• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.162-166
• /
• 2020

The present paper presents an array antenna of a microstrip patch for 5G applications. Four rectangular microstrip patch elements are arranged in parallel and series to form an array antenna. Two insets are made on both sides of each patch element to achieve a wide frequency bandwidth of 23.97-31.60 GHz. To attain a high gain and wider bandwidth, the microstrip patch antenna is fed using series and corporate feeding networks. Further, three director elements on top of the top-most patch elements, and one reflector element at the open end of each patch element, are added. The addition of the Yagi elements improved the overall gain and acquired a higher radiation efficiency throughout the operating frequency bandwidth, with the array antenna achieving a maximum peak gain of 8.7 dB. The proposed antenna is built on a low-loss and low-cost substrate of FR4-eproxy. The proposed antenna design with a simple structure is suitable for Internet of Things and 5G applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1598-1603
• /
• 2003

A microstrip array antenna is designed and tested for satellite broadcasting receptions. The Sierpinski equilateral triangular patch and SSFIP(slot­strip­foam­inverted patch) structures are used. The Sierpinski geometry is composed of 3 equilateral triangular patch and is easy to generate a circular polarization by sequential rotation array techniques. This 1${\times}$3 Sierpinski equilateral triangular patch antenna is extended to 8${\times}$2 array antenna for satellite broadcasting receptions. The measurement results of the reflection coefficients and the radiation patterns of the manufactured array antenna show good agreements with the simulation results.

• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.36-46
• /
• 2006

In this paper, we present a two-element circularly-polarized antenna array for UHF-band RFID reader applications. The antenna element in the array is a comer-truncated rectangular patch placed on a thick plastic-foam dielectric. The patch is fed on one of its edges by a microstrip line printed on a separate thin substrate. The array antenna is fed by a microstrip power divider. Parametric studies on the patch are carried out, from which an optimum design of a single antenna element is derived. The element spacing and the feed network of the array are investigated. A commercial electromagnetic software is employed in the analysis and design of the antenna. The designed array is fabricated and tested. Measurements show good performance characteristics of the fabricated antenna: a 11.2-dBi gain, a reflection coefficient of - 14 dB, an axial ratio less than 3 dB over 3-dB beamwidths of 40 and 60 degrees on two principal planes.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.64-71
• /
• 2007

In this paper, we have designed and fabricated microstrip antenna of S-band for the wireless LAN and the ISM. It array $2{\times}2$ circular patch antenna elements at plane instead of conventional rectangular patch antenna elements. It optimized to size calculated of single patch antenna. The radiation elements distance is array $0.24{\lambda}$. The fabricated circular patch antenna decreased 8% of size compared to the conventional rectangular patch antenna. In the E-plane, designed circular microstrip patch $2{\times}2$ array antenna gain is 12.7[dBi], half power beam width is $40^{\circ}$ and in the H-plane, antenna gain is 12.1[dBi], half power beam width is $45^{\circ}$. Bandwidth is 250[MHz] (VSWR < 2).

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.20-25
• /
• 2018

In this paper, we have designed circularly polarized array antenna for 5.8GHz microwave wireless power transmission. To obtain high antenna gain, we studied a single patch antenna, a $2{\times}1$ array antenna, a $2{\times}2$ array antenna, a $2{\times}4$ array antenna, and a $4{\times}4$ array antenna. Commonly, characteristics of each antenna have a frequency of 5.8 GHz and Right Hand Circular Polarization(RHCP) of circular polarization. Also, the results were obtained with the design to each antenna that the return loss was less than -10dB and the axial ratio was less than 3dB. The gain of the antennas was 6.08dBi for a single patch antenna, 9.69dBi for a $2{\times}1$ array antenna, 12.99dBi for a $2{\times}2$ array antenna, 15.72dBi for a $2{\times}4$ array antenna and 18.39dBi for a $4{\times}4$ array antenna. When the elements of the array antenna were increased, it was confirmed that it increased by about 3dBi.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.92-99
• /
• 2011

Effect of a finite grounded substrate on mutual coupling characteristics of a 2-element array antenna using inductor loaded patch antennas is investigated. The mutual coupling characteristics of a 2-element array antenna using inductor loaded patch antennas positioned along the E-plane are compared with those positioned along the H-plane. The magnitude of mutual coupling is very small and the distance between the center of element and the substrate edge on the E-plane for the minimum mutual coupling is similar regardless of the direction at which antenna elements are positioned in the case of a 2-element array antenna using inductor loaded patch antennas.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.122-125
• /
• 2005

This paper describes a design of a miniature patch antenna and its 4-channle array for 5.25 GHz wireless LAN band. Each patch element is designed for the low mutual coupling between each element and for the small size of the array antenna. The size of the each element is $7 mm{\times}14.5 mm{\times}5.6 mm$ and it satisfy IEEE 802.11a frequency band. It is arrayed for independent 4-channel operation. The total size of the array antenna is $35.6 mm{\times}52.5 mm{\times}5.6 mm$. The measured reflection coefficients and the radiation patterns of the fabricated antennas show the reasonable agreements with prediction.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.285-289
• /
• 2002

In this paper, microstrip line-probe feeding patch array antenna with center frequency 5.8㎓ is designed and manufactured. The microstrip line - probe feeding structure has broadband characteristic and be able to modify the array structure for improving antenna gain. In this result, microstrip line-probe feeding patch array antenna has 17.6% bandwidth and 8㏈i antenna gain, respectively.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1613-1614
• /
• 2006

In this paper, a $4{\times}4$ rectangular patch array antenna operated at 20 GHz is implemented for the satellite communication. Two $2{\times}2$ subarrays are designed and more efficient $2{\times}2$ subarray is used for the design of $4{\times}4$ patch array. The sixteen patch antennas and microstrip feeding line are printed on the single-layered substrate. The spacing between the array elements is chosen to be $0.736{\lambda}$. HPBW (Half-Power Beam Width) is 17.6 degrees in the E-plane and 18.7 degrees in the H-plane with a gain of 17.2SdBi in the simulation results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.49-52
• /
• 2003

A microstrip array antenna is designed and tested for satellite broadcasting receptions. The Sierpinski equilateral triangular patch and SSFIP(slot-strip-foam-inverted patch) structures are used. This 1$\times$3 Sierpinski equilateral triangular patch antenna is extended to 8$\times$2 array antenna for satellite broadcasting receptions. The measurement results of the reflection coefficients and the radiation patterns of the manufactured array antenna show good agreements with the simulation results.