Browse > Article

Feedrate Optimization Using CL Surface  

김수진 (한국과학기술원 기계공학과 대학원)
정태성 (한국과학기술원 기계공학과 대학원)
양민양 (한국과학기술원 기계공학과)
Publication Information
Journal of the Korean Society for Precision Engineering / v.21, no.4, 2004 , pp. 39-47 More about this Journal
Abstract
In mold machining, there are many concave machining regions where chatter and tool deflection occur since MRR(material removal rate) increases as curvature increases even though cutting speed and depth of cut are constant. Boolean operation between stock and tool model is widely used to compute MRR in NC milling simulation. In finish cutting, the side step is reduced to about 0.3mm and tool path length is sometimes over loom, so Boolean operation takes long computation time and includes much error if the resolution of stock and tool model is larger than the side step. In this paper, curvature of CL (cutter location) surface and side step of tool path is used to compute the feedrate for constant MRR machining. The data structure of CL surface is Z-map generated from NC tool path. The algorithm to get local curvature from discrete data was developed and applied to compute local curvature of CL surface. The side step of tool path was computed by point density map which includes cutter location point density at each grid element. The feedrate computed from curvature and side step is inserted to new tool path to regulate MRR. The resultants were applied to feedrate optimization system which generates new tool path with feedrate from NC codes for finish cutting. The system was applied to the machining of speaker and cellular phone mold. The finishing time was reduced to 12.6%, tool wear was reduced from 2mm to 1.1mm and chatter marks and over cut on corner were reduced, compared to the machining by constant feedrate. The machining time was shorter to 17% and surface quality and tool was also better than the conventional federate regulation using curvature of the tool path.
Keywords
CL surface; Curvature of surface; Material removal rate; Cutting force; Feedrate optimization;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Kim, C. B. and Yang, M. Y., 'Verification System for Cutting Condition of Ball-End Milling Process,' Korean Society of Precision Engineering, Vol. 12, No. 2, pp. 123-134, 1995   과학기술학회마을
2 Kim, K. M., Ju, J. P., Kim, B. H. and Ju, J. N., 'The Study on the Cutting Force Predition in the Ball-End Milling Process at the Random Cutting Area using A-map,' KSPE Conference, pp. 125-129, 1996
3 Ko, J. H., Yun, W. S., Kang, S. J., Cho, D. W. and Ahn, K. G., 'Development of a Virtual Machine Tool-Part2: Dynamic Cutting Force Model, Thermal Behavior Model, Feed Drive System Model, and Comprehensive Software Environment,' International Journal of the Korean Society of Precision Engineering, Vol. 4, No. 3, 2003   과학기술학회마을
4 Choi, B. K. and Jerard, R. B., 'Sculptured Surface Machining,' Kluwer Academic Publishers, pp. 180-184, 1998
5 Ko, J. H., Cho, D. W. and Ko, T. J., 'Off-line Feed Rate Scheduling For 3d Ball-end Milling Using a Mechanistic Cutting Force Model,' Transaction of NAMRI/SME, pp. 113-120,2003
6 Farouki, R. T., Manjunathaiah , J. D., Yuan, G. F. and Jee, S., 'Variable-feedrate CNC Interpolators for Constant Material Removal Rates along Pythagorian-Hodograph Curves,' Computer-Aided Design, Vol. 30, pp. 631-640, 1998   DOI   ScienceOn
7 Lo, C. C., 'A new approach to CNC tool path generation,' Computer-Aided Design, Vol. 30, pp. 649-655, 1998   DOI   ScienceOn
8 Chu, C. N., Kim, S. Y. and Lee, J. M., 'Feed-rate Optimization of Ball End Milling Considering Local Shape Features,' Annals of CIRP, Vol. 46/1, pp. 433-436, 1997   DOI   ScienceOn
9 Farouki, R. T., Tsai, Y F. and Wilson, C. S., 'Physical Constraints on Feedrates and Feed Accelerations along Curved Tool Paths,' Computer-Aided Geometric Design, Vol. 17, pp. 337-359, 2000   DOI   ScienceOn
10 Ferrie, F. P., Lagarde, J. and Whaite, P., 'Darboux Frames, Snakes, and Super-Quadrics: Geometry from the Bottom Up,' IEE Transaction on Pattern Analysis and Machine Intelligence, Vol. 15/8, pp. 771-784, 1993   DOI   ScienceOn
11 VeriCut, http://www.cgtech.com
12 Fan, T. J., Medioni, G. and Nevatia, R., 'Segmented Descriptions of 3-D Surfaces,' IEEE Journal of Robotics and Automation, Vol. RA-3/6, pp. 527-538, 1987
13 양민양, '절삭가공 이론과 실제', 청문각, pp. 25-28, 1997