• Korean Journal of Human Ecology
• /
• v.19 no.6
• /
• pp.1045-1052
• /
• 2010

Effects of the ease of pattern on the thermal conditions of clothing were investigated through the measurement of clothing surface temperatures using infrared thermography. Four vests with different pattern ease were worn by five male subjects. Surface temperature distribution on the clothing were then examined using a thermogram to view thermo-regulating characteristics affected by the ease of pattern. Representative surface temperatures were calculated based on the percentage of the surface area within a certain temperature range and the midpoint value of the corresponding area. Representative surface temperatures matches well to the thermal insulation value measured by thermal manikin. Results indicated that representative surface temperature could be a useful quantitative value if some simple calculations were to be used alongside accurate image processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2707-2715
• /
• 2010

This paper suggests a implements and a design of class diagram authorization tool based on the MVC pattern. It defines and descries the structure of ClassInformation, ScreenDisplay and ToolManager. ClassInformation is responsible for processing or handling information of a diagram. ScreenDisplay is responsible for GUI to configure the screen of the authorization tool. ToolManager is responsible for event handling to process I/O of the authorization tool. Based on MVC pattern, ClassInformation, ScreenDisplay and ToolManager of the authorization tool are assigned each role independently. It is flexible to new requirement, because of loose coupling.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.120-126
• /
• 1989

IC chip layout pattern recognition algorithms using image processing techniques are being developed for the automation of manufacturing and inspecting chips. Recognitioin of chip pattern requires feature extraction from nach rrame of chip image adn needs to match the feature data through all frames. In this paper, vertex position and form having layout information are extracted by the feature straightening algorithm, and global coordinates of layout pattern are extracted by the feature straightening algorithm, and global coordinates of layout pattern are obtainnd by vertex form matching from the overlapped area of neighbour frame.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.556-561
• /
• 2006

It is very important to classify the DNA Chip image pattern in order to acquire useful information about genetic disease of people. In this paper, we developed the novel pattern classification method of DNA Chip image using MLP based back-propagation and Self organizing Map learning algorithm. And then we compared and analyzed these classified pattern results. Also we carried out experiment in the MV2440 board using CPU Cote for S3C2440(ARM 920T) and PC environment, and displayed its results in order to give the genetic information to user mote easily in various environment.

• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.804-813
• /
• 2015

The electrical-impedance method has been widely used for void-fraction measurement in two-phase flow due to its many favorable features. In the impedance method, the response characteristics of the electrical signal heavily depend upon flow pattern, as well as phasic volume. Thus, information on the flow pattern should be given for reliable void-fraction measurement. This study proposes an improved electrical-conductance sensor composed of a three-electrode set of adjacent and opposite electrodes. In the proposed sensor, conductance readings are directly converted into the flow pattern through a specified criterion and are consecutively used to estimate the corresponding void fraction. Since the flow pattern and the void fraction are evaluated by reading conductance measurements, complexity of data processing can be significantly reduced and real-time information provided. Before actual applications, several numerical calculations are performed to optimize electrode and insulator sizes, and optimal design is verified by static experiments. Finally, the proposed sensor is applied for air-water two-phase flow in a horizontal loop with a 40-mm inner diameter and a 5-m length, and its measurement results are compared with those of a wire-mesh sensor.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.1
• /
• pp.69-74
• /
• 1998

In order to monitor the tool wear in milling operation, cutting force is measured as the tool wear increased. The digital signal processing methods are used to detect the tool wear . As AR parameter extract the feature of tool wear , it can be used as input parameter of pattern classifier. The FFT monitor the tool wear exactly , but it can not do real time signal processing. The band energy method can be used to real time monitoring of tool wear ,but int can degrade the exact monitoring.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1535-1537
• /
• 2007

A design pattern is a general solution to a commonly occurring problem. Design patterns have proven highly effective in representing, transferring, and applying the design knowledge in many engineering disciplines. However, these patterns have not addressed sensor network specifically. With a growth of sensors and sensor networks, and considering their profound applicability, there is a crucial need to articulate ones experience of application development or deployment of sensor nodes in the form of design patterns to avoid the future mistakes. This paper discusses the same issue and show applicability of design patterns in sensor networks.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1447-1449
• /
• 2007

본 논문은 이동 컴퓨팅 환경에서 시간 주기적인 인간의 행동 패턴에 따른 캐쉬 일관성 기법을 제안하고자 한다. 행동 유형 모델을 근거로 하여 시간 주기적인 행동의 패턴과 이동 기기의 사용 패턴이 동일 또는 흡사함을 가정한다. 이를 통해 패턴 예측 테이블을 구성하고, 시간대별로 구성된 테이블의 예측 데이터를 사용하여 서버와의 통신할 때 지연 현상을 방지 하는 기법을 제안한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.279-284
• /
• 1988

In this paper, NCTOP is an interactive NC auto programming system for two-dimensional machining. NCTOP consists of seven modules, that is pattern form input, free form input, AutoCAD interface, logic processing, postprocessor processing, output, and database upgrade module. The geometry information of a workpiece to be machined is put into NCTOP program. Then it generates NC program which is final output. NCTOP uses the machining dates from the data base.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.909-912
• /
• 2005

다양한 정보보호체계가 운영되고 있지만, 방화벽과 침입탐지시스템이 가장 많이 운영되고 있는 실정에서, 본 논문에서는 방화벽 관리자의 차단로그 분석을 효율적으로 지원하면서, 방화벽에 의해 차단되어 침입탐지시스템이 탐지하지 못해 관리자가 지나칠 우려가 있는 공격행위를 방화벽을 통해 인지할 수 있는 방안을 구성했다. 이를 통해 관리자는 침입탐지시스템과 함께 네트워크를 통한 스캔 및 DOS 등의 공격을 방화벽을 통해 인지할 수 있어 안정적인 네트워크 운영이 가능하다.