• The Research Journal of the Costume Culture
• /
• v.14 no.2
• /
• pp.286-298
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of flare skirt. This study employs 4 criteria to mark the flare skirt, which are angle, location, width, and direction, respectively. There can be 3 different angles$(180^{\circ},\;270^{\circ},\;360^{\circ})$, and 2 different locations(the center line and the middle of the pattern) according to fixing of the warp line of the fabric. Also, width can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make $24(3{\times}2{\times}2{\times}2)$ cases for this study. Main findings are follows. Fist, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Second, fixing the warp line at the center line has higher efficiency rate than that in the middle. Finally, per size marker has much higher efficiency than the just direction marker. In sum, we find that 150cm width with the center warp line and per size marker brings the highest efficiency rate.

• The International Journal of Costume Culture
• /
• v.6 no.1
• /
• pp.19-29
• /
• 2003

The 3D measurement data expected be useful to give appropriate garment fit and development of MTM(Made-to-Measure) CAD software. The researcher surveyed the need and use of national anthropometric data of the apparel industry. 17 Korean apparel manufacturers participated in the study. The need of anthropometric data at 5 different apparel business sectors was measured: men's suit, women's dress, casual-wear, underwear, and active sportswear. The result of the survey shows that height and bust, waist, hip circumferences are needed by all of the business sectors. The body measurements at the scye and upper arm area were need most by the men's suit manufacturers. The women's foundation garment manufacturers were well prepared for the use of the 3D body scan data and they expected the potential benefits of 3D body scan data would be great. The researcher also conducted a case study and found a pro and con of the using 3D body scan data for apparel product developing process. In the current stage of technical advance, a reasonable method was required to get nude like scan data for the women's foundation garment manufacturer. The researcher concluded that the apparel designer could use the 3D scan data for developing tremendous style garment design and pattern making.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.634-640
• /
• 2004

Nowadays, the use of apparel CAD system is important to the mass production of ready to wear. Especially, computer-based grading is the most important process to improve the fitness of clothes and to reduce the time needed to make various size pattern. The purpose of this study was to suggest a standard sizing system for high school boys' pants and to suggest a grading method according to the sizing systems. The subjects were 217 high school boys of 16 to 18 year-old. The size intervals of waist girth and hip girth were 3 cm and 4 cm respectively. The sizing system, which had frequencies more than 4%, was classified 8 cases. Among them, 71-92 and 71-88 size were the most frequent size and were adopted the basic size for the two types of grading. According to the sizing system, hand-made patterns were manufactured. By measure of the each part of the slacks, 4 size's new grading-rule patterns were developed by each size. This result will contribute to clothing fitness of consumer and the amount of production.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2012

This research was analyzed regarding comparing features of expressions between clothes in movie, , and cyber clothes that were made by Marvelous Designer2 which is a design CAD. This research was studied to experiment an expressing possibility of clothes simulation software which was developed currently. Therefore, we picked clothes that are good at movement and detail in the movie. The dress theory of the renaissance which is the period background of movie, was considered and studied as pattern, silhouette, material, color, detail and animation. The movie's dresses are made with 3D virtual and compared so 3D virtual clothes's benefits and weaknesses can be analyzed. As a result, we found that 3D virtual dress can show the real movie's feature accordingly with current developed IT standard. This will assist a development in fashion industry and become a new indicator for 3D movie clothing.

• The Research Journal of the Costume Culture
• /
• v.8 no.1
• /
• pp.53-64
• /
• 2000

The purpose of this study is to help efficient use of marking system and more competitive products manufacture through the actual investigation into manufacturing process of apparel products. For lack of the previous study on marking, fundamental survey was performed on systematic research for pattern marking in ready-made production line Data were collected from 36 companies using Apparel CAD/CAM through questionnaire and interview. The data were analyzed by using Frequency and Crosstabs utilizing SPSS. The results were as follows : 1. Marking situation in clothing companies were examined ; 24 companies(66.7%) use computer marking, and 12 companies(33.3%) have both computer marking and hand marking. Besides only 9 companies out of 36(25.0%) have CAM in cutting process. 2. The efficiency in marking methods was also studied and the expense-saved ways were presented. we have found there is no difference in a way of the textural efficiency but the working methods of hand marking and computer marking. 3. Merits and demerits in marking methods were investigated. In case of marking two men's wear (Jacket and Pants), it takes 38 minutes by hand whereas it takes 15 minutes by computer ; for two women's wear (Jacket and Skirt) 49 minutes by hand, and 16 minutes by computer. 4. Most of the markers have less than 5 years experiences and among them most women are less experienced. They are in the mid-twenties after college graduations.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.144-156
• /
• 2015

This research aims to develop textile patterns using mythical motives based on Buldoje in the Jeju myth. this textile design is not only decoration effect by filling the space, but also plays the original role of a pattern by expressing its symbolic meaning. The research methods are as follows: 1) Using integral analysis on materials related to the myth of Jeju and Gime used in Buldoje Gut, where Halmangbonpuli story is performed to set formative elements for textile design and their meanings; 2) Designing motive by composing formative elements; 3) Coloring properly; and 4) Layout motives. Adobe CS5 (Photoshop, Illustrator) and TexPro, a design CAD program, were used for textile design. Motives were combined in a various ways. Two-directional, four-directional, set, rotating, toss layout techniques, which are frequently used in apparel design and able to reduce cloth use, were used in developing patterns. Coloring methods including tone-in-tone and Faux camaieu were used to deliver coherence and soft effects. Developed textile design symbolizes the desire for the conception of a child, birth, and health, so it is made on baby clothes. In doing so, the plan for development of a fashion-cultural product applying Jeju myth symbol is suggested.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.157-164
• /
• 2006

Purpose: The purpose of this study was to compare the fracture strength of the zirconia monolithic all-ceramic crowns according to the thickness(0.5 mm, 0.8 mm, 1.1 mm) and IPS Empress II ceramic crown of 1.5 mm thickness. Material and method: Eight crowns for each of 3 zirconia crown groups were fabricated using CAD/CAM system(Kavo, Germany) and eight Empress II crowns were made from silicone mold and wax pattern. Each crown group was finished in accordance with the specific manufacturer s instruction. All crowns were luted to the metal dies using resin cement and mounted on the testing jig in a universal testing machine. The load was directed at the center of crown with perpendicular to the long axis of each specimen until catastrophic failure occurred. Analysis of variance and Tukey multiple comparison test(p<.05) were applied to the data. Results and Conclusion: 1. The fracture strength of the zirconia monolithic all-ceramic crown was higher thickness increased(p<.05). 2 The fracture strength of 1.1 mm thickness zirconia monolithic all-ceramic crown was higher than the fracture strength of 1.5 mm thickness IPS Empress II crown(p<.05). 3. The fracture strength of 0.5 mm thickness zirconia monolithic all-ceramic crown exceeded maximum occlusal forces.

• Journal of Technologic Dentistry
• /
• v.41 no.2
• /
• pp.93-100
• /
• 2019

Purpose: This study is making a dog dental prosthesis using digital dental technology. The mechanical strength of the prosthetic material was observed in terms of compressive strength and fracture pattern. Methods: The experiment was performed using dog mandibular molars. The teeth were scanned and modeled. The specimens were made of zirconia, PMMA and Ni-Cr. The specimens were subjected to a vertical compression test with an artificial cancellous bone in UTM tester. Vertical compressive strength and fracture behavior of specimen were observed. Results: The result of observing the compressive load between specimen and artificial bone were $184.8{\pm}5.7N$ in the zirconia specimen, $185.6{\pm}8.9N$ in the PMMA specimen, and $184.4{\pm}4.0N$ in the Ni-Cr alloy specimen. Compression marks of artificial bones were observed. The fracture strength of specimen was observed. The fracture strength of the zirconia specimen was an average of 1,381.4N. The fracture strength of the PMMA specimen was an average of 572.2N. Conclusion: The crown made of three kinds(zirconia, PMMA, Ni-Cr alloy) of materials has the strength to chew about the artificial bone. zirconia and PMMA have vertical compressive strength applicable to medium dog dental prosthetic materials.

• Journal of Korea Multimedia Society
• /
• v.23 no.12
• /
• pp.1486-1495
• /
• 2020

The analysis of digital microscopy images plays a vital role in computer-aided diagnosis (CAD) and prognosis. The main purpose of this paper is to develop a machine learning technique to predict the histological grades in prostate biopsy. To perform a multiclass classification, an AI-based deep learning algorithm, a multichannel convolutional neural network (MCCNN) was developed by connecting layers with artificial neurons inspired by the human brain system. The histological grades that were used for the analysis are benign, grade 3, grade 4, and grade 5. The proposed approach aims to classify multiple patterns of images extracted from the whole slide image (WSI) of a prostate biopsy based on the Gleason grading system. The Multichannel Convolution Neural Network (MCCNN) model takes three input channels (Red, Green, and Blue) to extract the computational features from each channel and concatenate them for multiclass classification. Stain normalization was carried out for each histological grade to standardize the intensity and contrast level in the image. The proposed model has been trained, validated, and tested with the histopathological images and has achieved an average accuracy of 96.4%, 94.6%, and 95.1%, respectively.

• The Research Journal of the Costume Culture
• /
• v.31 no.2
• /
• pp.213-227
• /
• 2023

To analyze the status and needs of the small- and medium-sized garment manufacturing industry in Busan, this study comprised an online survey of companies and interviews with 14 representatives of the 98 companies. The results are as follows: Approximately 34.7% of the garment manufacturers were located in Geumjeong-gu, Busan. The most common type of work was the contracting factory type. Daily production output was between 100pcs and 300pcs. Production materials comprised 42.9% woven and 24.8% knitted fabrics. Main products were menswear, uniforms, womenswear, casual wear, sports and leisure wear, protective clothes, and children's clothing. The main clients were uniform companies, main factories, wholesale markets, online shopping malls and promotion companies, exporters, and department stores. As a result of a survey on industrial needs with company representatives, their satisfaction with company employees was 57.2%, and the most important factor when hiring employees was job-related competencies, among which the ability to understand the sewing process was the most necessary. In terms of computer software literacy, illustrations and pattern CAD/CAM are required. They thought industry-university cooperation is crucial for advantage for advantage research and product development, as it allows for the sharing knowledge, resources, and especially human resources. The greatest administrative issue were human resources and funding.