• Title/Summary/Keyword: Pattern design

Search Result 5,544, Processing Time 0.038 seconds

Design and Fabrication of WLAN / UWB Antenna for Marine High Speed Communication Network System (해양 초고속 통신망 시스템을 위한 WLAN(Wireless Local Area Network) / UWB(Ultra Wide Band)용 안테나 설계 및 제작)

  • Hong, Yong-Pyo;Kang, Sung-Woon;Kim, Kab-Ki
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.24 no.4
    • /
    • pp.489-495
    • /
    • 2018
  • In this paper, we designed and fabricated WLAN / UWB communication antennas operating at 3.3 [GHz] and 5 [GHz] bands in order to effectively use the high-speed communication network system that improved antenna miniaturization, gain and radiation pattern. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. Simulation results show that the return loss is -14.053 [dB] at 3.3 [GHz] and -13.118 [dB] at 5 [GHz]. The gain showed a value of 2.479 [dBi] at 3.3 [GHz] and a value of 3.317 [dBi] at 5 [GHz]. After optimizing it with the CST Microwave Studio 2014 program, which can be 3D-designed, Based on these results, we investigated the performance of antennas by measuring their characteristics. In recent years, WLAN, which is a variety of wireless technologies that are continuously developing, and UWB, which is a communication technology which is increasing in frequency band due to an increase in demand of the technology users, is used for a high speed wireless communication system. Communication seems to be possible.

A Comparative Study on the Characteristics of Friction with/without shoes by Analyzing Bio-signals during walking (보행 시 생체신호분석을 통한 신발 착용 유무에 따른 마찰 특성 비교)

  • Oh, Seong-geun;Kim, Jin-Hyun
    • Journal of Convergence for Information Technology
    • /
    • v.8 no.6
    • /
    • pp.59-66
    • /
    • 2018
  • The utilized coefficient of friction (UCOF) as a ratio of the shear force to the normal force on the ground during walking is used to identify the point at which slip is likely to occur. Shoe walking will change the utilized coefficient of friction by shoe design such as sole thickness and hardness, heel shape, and outsole pattern. In this study, subjects are 21 adults (10 female, 11 male, age: $25.2{\pm}2.3yrs$, height: $165.6{\pm}7.2cm$), analysis variables were walking speed, GRF, when the UCOF is maximal, and Tangent of CoP-CoM angle, and correlation analysis with the utilized friction coefficient (UCOF). As a result, First, for the shod walking the time point which UCOF is maximum about heel strike was faster and the magnitude was larger than for barefoot walking. Second, the correlation between the tangent of CoP-CoM and UCOF of right foot was higher at the left heel striking point (UCOF2_h) which occurred in the post propulsion phase than at the right heel striking point (UCOF1_h). This suggests that the right foot UCOF is related to the braking phase of left foot( which is the propulsion phase of right foot) rather than the braking phase of right foot.

A Flat Staging Studies in the Animation "Song of the Sea(2014)" (애니메이션 "바다의 노래(2014)"에 나타난 평면적 스테이징 연구)

  • Kim, Soong-Hyun;Lee, Tae-Hoon
    • Journal of Digital Convergence
    • /
    • v.17 no.6
    • /
    • pp.373-380
    • /
    • 2019
  • In this study, I examined the visual elements for narrative structure and the symbols, scene components and visual styles in the images through analyze the flat staging in Tomm Moore's animated feature film, . As a research method, I figure out the general theories about staging and analyze extracted scenes which revealed flat staging in the , then summarize and clarify the flat staging production elements and features of Tomm Moore. As a result, in , the composition of the screen using the basic shapes, the screen composition containing the spiral which is symbol of the Celtic traditional pattern, the stable and flat frame expression through the balanced screen composition, expression of spatial sensation using perspective, appearance of the period by using the inverted perspective, and composition that can emphasize the flat formability are appeared as a characteristic. Through this, the two-dimensional planarity was maximized to convey the feeling of appreciating the illustrations of fairy tales. Tomm Moore, who produced animation based on folk tales in order to inherit the traditional culture of Ireland, has been attracting worldwide attention because of its flat staging to help narrative, enhancing the original expression and performance of animation. I hope that this study will be used as basic data for industry workers and researchers who make unique and excellent animated feature film.

A Study on the Long-term Settlement Characteristics of Thick Clay Deposits Using Field Monitoring (대심도 연약지반의 현장계측을 이용한 장기침하거동특성 분석에 관한 연구)

  • Kwon, Hyun-Wook;Im, Jong-Chul;Chang, Ji-Gun;Kang, Sang-Kyun
    • Journal of the Korean Geosynthetics Society
    • /
    • v.17 no.4
    • /
    • pp.21-28
    • /
    • 2018
  • Despite a number of studies on consolidation behavior that have been carried out in the Nakdong River estuary in Busan, these are focused on the prediction of final settlement during ground improvement process, and there is almost no research on the long-term settlement occurring after that. For the practical study on the long-term settlement, the field monitored settlement data that measured over 10 years in the Busan new port facilities area were used, and the final settlement and predicted time-settlement line were constituted by hyperbolic function. As a result, the measured settlements depend on the thickness of clayey soils, and the pattern were similar to each other and good agreement with the predicted time-settlement line using hyperbolic method. Also, the settlement in the lower non-improved layer occupied 62-76% of total settlement. Information about above results would be quite helpful to understand the long-term settlement behaviors as well as the non-improved layer's settlement is more careful consideration needed at design phase.

"Post-Decompressive Neuropathy": New-Onset Post-Laminectomy Lower Extremity Neuropathic Pain Different from the Preoperative Complaint

  • Boakye, Lorraine A.T.;Fourman, Mitchell S.;Spina, Nicholas T.;Laudermilch, Dann;Lee, Joon Y.
    • Asian Spine Journal
    • /
    • v.12 no.6
    • /
    • pp.1043-1052
    • /
    • 2018
  • Study Design: Level III retrospective cross-sectional study. Purpose: To define and characterize the presentation, symptom duration, and patient/surgical risk factors associated with 'post-decompressive neuropathy (PDN).' Overview of Literature: PDN is characterized by lower extremity radicular pain that is 'different' from pre-surgical radiculopathy or claudication pain. Although it is a common constellation of postoperative symptoms, PDN is incompletely characterized and poorly understood. We hypothesize that PDN is caused by an intraoperative neuropraxic event and may develop early (within 30 days following the procedure) or late (after 30 days following the procedure) within the postoperative period. Methods: Patients who consented to undergo lumbar laminectomy with or without an instrumented fusion for degenerative lumbar spine disease were followed up prospectively from July 2013 to December 2014. Relevant data were extracted from the charts of the eligible patients. Patient demographics and surgical factors were identified. Patients completed postoperative questionnaires 3 weeks, 3 months, 6 months, and 1 year postoperatively. Questions were designed to characterize the postoperative pain that differed from preoperative pain. A diagnosis of PDN was established if the patient exhibited the following characteristics: pain different from preoperative pain, leg pain worse than back pain, a non-dermatomal pain pattern, and nocturnal pain that often disrupted sleep. A Visual Analog Scale was used to monitor the pain, and patients documented the effectiveness of the prescribed pain management modalities. Patients for whom more than one follow-up survey was missed were excluded from analysis. Results: Of the 164 eligible patients, 118 (72.0%) completed at least one follow-up survey at each time interval. Of these eligible patients, 91 (77.1%) described symptoms consistent with PDN. Additionally, 75 patients (82.4%) described early-onset symptoms, whereas 16 reported symptoms consistent with late-onset PDN. Significantly more female patients reported PDN symptoms (87% vs. 69%, p=0.03). Patients with both early and late development of PDN described their leg pain as an intermittent, constant, burning, sharp/stabbing, or dull ache. Early PDN was categorized more commonly as a dull ache than late-onset PDN (60% vs. 31%, p=0.052); however, the difference did not reach statistical significance. Opioids were significantly more effective for patients with early-onset PDN than for those with late-onset PDN (85% vs. 44%, p=0.001). Gabapentin was most commonly prescribed to patients who cited no resolution of symptoms (70% vs. 31%, p=0.003). Time to symptom resolution ranged from within 1 month to 1 year. Patients' symptoms were considered unresolved if symptoms persisted for more than 1 year postoperatively. In total, 81% of the patients with early-onset PDN reported complete symptom resolution 1 year postoperatively compared with 63% of patients with late-onset PDN (p=0.11). Conclusions: PDN is a discrete postoperative pain phenomenon that occurred in 77% of the patients who underwent lumbar laminectomy with or without instrumented fusion. Attention must be paid to the constellation and natural history of symptoms unique to PDN to effectively manage a self-limiting postoperative issue.

Preliminary Study on Usual Cold or Heat as a Risk Factor for Hypertension in an University Faculty (일개 대학 교직원 집단에서 고혈압의 위험요인으로서의 평소 한열 예비 연구)

  • Jung, Kyung Sik;Kim, Yun Young;Baek, Young Hwa;Jang, Eunsu
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.33 no.4
    • /
    • pp.226-232
    • /
    • 2019
  • This study was aimed to reveal that the usual cold or heat state was associated with hypertension and could be a risk. We emailed educational personnel in D university to join this study and 182 subjects participated in from March to December in 2016. The usual cold or heat diagnosis was conducted by two experts who had over 10 years expertise. The blood pressure was measured from the subjected after 10 minute rest with Jawon medical device. The hypertension was diagnosed by the guide of the Seventh Report of the Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure. The frequency analysis was used in general characteristics, Pearson's Correlation Coefficient analysis was conducted in among continuous variables, and chi-square test was also used between hypertension and cold or heat group. Logistic regression was analyzed to generate the odds ratios (ORs) and 95% confidence interval (CI) for hypertension. The cold score was suggested to have negative association with Body mass Index (BMI, -.374, p<.001), systolic blood pressure (-.333, p<.001), and diastolic pressure (-.261, p<.001). The heat score was analyzed to have positive association with Body mass Index (.413, p<.001), systolic blood pressure (.249, p<.001), and diastolic pressure (.156, p<.001). The distribution of the cold group (35.1%) and non-cold group (64.9%) in hypertension was significantly different (p=0.18). The distribution of the heat group (62.2%) and non-heat group (37.8%) was significantly different (p=0.27). The usual cold was associated with decreased ORs (ORs 0.405, 95% CI=0.191-0.857), and usual heat was associated with increased ORs (ORs 2.327, 95% CI=1.108-4.888). However, after adjusting body mass index, sex, and smoking, the association was not significantly different. It is possible that usual cold or heat associate with hypertension. Further study is needed to show that usual heat may be a independent risk factor for hypertension through follow up design.

An Examination on the Appearance Process of Ammaksae(concave end roof tiles) of the Baekje Period (백제 암막새의 출현과정에 관한 검토)

  • Shim, Sang-Yuck
    • Korean Journal of Heritage: History & Science
    • /
    • v.38
    • /
    • pp.157-178
    • /
    • 2005
  • In this thesis, ammaksae, or internal roof tiles, which was reported to be in the period of Baekje, was examined on the basis of layers of archaeological excavation and styles of relics. As a result, among the relics which have already been reported, jidumun amkiwa (concave roof tiles patterned by finger tips) excavated from Pungnap Earthen Wall and yudansik amkiwa (stepped concave roof tiles) from remains such as Guari Baekje Remains, could not be seen yet. The only relics that could be identified as original-style ammaksae or ammaksae were jidumun amkiwa unearthed from the site of Gunsurisa Temple, togiguyeon amkiwa (mouth-rim earthenware concave roof tiles) and yuaksik amkiwa (concave roof tiles with sills) from Buso Fortress and Gwanbukri Baekje Remains, and gwimyeonindongdangchomun ammaksae (honeysuckle-pattern concave end roof tiles with monster design) from the sites of Jeseok Temple and Mireuk Temple. Regarding ammaksae in the period of Baekje like the above, it is considered that jidumun amkiwa (short sills appeared), which showed up in the period of China's North Dynasties, developed into togiguyeon amkiwa and yuaksik amkiwa (sills were formed), and then gwimyeonindongdangchomun ammaksae (patterns appeared) emerged.

Design of Miniaturization Terminal Antenna for 2.4 GHz WiFi Band with MZR (MZR을 이용한 2.4 GHz WiFi 대역 소형 단말기 안테나 설계)

  • Lee, Young-Hun
    • Journal of IKEEE
    • /
    • v.23 no.1
    • /
    • pp.14-21
    • /
    • 2019
  • In this paper, we implemented an on-board miniaturization antenna operating 2.4 GHz using MZR(Mu Zero Resonator). It is must be operating under the constraint that the size of the small terminal PCB should be $78{\times}38{\times}0.8mm^3$ and the size of the system should be $63{\times}38{\times}0.8mm^3$ and the size of the radiating part should be $15{\times}38{\times}0.8mm^3$. The feeding structure uses a CPW structure for stable feeding and a feeding point at the upper left of the system board. A magnetic field coupling structure is used for coupling the feeding part and the antenna. The resonance frequency of the MZR is determined by the series inductance and capacitance of the cell, so the gap between the cells, the length of the cell, the length of the interdigital capacitor, and the spacing between the radiation part and the ground plane are analyzed. The antenna was designed and fabricated using the results. The total size of the antenna including the feed structure is $20.8{\times}9.0{\times}0.8mm^3$, and the electrical length is $0.1664{\lambda}_0{\times}0.072{\lambda}_0{\times}0.0064{\lambda}_0$. The measurement result for 10 dB bandwidth, gain and directivity are 440 MHz(18.3%), 0.4405 dB, and 2.722 dB respectively. It is confirmed that the radiation pattern has omnidirectional characteristics and it can be applied to ultra small terminal antenna.

Design and Manufacture of Triple-Band Antennas with Modified Rectangular Ring and Rectangular Patch for WLAN/WiMAX system applications (변형된 사각 링과 사각 패치를 갖는 WLAN/WiMAX 시스템에 적용 가능한 삼중대역 안테나 설계 및 제작)

  • Kim, Woo-Su;Yoon, Joong-Han
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.3
    • /
    • pp.341-348
    • /
    • 2019
  • In this paper, a monopole type antenna applicable to WLAN and WiMAX standard frequency bands is designed and fabricated. The proposed antenna is designed to have rectangular ring and rectangular patch based on microstrip feeding for triple band characteristics and inserted two stub in the top of the rectangular ring patch to enhance impedance bandwidth characteristics. The proposed antenna has $18.0mm(2W_1+W_2){\times}33.0mm(L_7+L_8+L_9)$ on a dielectric substrate of $27.0mm(W_1){\times}44mm(L_1){\times}1.0mm$ size. From the fabrication and measurement results, impedance bandwidths of 660MHz (2,08 to 2.74GHz) for 2.4/2.5MHz band, 488MHz (3.40 to 3.88GHz) for 3.5MHz band, and 2,180MHz (4.61 to 6.79GHz) for 5,000MHz band were obtained based on the impedance bandwidth. The proposed antenna also obtained the measured gain and radiation pattern in the anechoic chamber.

A Study on the Meaning of School Space: Criticism and Alternatives (학교 공간에 관한 의미 탐색: 비판과 대안)

  • Kim, Dal-Hyo
    • Journal of the Korean Institute of Educational Facilities
    • /
    • v.26 no.4
    • /
    • pp.3-10
    • /
    • 2019
  • In school facilities, space is the basic framework. The structure and arrangement of space will provide the form and feel of school facilities. In order to become a high-quality school facility, it is necessary to focus on the educational, human and ecological aspects of the instructor and learner until the space is conceived, designed and completed. However, even when public education was introduced in the past, it did not become a school space considering this aspect. The school space, which focuses on efficiency and labor production, is a school space that reflects the characteristics of a factory-type school, which has been occupied by a large number until recently. Although efforts to improve the quality of school facilities have been attempted in recent years, there is also a need to pursue more active changes. Future-oriented and progressive school spaces include flexibility, connectivity, individualization, diversity(creativity). In other words, space should be flexible so that it can be used faithfully according to the educational situation, not the fixed and limited school space as in the past. In the future, the school space should be open and securely linked to the place where it is essential to complete community relations with the community. In addition, space should be flexible so that the school can meet the needs of each student as much as possible. And the school space should be transformed from the space design of the past fixed pattern to reflect the close relationship between spatial, psychological, physiological, and behavioral areas. When school space needs to shift away from the past and change in a new future-oriented direction, the remaining tasks should be presented with specific characteristics and content of the direction. And the function of the consignment should be handled by related research. Although the text of this study reveals the characteristics of future-oriented school space, more concrete and empirical research results should be presented by subsequent research at home and abroad. It is necessary to reduce trial and error in creating a future-oriented school space where both professors and learners can be satisfied by analyzing the common points and differences between the results of the study. In order to do this, it is necessary to make efforts to approach such research based on the participation of the subjects who teach and learn directly at the school site.