• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.863-871
• /
• 2017

LMS (least mean square) algorithm widely used in the AVCS (active vibration control system) of helicopters calculates control input using the forward path transfer function and error signal. If the error signal is sinusoidal, it can be represented as the combination of cosine and sine functions with frequency and phase synchronized with the reference signal. The control input also has the same frequency, therefore control algorithm can be simply implemented if the cosine and the sine amplitudes of the control input are calculated and the frequency and phase of the reference signal are used. Calculation of the control input is implemented as simple matrix operation and the change of the control command is slower than the frequency of the error signal, consequently control algorithm can be operated at lower frequency. The signal processing algorithm extracting cosine and sine components of the error signals are modeled using Simulink and PIL (processor-in-the-loop) mode simulation was executed for real-time performance evaluation.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.100-106
• /
• 2006

In this paper, we proposed a TxID(Transmitter Identification) system using ZCD (Zero Correlation Duration) code as interference-cancelled spread codes for single frequency network of ATSC terrestrial DTV broadcasting. ZCD codes are simply implemented and have ZCD characteristics. Then, Proposal system can fundamentally solve interference problems caused by ICI(Inter Code Interference) and MPI(Multi-Path Interference) which happens in TxID system using spread coding method. Also, those can cancel truncated error which happens at watermarking for TxID since those can remove its period. In this paper, we identified the availability of TxID system applying interference-cancelled ZCD codes by analyzing DER (Detection Error Rate) which is simulated in various interference environments such as AWGN, ICI, and MPI.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.183-194
• /
• 2001

The centralized traffic information system is to gather and analyze real-time traffic information, to receive traffic information request from user, and to send user processed traffic information such as a path finding. Position information, result of destination search, and other information. In the centralized traffic information system, a server received path-finding requests from many clients and must process clients requests in time. The algorithm of multiple path-finding is needed for a server to process clients request, effectively in time. For this reason, this paper presents a heuristic algorithm that decreases time to compute path-finding requests. This heuristic algorithm uses results of the neighbor nodes shortest path-finding that are computed periodically. Path-finding results of this multiple path finding algorithm to use results of neighbor nodes shortest path-finding are the same as a real optimal path in many cases, and are a little different from results of a real optimal path in non-optimal path. This algorithm is efficiently applied to the general topology and the hierarchical topology such as traffic network. The computation time of a path-finding request that uses results of a neighbor nodes shortest path-finding is 50 times faster than other algorithms such as one-to-one label-setting and label-correcting algorithms. Especially in non-optimal path, the average error rate is under 0.1 percent.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.179-186
• /
• 2015

This paper proposes the target path detection algorithm using statistical characteristics of an activated time lag along a moving path of target from a neighboring sensor in PDR(Pulse Doppler Radar) sensor node environment based on USN(Ubiquitous Sensor Network) with a limitation detecting only an existence of moving target. In the proposed algorithm, detection and non-detection time lag obtained from the experimental data are used. The experimental data are through repetitive action of each 500 times about three path scenarios such as passing in between two sensors, moving parallel to two sensors, and turning through two sensors. From this experiments, error detection percentages of three path scenarios are 5.67%, 5.83%, and 7.17%, respectively. They show that the proposed algorithm can exactly detect a target path using the limited PDR sensor nodes.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.39-47
• /
• 2004

In mold machining, there are many concave machining regions where chatter and tool deflection occur since MRR(material removal rate) increases as curvature increases even though cutting speed and depth of cut are constant. Boolean operation between stock and tool model is widely used to compute MRR in NC milling simulation. In finish cutting, the side step is reduced to about 0.3mm and tool path length is sometimes over loom, so Boolean operation takes long computation time and includes much error if the resolution of stock and tool model is larger than the side step. In this paper, curvature of CL (cutter location) surface and side step of tool path is used to compute the feedrate for constant MRR machining. The data structure of CL surface is Z-map generated from NC tool path. The algorithm to get local curvature from discrete data was developed and applied to compute local curvature of CL surface. The side step of tool path was computed by point density map which includes cutter location point density at each grid element. The feedrate computed from curvature and side step is inserted to new tool path to regulate MRR. The resultants were applied to feedrate optimization system which generates new tool path with feedrate from NC codes for finish cutting. The system was applied to the machining of speaker and cellular phone mold. The finishing time was reduced to 12.6%, tool wear was reduced from 2mm to 1.1mm and chatter marks and over cut on corner were reduced, compared to the machining by constant feedrate. The machining time was shorter to 17% and surface quality and tool was also better than the conventional federate regulation using curvature of the tool path.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1450-1456
• /
• 2015

The received signal strengths according to the propagation distance between a transmitting shore station with a 53 m antenna hight and a receiving ship station with about 6m antenna hight from 700 m upto about 20 km are measured at ship's moving velocity of $5{\pm}1m/s$ using a single carrier signal at 150.0625MHz. In this paper, the path loss exponents at the propagation distance from 700 m to 20km are estimated via minimum-mean-square-error method using the measurements of the received signal strength, and the mean of the estimated path loss exponent become 3.79. The estimated propagation path loss exponents is similar to that calculated based on the field-strength values from 2 km to 20 km in Annex 2 of ITU-R P.1546-4, which is measuring results at maritime VHF at 100 MHz carrier frequency. Therefore, the estimated propagation path loss exponent shall be used as the expected path loss exponents for summer in costal area of South Sea of Korea.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.407-416
• /
• 2020

Recent complex battle field demands Network Centric Warfare(NCW) ability to control various parts into a cohesive unit. In path planning filed, the NCW ability increases complexity of path planning algorithm, and it has to consider a communication coverage map as well as traditional parameters such as minimum radar exposure and survivability. In this paper, pros and cons of various propagation models are summarized, and we suggest a coverage map generation method using a Longley-Rice propagation model. Previous coverage map based on line of sight has significant discontinuities that limits selection of path planning algorithms such as Dijkstra and fast marching only. If there is method to remove discontinuities in the coverage map, optimization based path planning algorithms such as trajectory optimization and Particle Swarm Optimization(PSO) can also be used. In this paper, the Longley-Rice propagation model is used to calculate continuous RF strengths, and convert the strength data using smoothed leaky BER for the coverage map. In addition, we also suggest other types of rough coverage map generation using a lookup table method with simple inputs such as terrain type and antenna heights only. The implemented communication coverage map can be used various path planning algorithms, especially in the optimization based algorithms.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.1-8
• /
• 2023

An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2023

Weeding in orchards is closely associated with productivity and quality. The customary weeding process is both labor-intensive and time-consuming. To solve the problems, there is need for automation of agricultural robots and machines in the agricultural field. On the other hand, orchards have complicated working areas due to narrow spaces between trees and amorphous terrain. Therefore, it is necessary to develop customized robot technology for unmanned weeding work within the department. This study developed a path generation and path control method for unmanned weeding according to the orchard environment. For this, the width of the weeding span, the number of operations, and the width of the weeding robot were used as input parameters for the orchard environment parameters. To generate a weeding path, a weeding robot was operated remotely to obtain GNSS-based location data along the superheated center line, and a driving performance test was performed based on the generated path. From the results of orchard field tests, the RMSE in weeding period sections was measured at 0.029 m, with a maximum error of 0.15 m. In the steering period within row and steering to the next row sections, the RMSE was 0.124 m, and 0.047 m, respectively.