.13\;MPa$) showed the highest shear bond strength, followed by Triceram ($12.97{\pm}2.11\;MPa$), and Sinfony ($6.00{\pm}1.31\;MPa$). Most of the failure patterns in Lucitone 199 and Sinfony group were adhesive failure, whereas those in Triceram group were combination failure. Conclusion: Heat curing resin formed the strongest bond to titanium which is used as a CAD/CAM milling block. But the bond strength is still low compared with the bond utilizing mechanical interlocking and there are many adhesive failures which suggest that more studies to enhance bond strength are needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.120-127
• /
• 2015

Purpose: The aim was to investigate the effect of implant thread designs on the stress dissipation of the implant. Materials and methods: The threads evaluated in this study included the V-shaped, buttress, reverse buttress, and square-shaped threads, which were of the same size (depth). Building four different implant/bone complexes each consisting of an implant with one of the 4 different threads on its cylindrical body ($4.1mm{\times}10mm$), a force of 100 N was applied onto the top of implant abutment at $30^{\circ}$ with the implant axis. In order to simulate different osseointegration stages at the implant/bone interfaces, a nonlinear contact condition was used to simulate immature osseointegration and a bonding condition for mature osseointegration states. Results: Stress distribution pattern around the implant differed depending on the osseointegration states. Stress levels as well as the differences in the stress between the analysis models (with different threads) were higher in the case of the immature osseointegration state. Both the stress levels and the differences between analysis models became lower at the completely osseointegrated state. Stress dissipation characteristics of the V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration. These results indicated that implant thread design may have biomechanical impact on the implant bed bone until the osseointegration process has been finished. Conclusion: The stress dissipation characteristics of V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.1-9
• /
• 2011

This study concerns the Baekje Traditional Garden, one of the open spaces in the Lotte Resort in the Baekje Historical Reappearance Complex, which is part of the comprehensive plan for specific areas in the Baekje cultural area. The Baekje Traditional Garden has historic value, and its excellent garden style influenced the ancient Japanese gardens. This study dealt with three issues: (1) The context in which Lotte Buyeo Resort accepted the Baekje Traditional Garden, particularly the background and process of such; (2) The original form of the Baekje Traditional Garden; and (3) How the Baekje Traditional Garden should be represented in the open space of the resort. Representation is accomplished in two ways: using the structure of the original garden and in the borrowing of elements. For representation using the structure of the original garden, Imrugak was used as the main entrance space, and Wolsunjung was represented from the Ganbuklee remains. In the rear garden are wave watercourses and other garden facilities of the Wanggungri site in Iksan. Borrowing of elements, on the other hand, was accomplished in the plant plan and detailed development. In addition, mountaintops (three mountains and five mountain summits), a clean stream between mountains, and a pine forest are visualized in the garden. This is the representative landscape of the Taoist hermit world that appeared in the Baekje Gilt Bronze Incense Burner and Landscape pattern. The significance of this study is twofold. First, the Baekje Traditional Garden is a fresh trail because there has been no previous research concerning it. Second, while past research concerning traditional spaces focused on the results of representation, this study focused on the process of representation. This means that this research work tried to extend the study concerning the representation of traditional spaces from the conceptual to the practical approach. This study, however, also has its limitations. The authenticity of the representation suggested in this study may be questioned later because efforts have been made to preserve the original Baekje Traditional Garden. In addition, this study should seek a balance between authenticity on one hand and amusement and diversity of experience on the other, because the site is a resort.