• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.3
• /
• pp.174-180
• /
• 2009

A new flexible electronics technology, named P-FCB (Planar Fashionable Circuit Board), is introduced. P-FCB is a circuit board technology implemented on the plain fabric patch for wearable electronics applications. In this paper, the manufacturing of P-FCB, and its electrical characteristics such as sheet resistance, maximum current density, and frequency characteristics are reported. The fabrication methods and their electrical characteristics of passive devices such as resistor, capacitor, and inductor in P-FCB are discussed. In addition, how to integrate silicon chip directly to the fabric for the flexible electronics system are described. Finally, examples of P-FCB applications will be presented.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1353-1360
• /
• 2004

The purpose of this study is to develop a cultural products design of korean image using fabrics. The study is carry out in literature research methods and make sample product. We examine existing researches about cultural product design development to understand developed items, materials, and design directions. The brainstorming method and the established literature researches were used to obtain the design components of Korean image. A cultural products design was developed into the decorative structural details. The results can be summarized as follows: Korean image is pure, passive, gentle, small, and lasting life-force at weeds and wild flowers. Korean form is rounded curve and soft silhouette as streamy, not exaggerate. Korean color is not a finishing treatment, non-dyed natural color, or pastel, light greyish, and dull tone. Korean textile is a natural materials as linen, ramie, and coarse silk. Final sample products are table supplies, home goods and bed goods applying the sewing method of tuck, quilting, top-stitching, patch work, applique and embroidery.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.306-309
• /
• 2004

This paper presents a new active antenna consisting of a microstrip patch for the passive radiator, a mixer for frequency conversion, a voltage controlled oscillator (VCO) and a phase detector for phase control. The microwave signal frequency has been converted into intermediate frequency (IF) on the antenna elements by the mixer. The active antenna consists of two ports, the IF port has a transmitted IF signal via power combined to the baseband and the dc control port is under the control of the phase-detector. The input voltage of the VCO is controlled by the phase detector. The scan range of the array is determined by the phase detector and the VCO and is obtained between 30$^{\circ}$ and - 30$^{\circ}$

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.311-315
• /
• 2002

The coupled finite/boundary element method is used in numerical analysis for acoustic radiation from the vibration of rectangular composite plate which is simply supported. This analysis is validated using the Wallace equation for an isotropic plate. Active control of sound fields has been carried out using 3 pairs of piezoelectric sensor/actuator and a pair of viscoelastic material by passive constrained layer damping treatment. The results show that the optimal placement of piezoelectric sensor/actuator and VE patch is required to control the sound fields from a vibrating composite plate.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.216-218
• /
• 2006

This letter presents the design for a low-profile planar inverted-F antenna (PIFA) that can be stuck to metallic objects to create a passive radio frequency identification (RFID) tag in the UHF band. The designed PIFA, which uses a dielectric substrate for the antenna, consists of a U-slot patch for size reduction, several shorting pins, and a coplanar waveguide feeding structure to easily integrate with an RFID chip. The impedance bandwidth and maximum gain of the tag antenna are about 0.3% at 914 MHz for a voltage standing wave ratio (VSWR) of less than 2 and 3.6 dBi, respectively. The maximum read range is about 4.5 m as long as the tag antenna is on a metallic object.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1001-1004
• /
• 2000

RFID system is applied to identify, locate and track people, cars, animals. In RFID system, the passive transponder without battery has some benefits than active transponder, such as no restriction in battery exchange and in battery’s life. But it needs auxiliary RF-DC conversion circuit. RF-DC conversion circuit originated from Wireless Power Transmission (WPT). In this paper, RF-DC conversion circuit consists of a microstrip patch antenna and impedance matching circuit, Cock-croft Walton circuit. And RF-DC conversion circuits have two kinds of T-type and Cross-type impedance matching circuits.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.1
• /
• pp.9-17
• /
• 2011

The objective of this work is to study transdermal delivery of calcitonin using iontophoresis and to evaluate various factors which affect the transdermal transport. We have studied the effect of polarity, current density, drug concentration, penetration enhancers (isopropyl myristate [IPM] and ethanol) and laser treatment on transdermal flux and the results were compared. We also investigated the iontophoretic flux from microemulsions containing calcitonin together with oleic acid (OA) or IPM. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. Anodal delivery at pH 3.0 was much larger than cathodal and passive delivery, due to the positive charge of calcitonin. Cumulative amount delivered (CUM) by cathodal or passive delivery was close to zero for 10 hours. The pretreatment of skin by neat IPM markedly increased the CUM anodically. CUM increased as the current density, drug concentration or the duration of IPM treatment increased. Microemulsion containing IPM or oleic acid was prepared and the phase diagram was constructed. CUM also increased when IPM was incorporated into a microemulsion. OA microemulsion showed similar enhancing effect to IPM microemulsion. The delivery of calcitonin from 70% (v/v) ethanol aqueous solution showed a large increase in flux. Laser treatment of skin before flux experiment exhibited about 2 fold increase in total calcitonin amount transported for 12 hours, when compared to that delivered by IPM microemulsion. Based on these results, we have evaluated the possibility of delivering enough amount of calcitonin to reach the therapeutic level. The data suggest that it is highly possible to deliver clinically effective amount of calcitonin using iontophoresis patch with small area (<10 $cm^2$).

• Journal of Pharmaceutical Investigation
• /
• v.40 no.2
• /
• pp.91-100
• /
• 2010

The objective of this work is to study transdermal delivery of donepezil hydrochloride (DH) using iontophoresis and to evaluate various factors which affect the transdermal transport. After the flux study using 4 kinds of hydrogel, hydrogel containing 8% poly(ethylene oxide) (PEO) was chosen as the hydrogel for further studies. Under experimental condition, DH was stable. We have studied the effect of polarity, current density, drug concentration and current profile on transdermal flux and compared the results. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. DH is positively charged at pH 7.4, and anodal delivery was much larger than cathodal and passive delivery at all current densities studied (0.2, 0.4 and 0.6 mA/$cm^2$). Cathodal delivery showed higher flux than passive flux. Flux increased as the concentration of DH in hydrogel increased. Pulsatile application of current showed smaller flux value than the application of continuous current. Based on these results, we have evaluated the possibility of delivering enough amount of DH to reach the therapeutic level. The maximum cumulative amount of DH transported for 12 hours was 455 ${\mu}g/cm^2{\cdot}hr$ when the amount of DH in the hydrogel was 3 mg/mL and the current density was 0.4 mA/$cm^2$. If the patch size is 10 $cm^2$, then we can deliver 4.6 mg for 12 hours. Because the daily dosage of DH is 5 mg, it seems possible to deliver clinically effective amount of DH using iontophoresis. This study also provides some information about the role of electrorepulsion and electroosmosis during the transport through skin.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2045-2049
• /
• 2018

An antenna arrays for a satellite navigation systems require more antenna elements to mitigate multiple jamming signals. In order to maintain the small array size while increasing the number of antenna elements, miniaturization technique is essential for antenna design. In this work, an electrically small circular microstrip patch antenna with a 3 dB hybrid coupler is designed as an element antenna, where the 3 dB hybrid coupler can yield the circularly polarized radiation characteristic. The miniaturized element antenna typically has too large capacitance in GPS L1 and GLONASS G1 bands, making it difficult to match with a single stand-alone non-Foster matching circuit (NFMC) in a stable state. Therefore, we propose a new matching technique, referred to as the hybrid matching method, which consists of a NFMC and a passive circuit. This passive tuning circuit manages reactance of antenna elements at an appropriate capacitance without a pole in the operating frequency range. The antenna array is fabricated, and the measured results show a reflection coefficient of less than -10 dB and an isolation of greater than 50 dB. In addition, peak gain of the proposed antenna is increased by 22.3 dB compared to the antenna without the hybrid matching network.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.223-246
• /
• 2015

Structural vibration control using a piezoelectric shunt is an established control technique. This technique involves connecting a piezoelectric patch, which is bonded onto or embedded into the vibrating structure, to an electric shunt circuit. Thus, vibration energy is converted into electrical energy and is dissipated through a network of electrical components. Different configurations of shunt have been researched, among which the negative capacitance-inductance shunt has gained prominence recently. It is basically an analog, active circuit consisting of operational amplifiers and passive elements to introduce real and imaginary impedance on the vibrating structure. The present study attempts to model the behavior of a negative capacitance-inductance shunt in terms of power output and efficiency using circuit modeling software. The shunt model is validated experimentally and is used to control the structural vibration of an aluminum beam, connected to a pair of piezoelectric patches, under broadband excitation. The model is also used to determine the optimal parameters of a negative capacitance-inductance shunt to increase the efficiency and predict the voltage output limit of op-amp against the supply voltage.