• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.75-79
• /
• 1999

The beam patterns of source array and changes in the far-field signatures are compared and analyzed each other in order to identify the seismic capability affected by the misfired source at the multi-channel seismic source array. In the primary pulse amplitude of far-field signature, the 66% of seismic capacity are sustained if approximately 40% of source are misfired among whole gun volume. When the sources with the same distances are misfired at the 154㎐, the beam width of the long- and wide-array which is identical regardless of arraying pattern. The beam width has a tendency to narrow now from 41 to 34 according to increase the volume of misfired source at the long-array beam pattern. Therefore, the source array of small volume are suitable for the shallow seismic survey because of producing adequate beam patterns with narrow beam width.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.46-51
• /
• 2015

In this paper, I design a linear array antenna simulator for anti-jamming GPS systems and perform various performance analysis by simulation. First, I generate simulated transmission signals through the analysis of GPS satellite signal structure, and analyze SNR(Signal to Noise power Ratio) performance of linear array antenna according to number of arrays under noise environments. In addition, I analyze the performance of the anti-jamming beam pattern using MMSE(Minimum Mean Square Error) signal processing method, and also analyze the anti-jamming performance considering antenna calibration problem when there are different delays between arrays.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.9
• /
• pp.922-927
• /
• 2009

The transducers used in active sonar on surface ships are packed in a specific geometry in the array drum in order to meet the requirements such as the source level, directional beam pattern, etc. This paper describes the acoustic characteristics of the cylindrical array which is based on a 64 vertical staves arrangement, each stave composed 5 independent transducers. Firstly, the single transducer on the rigid baffle in the water is analyzed with the Finite Element Method. From the result of the FE analysis nodal velocities on the radiation surface is calculated and used with the boundary conditions of the transducers mounted on the array drum. Then the acoustic pressure is calculated in the field points using the Boundary Element Method and the other acoustic informations, the source level, beam pattern, near field and far-field distance, were acquired.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.23-29
• /
• 1991

In order to improve the radiation characteristics of the microstrip antenna, microstrip array antenna consisting of one center patch fed by a coaxial probe and several patches directly coupled to the E-plane by microstrip line is analyzed. The equivalent circuit of the array antenna is represented by the conventional transmission line and the various parameters, such as the mdicrostrip line length, the patch length and the feed point location are calculated to improve the radiation pattern for 5-patch array antenna which has the equal patch width. The 5-patch array antenna with the radiation pattern which has low sidelobe level and narrow beam width is fabricated and then the measured results are compared with the computed values and the results of the single patch microstrip antenna too.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.917-920
• /
• 2020

In this paper, we studied the derivation method of isoflux radiation for a planar array antenna. The presented array antenna was designed for considering of 1U-sized CubeSAT with Ku-band communications. For the presented array antenna, 8×8 radiating elements were arranged, and the distance between radiating elements was set of half-wavelength. The excited current weighting for each radiating elements was calculated by the signal processing technique used in the design of the low-pass filter. As a result of analysis of the method proposed in this paper, it was confirmed that a seamless isoflux pattern can be derived.

• Tribology and Lubricants
• /
• v.27 no.5
• /
• pp.264-268
• /
• 2011

In this study, we examined the friction characteristics of a dimple pattern on a carbon nitride coating. The study was conducted with a hexagonal array 40 ${\mu}m$ dimple pattern on a steel bearing containing a CNx coating. The area density of the dimple patterns were varied between 5% and 25%, the speed was varied from 0.06-0.26 m/s, and the load was varied between 20-100N. In general, we found that as the velocity increased, the friction coefficient increased. Furthermore, the friction coefficient was lowest at a load of 40N. The friction coefficient of the non-coated specimen was 0.025-0.15; on the other hand, the friction coefficient of the coated specimen was 0.002-0.02. Thus, we determined that the coated materials could reduce the friction coefficient by a factor of 7.5.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.367-370
• /
• 2005

In this paper, we made a Singly Fed patch which is the fittest at the feeding part. And we found out return loss and radiation pattern about dielectric rod array antenna which has six's passive element to shape FTEP(Flat-topped element pattern) after we analyzed the characters of singly dielectric rod antenna. We show the conclusion that has the optimum return loss and more flat radiation pattern.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.357-360
• /
• 2005

In the synthesis of the continuously distributed line source antennas with arbitrary patterns, the formulas of Taylor sum pattern and Bayliss difference pattern have been mainly used. In this paper, an optimization scheme is newly presented to directly synthesize the desired difference patterns from Taylor line source formula, and then the distributions are numerically adapted to the specified difference patterns by using an appropriate iterative sampling method.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1526-1531
• /
• 2007

Data transmission capacity that is required in 2010 is forecasted that increase by optical communication capacity more than present centuple, and is doing increased demand of optical communication related industry product present. Specially, Lid glass' application that is one of optical communication parts is used in optical communication parts manufacture of Fiber array, Ferrule array, Fanout Black, Silica optical waveguide chip and splitter etc. Also, it is used widely for communication network system, CATV, ATM-PON, FTTH and system. But, Lid glass need much processing times and becomes cause in rising prices of optical communication parts because production cost is expensive. The objectives, of this work is to suggest the micro concave and convex pattern manufacturing technology on borosilicate plate using high temperature and compression molding method. As a result, could developed micro pattern Mold more than 5 pattern, and reduce Lid Glass manufacture cycle time.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1956-1964
• /
• 1989

In this paper, a new method of Hangul recognition is proposed to solve the problems of misrecognition owing to the contacts of FCEs (Fundamental Character Elements) in a Hangul pattern. Structures of FCFs are represented with PAG(Programmed Array Grammar) to recognize an input pattern on 2-D. array of pels., and the unnecessary deformation of the conventional approach can be eliminated by using PEACE parsing which extracts primitives and computes attributes in the course of analyzing the structure of an input pattern. Also, primitive transformation at contacts can afford to confirm all the possible structures of an input pattern and solve the problem of misrecognition owing to the contacts of FCEs. The recognition rate of proposed method for printed Hangul characters shows 96.2% for 1978 Gothic-letters and 92.0% for 1920 Myng-style-letters, respectively.