• ETRI Journal
• /
• 제33권2호
• /
• pp.283-286
• /
• 2011

Path loss plays fundamental roles in system design, spectrum management, and performance evaluation. The traditional path loss model has a slight inconvenience; it depends on the unknown distance. In this letter, we explore the probability distribution function (PDF) of path loss in an indoor office environment by randomizing out the distance variable. It is shown that the resulting PDF is not Gaussian-like but is skewed to the right, and both the PDF and the moments are related to the size of the office instead of the unknown distance. To be specific, we incorporate the IEEE 802.15.4a channel parameters into our model and tabulate the cumulative distribution function with respect to different room sizes. Through a simple example, we show how our model helps a cognitive spectrum user to infer path loss information of primary users without necessarily knowing their transmitter-receiver distance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.437-442
• /
• 2000

An alternative inverse feedback structure for adaptive active control of periodic noise is introduced for systems with nonminimum phase cancellation path. To obtain the inverse model of the nonminimum phase cancellation path, the cancellation path model can be factorized into a minimum phase term and a maximum phase term. The maximum phase term containing unstable zeros makes the inverse model unstable. To avoid the instability, we alter the inverse model of the maximum phase system into an anti-causal FIR one. An LMS predictor estimates the future samples of the noise, which are necessary for causality of both anti-causal FIR approximation for the stable inverse of the maximum phase system and time-delay existing in the cancellation path. The proposed method has a faster convergence behavior and a better transient response than the conventional FX-LMS algorithms with the same internal model control structure since a filtered reference signal is not required. We compare the proposed methods with the conventional methods through simulation studies.

• 한국통신학회논문지
• /
• 제38A권9호
• /
• pp.765-772
• /
• 2013

본 논문에서는 인천공항 Concourse 지역에서 항공정보통신 무선 채널의 경로 손실 모델에 관해 연구하였다. 항공정보통신 주파수 밴드인 VHF/UHF 채널 중에 두 개의 주파수에 대해 전파 측정을 수행하였다. 현재 운영 중인 송신 사이트에서 변조 신호를 제거한 캐리어 파워를 송신하였으며, 전파 측정을 위해 수신기를 장착한 이동 차량을 이용하여 Concourse 지역에서 전파 측정을 수행하였다. 송신 파워, 주파수, 안테나 위치 등은 현재 운용 조건과 같다. 경로 손실 계수 및 실험적인 경로 손실 식은 기본적인 경로 손실 모델 및 하타 모델 등을 이용하여 추출하였다. Concourse 지역에서 추출된 LOS/NLOS 경로 손실 계수는 128.2MHz 및 269.1MHz에서 각각 3.1/3.13 및 3.01/3.38이었고 예측 에러의 편차는 각각 2.77/3.17 및 4.01/3.66이었다. 추출된 경로 손실 계수를 이용하여 Concourse 지역에서 전파 경로 손실식과 실험적인 경로 손실 계수를 도출하였으며 또한 다른 전파 패스 모델과 비교하였다. 이러한 결과는 항공정보통신 사이트 최적 위치 선정 및 항공정보통신 서비스 평가에 도움이 될 것이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권8호
• /
• pp.2473-2489
• /
• 2022

Urban development has brought about the increasing saturation of urban traffic demand, and traffic congestion has become the primary problem in transportation. Roads are in a state of waiting in line or even congestion, which seriously affects people's enthusiasm and efficiency of travel. This paper mainly studies the discrete domain path planning method based on the flow data. Taking the traffic flow data based on the highway network structure as the research object, this paper uses the deep learning theory technology to complete the path weight determination process, optimizes the path planning algorithm, realizes the vehicle path planning application for the expressway, and carries on the deployment operation in the highway company. The path topology is constructed to transform the actual road information into abstract space that the machine can understand. An appropriate data structure is used for storage, and a path topology based on the modeling background of expressway is constructed to realize the mutual mapping between the two. Experiments show that the proposed method can further reduce the interpolation error, and the interpolation error in the case of random missing is smaller than that in the other two missing modes. In order to improve the real-time performance of vehicle path planning, the association features are selected, the path weights are calculated comprehensively, and the traditional path planning algorithm structure is optimized. It is of great significance for the sustainable development of cities.

• STI Policy Review
• /
• 제1권1호
• /
• pp.93-109
• /
• 2010

Over the last decade, some Korean enterprises have emerged to become global players in their specialized products. How have they achieved such tremendous technological progress in a short period of time? This paper explores that question by examining the characteristics of technological innovation activities at major Korean enterprises. The paper begins with a brief review of the stages of economic growth and science and technology development in Korea. Then, the existing literature, explaining the Korean innovation model, is analyzed in order to establish a new framework for the Korean innovation model. Specifically, Korean firms have experienced three sequential phases, and thus, the Korean model, at the firm level, can be coined as "path-following," "path-revealing," and "path-creating." Then, the stylized facts in the first phase (path-following) and the second phase (path-revealing) are discussed, in the context of empirical evidence from the areas of memory chips, automobiles, shipbuilding, and steel. In terms of technology development, the Korean model has evolved as "collective learning" in the first phase, "collective recombination" of existing knowledge and technology in the second phase, and is assumed as "collective creativity" in the third phase. Ultimately, all three can be classified as "collective creation". Korean firms now face a transition in the modes of technological innovation in order to efficiently implement the third phase. To achieve remarkable progress again, as they did in the past, and to sustain the growth momentum, Korean firms should challenge new dimensions such as creative technological ideas, distinctive technological capabilities, and unique innovation systems -- all of which connote 'uniqueness'. Finally, some lessons from the Korean technological innovation experience are addressed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1774-1777
• /
• 1997

As factory automation is required, using the vision system is also essential. Especially, the pateh planning of parts with J-lead on PCB plays a import role of whole automation. Path planning is required because J-lead is scatteed compaed to L-lead on PCB. Therefore, in this paper, we propose path planning of part inspection with J-lead to use Hopfield Model(TSP : Traveling Salesman Problem). Then optical system suited to J-lead inspection is designed and the algorithm of J-lead solder joint and part inspection is proposed.

• 한국유체기계학회 논문집
• /
• 제15권4호
• /
• pp.67-71
• /
• 2012

This study analyzed performance changes by an inner flow path of impeller groove for side channel type ring blower using CFD. Two models have the same side channel and clearance while one has an inner flow path and the other doesn't. To analyze the performance change of a ring blower, overall performance and local flow field were analyzed. For the overall performance, pressure increase and impeller torque were checked under the design flow condition. Under the design flow condition, pressure increase was greater for the model with the inner flow path. The model with the inner flow path showed improved efficiency because the area subject to torque decreased due to the creation of inner flow path. To analyze local flow field, a section was created from the representative location of each impeller groove toward the direction of radius. Inner channel pressure distribution depending on the rotation direction shows that the model with the inner flow path has pressure equilibrium of working fluid through the inner flow path. Velocity distribution of inside impeller groove shows that flow field was coupled and appeared to form an inner wall where the flow field was stabilized.

• 한국음향학회지
• /
• 제22권7호
• /
• pp.579-584
• /
• 2003

지금까지 제안된 전파경로손실 예측모델 모두는 지표면 생활공간을 대상으로 하였을 뿐이다. 실제 해수면 자유공간은 지표면 생활공간과 물리적 계층구조가 다르다. 따라서 지표면 생활공간을 대상으로 한 전파경로손실 예측모델을 해수면 자유공간에 적용하는 경우, 전파경로손실은 실측값보다 더 적고, 한편 서비스 가능 최대 직선거리는 더 짧게 예측된다. 그러므로 본 연구에서는 CDMA방식 이동 통신 주파수대역을 중심으로 해수면 자유공간에서의 전파경로손실을 보다 정확히 예측하기 위한 모델을 제안하여 시뮬레이션하고 이를 현장 실측결과와 비교함으로써 그 실용성을 검증한다.

• Management Science and Financial Engineering
• /
• 제4권2호
• /
• pp.1-13
• /
• 1998

The Shortest Path Problem in Time-dependent Networks, where the travel time of each link depends on the time interval, is not realistic since the model and its solution violate the Non-passing Property (NPP:often referred to as FIFO) of real phenomena. Furthermore, solving the problem needs much more computational and memory complexity than the general shortest path problem. A new model for Time-dependent Networks where the flow speeds of each link depend on time interval, is suggested. The model is more realistic since its solution maintains the NPP. Solving the problem needs just a little more computational complexity, and the same memory complexity, as the general shortest path problem. A solution algorithm modified from Dijkstra's label setting algorithm is presented. We extend this model to the problem of Minimum Expected Time Path in Time-dependent Stochastic Networks where flow speeds of each link change statistically on each time interval. A solution method using the Kth-shortest Path algorithm is presented.

• 한국농공학회논문집
• /
• 제46권4호
• /
• pp.65-71
• /
• 2004

Stress Path Search Model of Evolutionary Structural Successive Optimization (SPSMESO) using Triangular Irregular Network(TIN) was developed for improving over burden at initial design of ESO and strict stress direction of strut-and-tie model and truss model. TIN was applied for discretizing structures in flexible stress path and segments of TIN was analyzed as one-dimensional line element for calculating stress. Finally, stress path was searched using ESO algorithm. SPSMESO was efficient to express the direction of stress for 2D structure and time saving.