• Computational Structural Engineering
• /
• v.17 no.4 s.66
• /
• pp.17-22
• /
• 2004

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.329-340
• /
• 1997

A passive control of interaction of condensation shock wave / boundary layer for reducing the strength of condensation shock was conducted experimentally in a 2.5 * 8 cm$^{2}$ indraft type supersonic wind tunnel. The effects of following factors on passive control were investigated: 1) the thickness of porous wall, 2) the diameter of porous hole, and 3) the orientation of porous hole. On the other hand, the location of nonequilibrium condensation region and condensation shock wave was controlled by regulation of the stagnation conditions. Surface static pressure measurements as well as Schlieren observations of the flow field were obtained, and their effects were compared with the results the cases of without passive control. It was found that thinner porous wall, smaller porous hole and FFH orientation for the same cavity size and porosity of 12% are more favourable than the cases of its opposite.

• Journal of Periodontal and Implant Science
• /
• v.39 no.2
• /
• pp.199-204
• /
• 2009

Purpose: Excessive gingival display and short clinical crowns due to altered passive eruptions are major concerns for a considerable number of patients visiting dental clinics. Altered passive eruptions could be corrected through various types of periodontal surgery conformable to a classification. 3 cases are reported here on the esthetic correction of altered passive eruption to evaluate results of crown lengthening procedure. Methods: Three patients whose major complaints were excessive gingival display and short teeth were picked out for this case study. Before treatment, clinical and radiological exam was performed to choose type of surgery. Thickness and width of keratinized gingiva was measured in all three patients then they were treated by surgical methods including flap operation and depigmentation under subsequent diagnosis. Results: Uneventful healing and stable gingival margin were observed in all three patients except recurrence of gingival pigmentation of one patient. Conclusions: The treatment of altered passive eruption requires precise diagnostic procedure and could achieve better esthetic outcomes when it is accompanied by other orthodontic and orthognathic treatment.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.382-392
• /
• 2011

This paper proposes the streaming radio frequency identification (RFID) protocol to support robust data streaming in a passive communication, which is extended from the ISO18000-6 Type C RFID standard. By observing and modeling the unique bit error behavior through detailed analysis in this paper, we found that performance is significantly limited by inaccurate and unstable link frequencies as well as low SNR which are inevitable for passive devices. Based on the analysis, we propose a simple and efficient protocol to adaptively insert extra error control sequences in a packet for tolerating tough link condition while maximizing the throughput and preserving the minimal implementation cost. To evaluate effectiveness of our proposal in real-time streaming applications, we experimented on real-time H.264 video streaming and prototyped the system on FPGA. To our best knowledge, our paper is the first work to take analytical approach for maximizing the throughput and demonstrate the possibility of the realtime multimedia streaming transmission in the passive RFID system.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.196-199
• /
• 2001

This paper deals with current harmonics and unbalanced source voltages compensation using combined filter system. Filter system consists of a series active filter and parallel passive filters. Passive filters were a traditional method to compensate current harmonics, so those were installed in power system widely. The active filter can be a substitution to improve filtering characteristics and complement drawbacks of the passive filter. The combined system of the active power filter and passive filter can has a better compensation performances and economical goods. The series type active power filter injects compensation voltage into power system by transformers. It's compensation principle is able to applicate for voltage compensation. A new control algorithm for series active filter to compensate current harmonics and unbalanced source voltages is proposed. In the proposed algorithm, a compensation voltage for harmonic reduction is calculated directly by instantaneous reactive power theory, and a compensation voltage for unbalanced source voltage is calculated in based on a synchronous reference frame. By experiments, we show validity of proposed compensation method.

• Design Convergence Study
• /
• v.15 no.3
• /
• pp.171-186
• /
• 2016

With the continuous rise of elderly population and rapid progression of aging in our society, greater emphasis is placed on the importance of local seniors welfare centers as representative service space that meets the diverse needs of local residents. In addition, there is a growing tendency among current users to seek high-quality service as their educational level, economic ability and lifestyle have changed for the better compared to past generations. Accordingly, this study analyzed the satisfaction of senior welfare centers according to life-style type of the elderly, using a lifestyle measurement tool which incorporates indicators of gerontographics. A survey was conducted with users of seven senior welfare centers located in Seoul. Analysis results are as follows: First, four types of lifestyle were derived through cluster analysis; independent activity type, protective activity type, active challenge type, and passive challenge type. Second, it was found that the overall satisfaction of seniors welfare centers by the life-style of the elderly is highest for the protective activity type followed by the passive challenge type, the active challenge type, and the independent activity type. Third, upon examining the effect of spatial characteristics of welfare centers on the satisfaction of elderly users by type of lifestyle, it was found that the independent activity type and the passive challenge type users are most influenced by intimacy, the protective activity type users by comfort, and the active challenge type users by convenience.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.135-138
• /
• 2002

VCO(Voltage Controlled Oscillator) is one of the main components governing the size, performance and power consumption of telecommunication devices. As the devices become much smaller, VCO need to have much smaller size with better characteristics. Buried type passive components of L,C,R were developed previously and the structure of these components are good for minimizing the size of VCO. Our own library of passive components is used in simulation and fabrication of VCO circuit, and surface mounted components like varactor diode are analysed using the measurement circuit designed by ourselves. Two-Dimensional simulation of VCO circuit and local three-Dimensional structure simulation are performed and their relation is obtained. In structure of multi-layered VCO, some components governing the characteristics of VCO are selected and placed on the top of oscillator for the good tuning process. In resonator part, the stripline structure and low loss glass/ceramic material are used to get higher Q value. In our research, a VCO oscillates in the 2.3∼2.36 GHz band is developed.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.603-607
• /
• 2009

About a Structure is performance external insulation is fundamantal performance for enrgy-saving. these day, most of residential structures have constructed by internal insulation method structure. The method structure internal insulation have construction and economical efficiency, but on the other hand, be generated heat loss by heat bridge especially, be generated loss heat-energy logical consequence in structure ondol. The external insulation structure method has a mert able to minimum to loss heat about heat-bridge. But the external insulation technique is unsatisfactory statues within the know-how and method of construction and materials compared with developed countries. The recently, the requirement of market related to the external insulation technique is resulted by the energy efficiency system, but it can lead to the lack of alternative technique In study on the korea type passive house building design for insulation block method of wall system has to experimental characteristic heat-energy of practice building. In result field-experimental, the heat-bridge appeared to characteristic spent heat-energy of blow 2L class and have a suffience performance it.

• Journal of the Korean Chemical Society
• /
• v.58 no.1
• /
• pp.9-16
• /
• 2014

In a borate buffer solution, the growth kinetics and the electronic properties of passive film on nickel were investigated, using the potentiodynamic method, chronoamperometry, and single- or multi-frequency electrochemical impedance spectroscopy. The oxide film formed during the passivation process of nickel has showed the electronic properties of p-type semiconductor, which follow from the Mott-Schottky equation. It was found out that the passive film ($Ni(OH)_2$) of Ni formed in the low electrode potential changes to NiO and NiO(OH) while the electrode potential increases.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.100-107
• /
• 2001

The main goals of the automotive suspension systems are to isolate roadway unevenness from the tire and to improve vehicle stability. To overcome the performance limitation of the passive systems the active systems which completely replace the passive spring and damper elements with a force generating actuator has been studied. However, application of the system has been limited because it has required a significant amount of power. Recently, alternative systems which retain passive elements but include active elements have been developed to reduce the power required. Those systems are mostly focused on the control system which compresses the spring-damper directly. In this study, a new type of power efficient control system which makes the spring-damper unit slide in side way is studied. After constructing the control system including dynamic modeling and motion control, two types of alternative control systems are compared in view of power consumption and dynamic attitudes such as roll responses as well as heave responses. Also, a half car bond graph model is developed to show clearly the significant differences in performances between two control systems.