Browse > Article
http://dx.doi.org/10.1016/j.net.2015.06.015

AN IMPROVED ELECTRICAL-CONDUCTANCE SENSOR FOR VOID-FRACTION MEASUREMENT IN A HORIZONTAL PIPE  

KO, MIN SEOK (Nuclear Safety Research Center, Chung-Ang University)
LEE, BO AN (Institute for Nuclear Science and Technology, Jeju National University)
WON, WOO YOUN (Department of Nuclear and Energy Engineering, Jeju National University)
LEE, YEON GUN (Department of Nuclear and Energy Engineering, Jeju National University)
JERNG, DONG WOOK (Nuclear Safety Research Center, Chung-Ang University)
KIM, SIN (School of Energy Systems Engineering, Chung-Ang University)
Publication Information
Nuclear Engineering and Technology / v.47, no.7, 2015 , pp. 804-813 More about this Journal
Abstract
The electrical-impedance method has been widely used for void-fraction measurement in two-phase flow due to its many favorable features. In the impedance method, the response characteristics of the electrical signal heavily depend upon flow pattern, as well as phasic volume. Thus, information on the flow pattern should be given for reliable void-fraction measurement. This study proposes an improved electrical-conductance sensor composed of a three-electrode set of adjacent and opposite electrodes. In the proposed sensor, conductance readings are directly converted into the flow pattern through a specified criterion and are consecutively used to estimate the corresponding void fraction. Since the flow pattern and the void fraction are evaluated by reading conductance measurements, complexity of data processing can be significantly reduced and real-time information provided. Before actual applications, several numerical calculations are performed to optimize electrode and insulator sizes, and optimal design is verified by static experiments. Finally, the proposed sensor is applied for air-water two-phase flow in a horizontal loop with a 40-mm inner diameter and a 5-m length, and its measurement results are compared with those of a wire-mesh sensor.
Keywords
Conductance Sensor; Flow Pattern; Void Fraction; Wire-mesh Sensor;
Citations & Related Records
연도 인용수 순위
  • Reference
1 A.A. Kendoush, Z.A. Sarkis, Void fraction measurement by Xray absorption, Exp. Therm. Fluid Sci. 25 (2002) 615-621.   DOI
2 P. Stahl, P. Rudolf von Rohr, On the accuracy of void fraction measurements by single-beam gamma-densitometry for gas-liquid two-phase flows in pipes, Exp. Therm. Fluid Sci. 28 (2004) 533-544.   DOI
3 J. Vejrazka, M. Vecer, S. Orvalho, P. Sechet, M.C. Ruzicka, A. Cartellier, Measurement accuracy of a mono-fiber optical probe in a bubbly flow, Int. J. Multiph. Flow 36 (2010) 533-534.   DOI
4 S. Paranjape, S.N. Ritchey, S.V. Garimella, Electrical impedance-based void fraction measurement and flow regime identification in microchannel flows under adiabatic conditions, Int. J. Multiph. Flow 42 (2012) 175-183.   DOI
5 J.P. Schlegel, S. Miwa, M. Griffiths, T. Hibiki, M. Ishii, Development of impedance void meter for evaluation of flow symmetry, Ann. Nucl. Energy 63 (2014) 525-532.   DOI
6 Z. Zhang, M. Bieberle, F. Barthel, L. Szalinski, U. Hampel, Investigation of upward cocurrent gas-liquid pipe flow using ultrafast X-ray tomography and wire-mesh sensor, Flow Meas. Instrum. 32 (2013) 111-118.   DOI
7 R.E. Vieira, N.R. Kesana, B.S. McLaury, S.A. Shirazi, C.F. Torres, E. Schleicher, U. Hampel, Experimental investigation of the effect of $90^{\circ}$ standard elbow on horizontal gas-liquid stratified and annular flow characteristics using dual wire-mesh sensors, Exp. Therm. Fluid Sci. 59 (2014) 72-87.   DOI
8 D.C. Lowe, K.S. Rezkallah, Flow regime identification in microgravity two-phase flows using void fraction signals, Int. J. Multiph. Flow 17 (1999) 433-457.
9 W.H. Ahmed, Capacitance sensors for void-fraction measurements and flow-pattern identification in air-oil twophase flow, IEEE Sensors J. 6 (2006) 1153-1163.
10 H. Caniere, C. T'Joen, A. Willockx, M. De Paepe, Capacitance signal analysis of horizontal two-phase flow in a small diameter tube, Exp. Therm. Fluid Sci. 32 (2008) 892-904.   DOI
11 S. Kim, J.S. Lee, K.Y. Kim, K.H. Kang, B.J. Yun, An approximate formula for the capacitance-void fraction relationship for annular flows, Meas. Sci. Technol. 20 (2009) 125404.   DOI
12 M. Fossa, Design and performance of a conductance probe for measuring the liquid fraction in two-phase gas-liquid flows, Flow Meas. Instrum. 9 (1998) 103-109.   DOI
13 K. De Kerpel, B. Ameel, S. De Schampheleire, C. T'Joen, H. Caniere, M. De Paepe, Calibration of a capacitive void fraction sensor for small diameter tubes based on capacitive signal features, Appl. Therm. Eng. 63 (2014) 77-83.   DOI
14 P. Andreussi, A. Di Donfrancesco, M. Messia, An impedance method for the measurement of liquid hold-up in two-phase flow, Int. J. Multiph. Flow 14 (1988) 777-785.   DOI
15 N.A. Tsochatzidis, D.K. Karapantsios, M.V. Kostoglou, A.J. Karabelas, A conductance probe for measuring liquid fraction in pipes and packed beds, Int. J. Multiph. Flow 18 (1992) 653-667.   DOI
16 J.R. Kim, Y.C. Ahn, M.H. Kim, Measurement of void fraction and bubble speed of slug flow with three-ring conductance probes, Flow Meas. Instrum. 20 (2009) 103-109.   DOI
17 J.J.M. Geraets, J.C. Borst, A capacitance sensor for two-phase void fraction measurement and flow pattern identification, Int. J. Multiph. Flow 14 (1988) 305-320.   DOI
18 J. Ye, L. Peng, W. Wang, W. Zhou, Optimization of helical capacitance sensor for void fraction measurement of gas-liquid two-phase flow in a small diameter tube, IEEE Sensors J. 11 (2011) 2189-2196.   DOI
19 H.C. Yang, D.K. Kim, M.H. Kim, Void fraction measurement using impedance method, Flow Meas. Instrum. 14 (2003) 151-160.   DOI
20 S. Huang, X. Zhang, D. Wang, Z. Lin, Equivalent water layer height (EWLH) measurement by a single-wire capacitance probe in gas-liquid flows, Int. J. Multiph. Flow 34 (2008) 809-818.   DOI
21 D. Barnea, Transition from annular flow and dispersed bubble flow - unified models for the whole range of pipe inclinations, Int. J. Multiph. Flow 12 (1986) 733-744.   DOI
22 M.S. Ko, B.J. Yun, K.Y. Kim, S. Kim, Design of a capacitance sensor for void fraction measurement in annular flows through a vertical pipe, Meas. Sci. Technol. 23 (2012) 105301.   DOI
23 Y. Taitel, A.E. Dukler, A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow, AICHE J. 22 (1976) 47-55.   DOI
24 H.M. Prasser, A. Bottger, J. Zschau, A new electrode-mesh tomograph for gas-liquid flows, Flow Meas. Instrum. 9 (1998) 111-119.   DOI
25 J.M. Mandhane, G.A. Gregory, K. Aziz, A flow pattern map for gas-liquid flow in horizontal pipes, Int. J. Multiph. Flow 1 (1974) 537-553.   DOI