DOI QR코드

DOI QR Code

Friction Characteristics of CNx Coated Dimple Pattern with Hexagonal Array

CNx 코팅된 육각대열 딤플패턴의 마찰특성

  • Choi, Won-Sik (Dept. of Bio Industrial Mechanical Engineering, Pusan National University) ;
  • Umehara, Noritsugu (Dept. of Mechanical Science and Engineering, Nagoya University)
  • Received : 2011.06.01
  • Accepted : 2011.08.20
  • Published : 2011.10.31

Abstract

In this study, we examined the friction characteristics of a dimple pattern on a carbon nitride coating. The study was conducted with a hexagonal array 40 ${\mu}m$ dimple pattern on a steel bearing containing a CNx coating. The area density of the dimple patterns were varied between 5% and 25%, the speed was varied from 0.06-0.26 m/s, and the load was varied between 20-100N. In general, we found that as the velocity increased, the friction coefficient increased. Furthermore, the friction coefficient was lowest at a load of 40N. The friction coefficient of the non-coated specimen was 0.025-0.15; on the other hand, the friction coefficient of the coated specimen was 0.002-0.02. Thus, we determined that the coated materials could reduce the friction coefficient by a factor of 7.5.

Keywords

References

  1. Lidia Galda, Pawel Pawlus, and Jaroslaw Sep, "Dimple Shape and Distribution Effect on Characteristics of Stribeck Curve," Tribology International, Vol. 42, pp. 1505-1512, 2009. https://doi.org/10.1016/j.triboint.2009.06.001
  2. Fanming Meng, Rui Zhou, Tiffany Davis, Jian Cao, Q. Jane Wang, Diann Hua, and Jordan Liu, "Study on Effect of Dimples on Friction of Parallel Surfaces Under Different Sliding Conditions," Applied Surface Science, Vol. 256, pp. 2863-2875, 2010. https://doi.org/10.1016/j.apsusc.2009.11.041
  3. WonSik Choi, YoungHoon Chae, and Noritsugu Umehara, "Tribological Characteristics on 40 ${\mu}m$ Dimple Pattern for Hexagonal Array," Journal of the KSTLE, Vol. 25, No. 1, pp. 25-30, 2009.
  4. SangYul Lee, SungDae Kim, and YehSun Hong, "Application of the Duplex TiN Coatings to Improve the Tribological Properties of Electro Hydrostatic Actuator Pump Parts," Surface & Coating Technology, Vol. 193, pp. 266-271, 2005. https://doi.org/10.1016/j.surfcoat.2004.07.053
  5. Ronen A., Etsion I., and Kligerman Y., "Friction Reducing Surface Texturing in Reciprocating Automotive Components," Tribology Transaction, Vol. 44, No. 3, pp. 359-366, 2001. https://doi.org/10.1080/10402000108982468
  6. Xiaobin Lu and M. M. Khonsari, "An Experimental Lnvestigation of Dimple Effect on the Stribeck Curve of Journal Bearings," Tribol Lett, Vol. 27, pp. 169-176, 2007. https://doi.org/10.1007/s11249-007-9217-x
  7. D. H. Kim, J. K. Kim, and P. Hwang, "Anisotropic Tribological Properties of the Coating on a Magnetic Recording Disk," Thin Solid Films, Vol. 360, pp. 17-194, 2000. https://doi.org/10.1016/S0040-6090(99)00950-5
  8. Wang X., Kato K., and Adachi K., "The Lubrication Effect of Micro-pits on Parallel Sliding Faces of SiC in Water," Lubrication Engineering, pp. 27-34, 2002.