• 복식
• /
• 제54권1호
• /
• pp.97-108
• /
• 2004

This study was conducted to examine the marking efficiency of a dress pattern in order to reduce textile loss by pattern marking. A basic one-piece dress pattern saved to the Yuka CAD System was graded with different sizes and arranged for industrial purpose to calculate the marking efficiency in different conditions. Condition of marking experiment is made it a rule to use 150cm textile width and apply 44, 55, 66 pattern size for three pieces of a dress patterns. The results of the study indicated that the marking efficiency rates of the dress pattern with a separate facing was higher than the one with a self facing. In the dress pattern with a separate facing, the separated seam at center back was appeared to have a higher marking efficiency than the extended seam. It was also found that the efficiency rate was higher in the pattern with a seam at center back when comparing with the dress pattern without a seam. When the marking with a horizontally-loaded collar was compared with a vertically-loaded collar, the efficiency rate was higher for the collar loaded horizontally, The result of the study showed that the type of facing, the location of a seam, and the direction of collar loading were the factors directly related to increasing marking efficiency. The dress patterns marked efficiently in terms of a type of facing, seam, and collar treatment can reduce fabric loss and also shorten the time needed for marking process.

• 복식문화연구
• /
• 제17권5호
• /
• pp.746-757
• /
• 2009

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern, width of materials, and marker orientation using man's shirts. To compare the marking efficiency of shirts, plain and check-patterned materials with the intervals of $1.5{\times}1.5cm$, $3{\times}3cm$, and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on materials width, the highest efficiency was obtained with nap-either-way position of 150cm, plain materials and lowest efficiency with nap-one-way position of 150cm, $5{\times}5cm$ check-pattern materials. Regardless of the direction of marker position, the marking efficiency of 150cm width was higher than 110cm width in the plain, $1.5{\times}1.5cm$ and $3{\times}3cm$ check-pattern interval, but the marking efficiency of 110cm width was higher than 150cm width in the $1.5{\times}1.5cm$ check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and material width, the highest efficiency was obtained with nap-either-way position. And nap-up-and-down and nap-one-way follows next. Third, in the comparison of marking efficiency depending on check-pattern interval, the efficiency of plain materials was higher than those of check-patterned materials. And increasing the intervals decreased marking efficiency and vice versa. So the lowest efficiency was obtained with $5{\times}5cm$ check patterned materials.

• 복식문화연구
• /
• 제18권1호
• /
• pp.13-28
• /
• 2010

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern and marker orientation using woman's Jacket and Slacks. Research Method intended to compare the marking efficiency of Jacket and Slacks, check-less and check- patterned materials with the intervals of $1.5{\times}1.5cm$ and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on check-pattern interval, regardless of the direction of marker position, single-item makers and set-item makers, the efficiency of check-less materials was higher than those of check-patterned materials and increasing the intervals decreased marking efficiency and vice versa. Marking efficiency of Slacks was less influenced than marking efficiency of Jacket by check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and number of maker pieces, the efficiency of nap-up-and-down position was higher than those of nap-one-way position. Third, the marking efficiency of single-item was more effective than one of set-item in all working condition except nap-one-way position in checkless materials.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.112-120
• /
• 2009

The purpose of this study is to develop Andongpo apparel pattern design connected with the Apparel CAD system. It includes pattern making, grading, marking program. In this study, it will be able to make apparel pattern quickly and accurately by using Apparel CAD system. The results were as following : Computerization of the pattern making process is expected to provide higher accuracy and efficiency in apparel pattern making for narrow and expensive Andongpo. ESMOD pattern making method was selected as basic pattern. Tailored jacket patterns were developed for Andongpo. Refer to and . The jacket patterns developed is automatically depicted by inputting consumer's body size. Tailored jacket patterns for Andongpo were marked by using marking program in Apparel CAD system. The efficiency of marking appeared of 70% or more in Andongpo jacket patterns. This results is showed it has an effect on narrow and expensive Andongpo. 3tailored jacket patterns will be able to make a simulation by 3D Apparel CAD system. The results of this study is expected to provide higher consumer's satisfaction and internet brand launching. In addition, encouraging majority of the young to participate in using CAD program for Andongpo is regarded as beneficial for the reinforcement of competitiveness of traditional clothing business.

• 대한가정학회지
• /
• 제48권2호
• /
• pp.85-94
• /
• 2010

Comparative analysis of marker efficiency in blouse patterns, based on different sleeve designs, was carried out. Sleeve designs used included set-in-sleeve, laglan sleeve, and epaulet sleeve. The two types of epaulet sleeves, A and B, are based on pattern arrangement methods of center back. Cloth and production conditions are the width of cloth, the number of marking pieces, and the direction for marking deployment. A blouse pattern saved to the PAD CAD System was graded with different sizes and arranged for industrial purpose to calculate the marker efficiency in different conditions. The results were as follows. On the whole, the marker efficiency of small pattern sized set-insleeve was higher than laglan and epaulet sleeve designs. It was also established that marker efficiency is dependent on cloth and production conditions. For small number of marking pieces, efficiency was higher in the condition of 110cm cloth widths compared with that condition of 150cm cloth widths. However the efficiency of large number of marking pieces was higher in the condition of 150cm cloth widths.

• 복식문화연구
• /
• 제8권1호
• /
• pp.53-64
• /
• 2000

The purpose of this study is to help efficient use of marking system and more competitive products manufacture through the actual investigation into manufacturing process of apparel products. For lack of the previous study on marking, fundamental survey was performed on systematic research for pattern marking in ready-made production line Data were collected from 36 companies using Apparel CAD/CAM through questionnaire and interview. The data were analyzed by using Frequency and Crosstabs utilizing SPSS. The results were as follows : 1. Marking situation in clothing companies were examined ; 24 companies(66.7%) use computer marking, and 12 companies(33.3%) have both computer marking and hand marking. Besides only 9 companies out of 36(25.0%) have CAM in cutting process. 2. The efficiency in marking methods was also studied and the expense-saved ways were presented. we have found there is no difference in a way of the textural efficiency but the working methods of hand marking and computer marking. 3. Merits and demerits in marking methods were investigated. In case of marking two men's wear (Jacket and Pants), it takes 38 minutes by hand whereas it takes 15 minutes by computer ; for two women's wear (Jacket and Skirt) 49 minutes by hand, and 16 minutes by computer. 4. Most of the markers have less than 5 years experiences and among them most women are less experienced. They are in the mid-twenties after college graduations.

• 한국의상디자인학회지
• /
• 제8권1호
• /
• pp.69-79
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of A-line skirt. This study employs 4 criteria to mark the A-line skirt, which are cutting method, angle, width, and direction, respectively. There can be 2 different cutting methods(fold pattern and add seam pattern at the front and back center line), and 2 different angles(warp angle and bias angle). Also, width of the fabric can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make 16($2^*2^*2^*2$) cases for this study. Main findings are follows. First, the skirt with folded at the center line had higher efficiency rate than the skirt with add seam at the center line. Second, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Third, fixing the warp angle has higher efficiency rate than that of fixing the bias angle at the front and back center line. Finally, one direction per each size marker has much higher efficiency than the one direction marker.

• 소성∙가공
• /
• 제21권3호
• /
• pp.202-206
• /
• 2012

Marking is a process that engraves letters or a pattern onto the surface of sheet metal. During marking, it is important to set the proper working conditions for clarity of the letters. In this study a simple case for forming circular protrusions by half-piercing and embossing was initially attempted to determine the working conditions which gave good results with respect to shape accuracy. Corner-radius and flatness of circular protrusions made under several experimental conditions were measured and compared. It is shown that the precision of protrusions by half-piercing is superior to that of embossing, and the clearance between punch and die exerts a strong influence on the shape accuracy rather than the penetration percentage into the thickness of the sheet metal. The marking dies for "SNUT" letters, as an example, by applying the above results were manufactured with four different clearances. The working variables for the experiment were clearance and marking depth. For the very shallow depth of 0.1mm the letters were not clearly read. Letters marked under other conditions were easily distinguished with increasing marking depth. It was confirmed that the half-piercing technique with proper values of the working variables gives good quality for the marking of sheet metal.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.107-116
• /
• 2014

This paper presents camera-based road surface marking detection methods suited to sensor fusion-based positioning system that consists of low-cost GPS (Global Positioning System), INS (Inertial Navigation System), EDM (Extended Digital Map), and vision system. The proposed vision system consists of two parts: lane marking detection and RSM (Road Surface Marking) detection. The lane marking detection provides ROIs (Region of Interest) that are highly likely to contain RSM. The RSM detection generates candidates in the regions and classifies their types. The proposed system focuses on detecting RSM without false detections and performing real time operation. In order to ensure real time operation, the gating varies for lane marking detection and changes detection methods according to the FSM (Finite State Machine) about the driving situation. Also, a single template matching is used to extract features for both lane marking detection and RSM detection, and it is efficiently implemented by horizontal integral image. Further, multiple step verification is performed to minimize false detections.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.147-150
• /
• 2002

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can be replaced of other manufacturing methods such as silk printing, stamping, and v-cutting methods. The objectives of this research are the establishment of laser marking system, evaluation of laser marking parameters, understanding marking process, application to PMMA, reliability test and quality inspection. A 50W $CO_2$ laser (CW) was used to perform different experiments in which, the influence of some processing parameters (average power, scanning speed) on the geometry and quality of groove pattern was studied. The width of the etched grooves increases with increasing a laser power and decreasing a scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.