• 한국전자파학회논문지
• /
• 제14권11호
• /
• pp.1176-1183
• /
• 2003

본 논문에서는 1.6 ㎓ PCS 대역 초소형 전압제어발진기를 LTCC 기술을 이용하여 구현하였다. 상용부품들을 사용하여 VCO 회로를 설계하고, LTCC 기판 내부에 실장될 인덕터, 캐패시터들을 시뮬레이션을 통하여 최적으로 설계하였다. 설계된 수동소자들은 시뮬레이션을 위하여 등가회로로 모델링한 후 회로 파라메타를 추출하였다. 모델링된 내장형 부품과 21층 구조의 LTCC 기 판을 이용하여 전압제어 발진기를 설계하였으며, 4.0${\times}$4.0${\times}$1.6 ㎣ 크기의 VCO를 제작하였다. 제작된 전압제어 발진기의 동작전압은 2.7 V, 소모전류는 최대 8.5 ㎃ 이하이었으며, 동작주파수는 1,620∼l,650 MHz이다. 또한 동작주파수 내에서의 위상잡음특성은 100 KHz offset에서 -ll2.67 ㏈c/Hz의 우수한 특성을 지녔으며, -30 ㏈ 이상의 고조파억압특성을 보였다.

• 한국지열·수열에너지학회논문집
• /
• 제8권2호
• /
• pp.27-35
• /
• 2012

Five zero energy house models developed in Korea for the purpose of the energy performance were compared and analyzed in the study. The standard passive house model applying common technology and efficient energy performance elements was proposed. Standard passive house 5 models have been developed commonly aiming at 100% energy saving, applying high-performance and high-efficiency exterior thermal insulation, using 3 low-e coated window system, and targeting average 0.65 ACH to enhance privacy. Energy recovery ventilators and dry and cold radiant heating floor has been partially applied. Eco-design techniques such as the awning device, heat insulating door, using natural light have been used. Solar and geothermal systems as the application of renewable energy technologies have been commonly applied. And fuel cells were applied to a partial model. The standard model based on common technical elements and average performance of each element and obtained from five model analysis has been proposed in the study.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.878-882
• /
• 2016

These days, SFCLs are being developed in order to limit fault current. However, the superconducting elements that limit the fault current have such problems as capacity increase and require auxiliary devices including cooling device. If devices that comprise the current power network can withstand fault current for at least one cycle, it is possible to limit the fault current with current limiting elements by bypassing it on the fault line. In this study, the fault current limiter was configured with current transformer, vacuum interrupter, and current limiting element. Through the experience, it was confirmed that the fault current was limited within one cycle. The superconducting element, as a current limiting element, limited the fault current by 80 % within one cycle from fault occurrence, and the passive element limited it more than 95 %. Also, through the comparison between resistance curve and power consumption curve, it was confirmed that the current limiting element using a passive element was more stable than the superconducting element that required capacity increase and other auxiliary devices. It was considered that the FCL proposed in this study could limit fault current stably within one cycle from fault occurrence by using the existing power technologies such as fault current detection and solenoid valve operating circuit.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.7-11
• /
• 2003

Photoelectrochemical response and electrochemical impedance behavior was investigated for passive film formed on sputter-deposited Cr alloy in $0.1kmol{\cdot}m^{-3}$. Photoelectrochemical action spectrum could be separated into two components, which were considered to be derived from $Cr_2O_3$ ($E_g\sim3.6eV$) and $ Cr(OH)_3 $ ($E_g\sim2.5eV$). The band gap energy, $E_g$, of each component was almost constant for various applied potentials. polarization periods and alloying additives. The photoelectrochemical response showed negative photo current for most potentials in the passive region. Therefore, the photo current apparently exhibited p-typesemiconductor behavior. On the other hand, Mort-Schottky plot of the capacitance showed positive slope, which means that passive film formed on Cr alloy has n-type semiconductor property. These apparently conflicting results are rationally explained assuming that the passive film on Cr alloy formed in the acid solution has n-type semiconductor property with a fairly deep donor level in the band gap and forms an accumulation layer in the most of potential region in the passive state.

• 대한전자공학회논문지
• /
• 제11권3호
• /
• pp.36-41
• /
• 1974

임의의 차수의 전진함수의 실현에 전류변환 GIC를 쓰는데 고 admittance변환함수 h(s)가 k/s 되게 하는 경우와 k/s가 되게 하늘 경우와 두가지에 대해서 실현방법을 제시하였다. h(s)=k/s의 방법이 수동회로망에 Capacitor를 표구하지 않은 이점이 있으나 필요한 GIC의 개수가 h(s)=k/s의 경우보다 많아진다. 제시된 두가지 방법으로 2차의 부원함수를 실현하였고 회로소자의 Q와 발진주파수에 대한 Sensitivity를 조사하여 h(s)=k/s 의 방식이 비교적으로 유리함을 밝혔다.

• ETRI Journal
• /
• 제29권4호
• /
• pp.470-476
• /
• 2007

In this paper, a versatile three-input five-output universal capacitor-grounded voltage-mode filter is proposed. The circuit employs two differential voltage current conveyors as active elements together with two grounded capacitors and four resistors as passive elements. The proposed configuration can be used as either a single-input five-output or three-input two-output. Unlike the previously reported works, it can simultaneously realize five different generic filtering signals: lowpass, bandpass, highpass, bandreject, and allpass. It still maintains the following advantages: (i) the employment of all grounded capacitors, (ii) no need to employ inverting-type input signals, (iii) no need to impose component choice, (iv) orthogonal control of the resonance angular frequency ${\omega}_o$ and the quality factor Q, and (v) low active and passive sensitivity performances.

• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.556-563
• /
• 2012

This study focuses on the element configuration of hybrid mounts which are combined with passive elements and active elements. The seven configurations are presented according to connection of an active element to a passive element. The dynamic characteristics and control performance of them are investigated qualitatively using Bode plots. With reference to the transmitted force from internal to external, three cases are selected. In addition, some numerical simulations for the three cases are carried out to confirm the performance quantitatively. Based on this research results, a novel hybrid mount with excellent performance will be able to be developed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.151-154
• /
• 2000

This paper proposes a novel circuit configuration realizing biquadratic voltage transfer functions using three CCIIs and six passive elements. The circuits realize high-pass, band-pass, low-pass, band-stop and all-pass functions by selecting input voltages. The circuit has low passive sensitivities and permits orthogonal adjustment of quality factor Q and cutoff angular frequency $\omega$$\sub$o/. The effects of non-ideal CCIIs on biquadratic transfer functions are also given.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.186-188
• /
• 2008

The wireless communication revolution has spawned a revival of interest in the design and optimization of radio transceivers. Radio transmit modules continue to shrink in die size and cost, requiring novel approaches for integration of the numerous passive elements of the radio front-end. A 3 dB Wilkinson power divider based on GaAs substrates, for DCS 1710-1880 MHz band was designed and fabricated showing excellent performance.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권2호
• /
• pp.15-23
• /
• 2016

Purpose: Planning space of the house is important as a universal place to relieve stress of contemporary people. Void space is easy to perform mental and cultural programs in aspect of affording the healing behavior. The "Interface" accommodates healing behaviors through mutual interchange between void space and solid space as the edge of the solid space around void space. This study presents a efficient theory of healing space through combining space theory with the Kitwood's theory of psychiatry used for the art therapy. Methods: Spatial elements based on Kitwood's theory converges towards 2 behavioral elements; Meditation(-), Sense of Community(+). Balancing with reciprocal complement between behaviors of passive and stable "Meditation(-)" and active and released "Sense of Community(+)" was analysed. Results: "Faciliation" can be used in combination with "Flow(+)" as active factor. "Validation" is combined with "Prospect(+,-)", and divides into 2 factor ; "Recognition-Refreshment(-)", "Reaction-Social Exchange(+)". "Holding" is combined with "Refuge(-)" as passive factor. Implications: This study established concept of spatial healing elements in connection with theory of Psychiatry about Alzheimer that is extreme situation of stress. This study is expected to enhance the validity and efficiency in analysis of healing space.