• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.91-98
• /
• 2011

This study is to concern about the effort of architectural practice to realize the sustainable architecture. It is necessary to know about the integrated design method which combines the passive design method with the active design method from the initial design phase. One case study is followed to explain the method. Integrated design starts from defining the project and goal setting, site evaluation, design concept, design optimization, documents and specifications, bidding and construction and post occupancy evaluation followed respectively. In order to construct the sustainable design, sophisticated understanding about nature and its' principle is important and adaptable application of nature and climate depending on location is followed. In conclusion, architects and specialists of sustainable design should make an effort more study.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.261-266
• /
• 2001

The flexural vibration of laminated composite beams with active and passive constrained layer damping has been investigated to design a structure with maximum possible damping capacity. The equations of motion are derived fro flexural vibrations of symmetrical,. multi-layer laminated beams. The damping ratio and model damping of the first bending mode are calculated by means of iterative complex eigensolution method. The direct negative velocity feedback control is used for the active constrained layer damping. It is shown that the flexible laminated beam is more effective in the vibration control for both active and passive constrained layer damping. and this paper addresses a design strategy of laminated composite under flexural vibrations with constrained layer damping.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.603-607
• /
• 2009

About a Structure is performance external insulation is fundamantal performance for enrgy-saving. these day, most of residential structures have constructed by internal insulation method structure. The method structure internal insulation have construction and economical efficiency, but on the other hand, be generated heat loss by heat bridge especially, be generated loss heat-energy logical consequence in structure ondol. The external insulation structure method has a mert able to minimum to loss heat about heat-bridge. But the external insulation technique is unsatisfactory statues within the know-how and method of construction and materials compared with developed countries. The recently, the requirement of market related to the external insulation technique is resulted by the energy efficiency system, but it can lead to the lack of alternative technique In study on the korea type passive house building design for insulation block method of wall system has to experimental characteristic heat-energy of practice building. In result field-experimental, the heat-bridge appeared to characteristic spent heat-energy of blow 2L class and have a suffience performance it.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.199-202
• /
• 2000

RFID (Radio Frequency Identification) is a technique which is used for identifying different types of objects and tracking people and animals. Passive RFID consists of reader, a passive tag. The reader transmit energy to a tag and read information back from tag. The tag is energized by a carrier frequency which is transmitted by the reader and transmit information back to the reader. In this paper, the circuit for read and write RFID system is presented. The presented RFID system adopts 125kHz carrier frequency, backscattering and PSK for communication method.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (2)
• /
• pp.661-663
• /
• 2002

객체 지향 분산 시스템에서 어느 한 객체가 메모리를 차지하게 되면 그 객체를 Active 하다고 하며 그 반대를 Passive 하다고 말한다. Activation 이란 Passive 한 객체를 Active 하게 해주는 전환 과정을 뜻한다. 자바의 RMI(Remote Method Invocation)는 Activation 메커니즘을 JDK1.2.x 버전부터 채택해 사용하고 있는데, Activation 메커니즘이 지원되지 않는 JDK1.1.X의 RMI 에 Activation 메커니즘을 덧붙이는 형태로 API를 제공하고 있기 때문에 그 뼈대는 Activation 메커니즘 기반이 아니므로 그 효율성 및 성능이 떨어진다 볼 수 있다. 본 논문은 이를 개선 Activation 메커니즘 기반의 API를 설계 구현한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 가을 학술발표회 논문집
• /
• pp.63-68
• /
• 1993

Soil nailing is a method of reinforcing natural deposits of soil with passive inclusions, called nails, of steel or other materials. Its purpose is mainly to increase the tensile and shear strength of the soil mass. This method has been widely used during the last two decades to stabilize steep slopes in several countries (France, Germany, USA, Japan, etc.). The design methods that have been mostly used are Davis method, German method, and French method which are based on limit equilibrium approaches, and Juran method which utilizes the kinematical limit equilibrium design concept. This paper is focussed on the evaluation of the available design methods(especially, the France, Davis and German design methods) through comparison with each different assumption for the failure surface, the concept of failure mechanism and the definition of safety factor. The parametric study to identify the effects of design parameters on the overall factor of safety has also been conducted. By considering the results along with the associated assumptions which have been postulated in the several methods, the applicability of the method for a given soil and nail conditions has been evaluated.

• Journal of electromagnetic engineering and science
• /
• 제6권3호
• /
• pp.155-159
• /
• 2006

An efficient method is presented to design filters without the similarity transform of their coupling coefficient matrix as circuit parameters, which is very tedious due to pivoting and deciding rotation angles needed during the iterations. The transfer function of a filter is directly used for the design and its desired form is derived by the optimized rational-function fitting technique. A 3rd order coaxial lowpass filter is taken as an example to validate the proposed method.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.51-58
• /
• 2015

In order to decrease the size of a switch mode power supply, high switching frequency can be an efficient way to reduce the size of passive components in the converter. In this paper, a 500-kHz high-frequency LLC resonant converter is proposed with an accurate design method of magnetizing inductance, as well as the relationship between the switching frequency and the size of the passive components. Simulation and experimental results are presented to verify the proposed methods and equations, including the temperature data of each passive and active device of the converter. Using those results, dominant power losses in the prototype converter under 500-kHz high-frequency operation are investigated, compared with the results from a 100-kHz converter. In addition, operating waveforms and power conversion efficiency will be shown to obtain design considerations for the high switching frequency LLC resonant converter.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.49-57
• /
• 2013

해양플랜트의 설계는 위험요인을 정량적 위험성평가를 통해 계량화하여 그 결과를 설계에 반영하는 것이 일반화되어 있다. 대표적인 위험요소인 화재 위험에 대해서도 이는 마찬가지다. 계량화된 화재 위험에 대해 작업자들이 탈출하는 동안 안전설비의 기능을 유지하고 발생된 화재가 더 크게 전이(escalation)되는 것을 방지하는 것이 방화대책의 궁극적인 목적이다. 본 논문에서는 대표적인 방화대책인 능동방화대책과 수동방화대책의 적용사례를 살펴보고 수동방화대책의 설계기법들을 소개한다. 수동방화대책은 효과적인 방화기법이지만 초기 투자비가 많이 소요되고 운용과 유지보수에 애로사항이 크다. 따라서, 최근 들어 발주자들은 수동방화대책을 최적화하도록 해양플랜트 설계자에게 요청하는 추세이다.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.69-84
• /
• 1994

본 연구에서는 불안정한 사면의 효율적 보강을 위해 앵커 또는 폐타이어 벽체 공법의 적용성을 설계측면에서 검토하였다. 이를 위해, 앵커 또는 폐타이어 벽체가 설치된 보강사면의 외적안정해석법 제시가 우선 이루어졌으며, 또한 Meyerhof 지지력 이론 및 횡하중을 받는 말뚝단면의 발생응력분포 실험결과를 토대로 벽체 자체의 내적안정에 관련된 앵커 또는 폐타이어에서 발휘되는 수동저항력 예측을 위한 이론식을 제시하였다. 본 연구에서 제시된 수동저항력 계산식의 적합성 검토를 위해 Murray 인발실험결과와의 비교가 이루어졌으며, 아울러 강재보강띠를 적용하는 일반 보강토벽체 공법과 설계상의 장점 등에 관해 비교도 이루어졌다. 최종적으로는 앵커 또는 폐타이어 벽체가 설치된 보강사면 설계예를 제시하여 이에 대한 안정검토 및 겨로가분석이 수행되었으며, 기존 불안정한 사면의 경사도를 낮추어 안정성을 확보하는 공법과의 비교를 통해 앵커 또는 폐타이어 벽체공법의 효율성 검토도 이루어졌다.