• 대한건축학회논문집:계획계
• /
• 제34권11호
• /
• pp.105-112
• /
• 2018

Global environmental problems are growing, and the importance of buildings with high energy consumption has been emphasized. In Korea, the Ministry of Land, Transport and Maritime Affairs has been promoting the mandatory zero energy building since 2020, and guidelines related to the zero energy building have been developed. In addition, based on the "Energy-saving Design Criteria for Buildings" of the "Green Building Promotion Act" in Korea, the standards for energy-saving design are specified and the energy saving plan is written. Besides, the 'Energy-saving construction standards for eco-friendly houses' also specify insulation, machinery, equipment, and sunshade. Also, there is little consideration about the cost such as construction cost and material cost which should be considered important in the construction stage. Therefore, this study aims at analysis of building type and energy performance versus materials for energy saving building design considering energy performance in planning aspect of initial design stage. In this study, because the variables can not be neglected in this study, it is selected as the lecture facility of the 'K' university campus building which can consider the remaining factors except the passive design element as the control variable, Energy performance analysis.

• Smart Structures and Systems
• /
• 제29권4호
• /
• pp.577-588
• /
• 2022

Oil refineries' Fluid Catalytic Cracking Units (FCCU) when in full operation may exhibit strong fluid dynamics caused by turbulent flow in the piping system that may induce vibrations in other mechanical and structural components of the Unity. This paper reports on the experimental-theoretical-computational program performed to get the vibration properties and the dynamic response amplitudes to find out alternative solutions to attenuate the excessive vibrations that were causing fatigue fractures in components of the bottle like reactor-regenerator of an FCC unit in operation in an existing oil refinery in Brazil. Solutions to the vibration problem were sought with the aid of a 3D finite element model calibrated with the results obtained from experimental measurements. A short description of the found solutions is given and their effectiveness are shown by means of numerical results. The solutions were guided by the concepts of structural stiffening and dynamic control performed by a nonlinear pendulum controller whose mechanical design was based on parameters determined by means of a parametric study carried out with 2D and 3D mathematical models of the coupled pendulum-structure system. The effectiveness of the proposed solutions is evaluated in terms of the fatigue life of critical welded connections.

• Structural Engineering and Mechanics
• /
• 제85권5호
• /
• pp.693-707
• /
• 2023

In order to deeply reveal the working mechanism of ultra-high performance concrete (UHPC) filled steel tubular columns (UHPCFSTs) under cyclic loading, a three-dimension (3D) macro-mesoscale finite element (FE) model was established considering the randomness of steel fibers and the damage of UHPC. Model correctness and reliability were verified based on the experimental results. Next, the whole failure process of UHPC reinforced with steel fibers, passive confinement effect and internal force distribution laws were comprehensively analyzed and discussed. Finally, a simplified and practical method was proposed for predicting the ultimate bending strengths of UHPCFSTs. It was found that the non-uniform confinement effect of steel tube occurred when the drift ratio exceeded 0.5%, while the confining stress increased then decreased afterwards. There was preferable synergy between the steel tube and UHPC until failure. Compared with experimental results, the ultimate bending strengths of UHPCFSTs were undervalued by the current code provisions such as AISC360-10, EC4 and GB50936 with computed mean values (MVs) of 0.855, 0.880 and 0.836, respectively. The proposed practical method was highly accurate, as evidenced by a mean value of 1.058.

• Geomechanics and Engineering
• /
• 제31권2호
• /
• pp.209-222
• /
• 2022

Finite element analyses using coupled Eulerian-Lagrangian technique are performed to investigate the effect of soil conditions on plugging of open-ended piles in sands. Results from numerical simulations are compared against the data from field load tests on three open-ended piles and show very good agreement. A parametric study focusing on determination of the coefficient of lateral earth pressure (K) in soil plug after pile driving are then performed for various soil densities, end-bearing conditions, and layering conditions. Results from the parametric study suggest that the K value in the soil plug - and hence the degree of soil plugging - increases with increasing soil densities. The analysis results further show that the K value within the soil plug can reach about 63 to 71% of the coefficient of passive earth pressure after pile driving. For layered soil profiles, the greater K values are achieved after pile driving when the denser soil layer is present near the pile base regardless of number of soil layers. This study provides comprehensive numerical and experimental data that can be used to develop advanced theory for analysis and design of open-ended pipe piles, especially for estimation of inner shaft resistance after pile driving.

• 수완나부미
• /
• 제6권2호
• /
• pp.65-84
• /
• 2014

Asia-Pacific Confucian Capitalism is comparable to Atlantic Protestant Capitalism in terms of economic success, as most economies influenced by Confucian culture in East Asia and Southeast Asia are economically well-off in the past 50 years, save for Vietnam. This paper seeks to determine whether Vietnam can follow the path of development of the other Confucian economies, especially in the context of globalization and upcoming regional integration. In the paper, I will use an analytic framework derived from Weber and Huntington to examine the cultural dimension of Vietnam's economic development. In the domestic field, I argue that the core values of Confucianism continue to contribute to the development in Vietnam in many ways; yet one critical element needs to be tapped: the political culture of strong leadership and efficient bureaucracy. Confucian values for development may be compromised by pushing for democratization too early in Vietnam. On a positive note, Confucianism for Vietnam is instrumental in its regional integration into Southeast Asia since it is integrative rather than exclusive. Vietnam's cultural similarity with China may however lead to too much passive learning and conflicts. In conclusion, Confucianism is a valuable asset for Vietnam's economic development, but challenges have to be addressed in order for Vietnam to become the next tiger.

• 대한치과보철학회지
• /
• 제47권4호
• /
• pp.365-375
• /
• 2009

연구목적: 임플란트 보철물의 유지형태 중 나사 및 시멘트 혼합 유지형의 경우 나사 풀림력 등에 영향을 주는 임플란트 구성 성분의 응력에 관한 연구가 부족하였다. 임플란트 상부 보철물의 유지형태, 즉, 시멘트 유지와 나사 유지, 그리고 이 두 가지 유지형태가 서로 연결된 혼합형의 임플란트 보철물의 응력분산의 특징들을 3차원 유한요소분석법을 이용하여 비교하고자 하였다. 연구재료 및 방법: 하악골에서 제1소구치 부위와 제1대구치 부위에 2개의 임플란트 (SS II, Osstem Co. Ltd., Seoul, Korea)를 식립한 가상의 3본 계속가공의치를 모델화하였다. 지대주 종류와 그 위치에 따라, 4가지 모형 군으로 나누어 실험하였다. 모형 1은제1대구치와 제1소구치 각각의 고정체에 모두 동일한 시멘트 유지형 지대주인 Comocta abutment (Osstem Co. Ltd) 를 장착하여 3본 계속가공의치를 합착시킨 경우이고, 모형 2는 제1대구치와 제1소구치 각각의 고정체에 모두 나사 유지형 지대주인 Octa abutment (Osstem Co. Ltd) 를 장착하여 3본 계속가공의치를 나사로 고정시킨 경우이며, 모형 3은 제1대구치의 고정체에는 시멘트 유지형 지대주인 Comocta abutment를 장착하고, 제1소구치에는 나사 유지형 지대주인 Octa abutment를 장착한 후 3본 계속가공의치를 각각 시멘트 합착 및 나사로 고정시킨 경우이다. 그리고 모형 4는 모형 3에서 각각 제1대구치 및 제1소구치의 지대주를 맞바꾼 후 3본 계속가공의치를 나사 및 시멘트로 고정시킨 경우로 나누었다. 평균저작압인 하중을 대구치 565 N과 소구치 288 N의 힘으로 설정하고 수직방향으로 중심와와 협측 교두정에, 그리고 $30^{\circ}$ 경사 하중을 협측 교두정 부위에 준 다음 골, 고정체, 지대주, 그리고 지대주 나사 등에 나타나는 von-Mises stress 양상을 평가하였다. 결과: 네 가지 모형 중 나사 유지형 지대주인 Octa abutment를 제1대구치와 제1소구치 부위에 사용한 모형 2가 전반적으로 가장 낮은 안정적인 응력 분포를 보였다. 네 가지 모형 모두 피질골 및 고정체에 미치는 응력 크기 및 분포는 거의 유사하며, 치조골에 작용하는 응력은 하중의 종류와 상관없이 주로 피질골에 집중되었다. 지대주, 지대주 나사, 그리고 보철물 나사 등에 미치는 응력 크기나 분포는 모형에 관계없이 나사 유지형인 경우가 시멘트 유지형인 경우에 비해 낮은 안정적인 값을 보였다. 제1대구치와 제1소구치의 상부 구조물의 차이에 의한 교호작용 (reciprocal action)은 상대적으로 약하였다. 모든 부위에서 중앙 수 직하중, 교두정 수직하중, 그리고 교두정 경사하중의 순으로 응력값이 증가하였다. 결론: 본 유한 요소실험의 한계내에서 나사 및 시멘트 혼합 유지형의 임플란트 보철물은 시멘트 유지형만 사용하는 경우와 비교하여 주위에 더 큰 응력을 나타내지는 않았다. 이상적인 passive fit의 가정하에서 나사 유지형의 임플란트 보철물이 본체와 주위에 가장 작은 응력을 나타내었다.

• Biomolecules & Therapeutics
• /
• 제21권4호
• /
• pp.299-306
• /
• 2013

In the present study, we investigated the effect of ethanolic extract of the seed of Zizyphus jujuba var. spinosa (EEZS) on cholinergic blockade-induced memory impairment in mice. Male ICR mice were treated with EEZS. The behavioral tests were conducted using the passive avoidance, the Y-maze, and the Morris water maze tasks. EEZS (100 or 200 mg/kg, p.o.) significantly ameliorated the scopolamine-induced cognitive impairment in our present behavioral tasks without changes of locomotor activity. The ameliorating effect of EEZS on scopolamine-induced memory impairment was significantly reversed by a sub-effective dose of MK-801 (0.0125 mg/kg, s.c.). In addition, single administration of EEZS in normal naive mouse enhanced latency time in the passive avoidance task. Western blot analysis was employed to confirm the mechanism of memory-ameliorating effect of EEZS. Administration of EEZS (200 mg/kg) increased the level of memory-related signaling molecules, including phosphorylation of extracellular signal-regulated kinase or cAMP response element-binding protein in the hippocampal region. Also, the time-dependent expression level of brain-derived neurotrophic factor by the administration of EEZS was markedly increased from 3 to 9 h. These results suggest that EEZS has memory-ameliorating effect on scopolamine-induced cognitive impairment, which is mediated by the enhancement of the cholinergic neurotransmitter system, in part, via NMDA receptor signaling, and that EEZS would be useful agent against cognitive dysfunction such as Alzheimer's disease.

• 한국광학회지
• /
• 제8권6호
• /
• pp.510-515
• /
• 1997

광모듈에서는 반도체소자와 광섬유간의 복잡한 정렬에 필요한 패키지비용이 제조단가의 많은 비중을 차지하고 있어 수동정렬방식으로 광정렬절차를 제거하여 패키지비용을 절감하는데 대한 많은 연구가 행해지고 있다. 본 연구에서는 단일 모드 광섬유와 레이저 및 광검출기를 수동적으로 광결합시킬 수 있는 실리콘 광학벤치를 제작하고 이를 사용하여 광송수신기용의 광부모듈을 제작하였다. 기판의 구조에 있어서 V-홈에 정렬된 광섬유와 플립칩 본딩되는 LD간의 위치 정밀도를 개선하기 위하여 V-홈 식각패턴과 자기정렬된 정렬마크와 솔더댐을 사용하고 레이저의 높이조절 및 열방출을 위하여 도금된 금 받침대를 도입하였다. 실리콘 광학벤치를 이용하여 수동정렬방식으로 조립된 송신기용 광부모듈은 평균 -11.75.+-.1,75 dB의 광결합효율을 나타내었고 수신기용 광부모듈은 평균 -35.0.+-.1.5 dBm의 수신감도를 나타내었다.

• 한국콘텐츠학회논문지
• /
• 제17권5호
• /
• pp.153-164
• /
• 2017

본 연구는 전시매체적 상이성에 따른 미적 경험을 비교하기 위해, 문헌연구와 <풍경으로 보는 인상주의전(展)(이하 인상주의전)>과 <모네, 빛을 그리다전(展)(이하 모네전)>의 사용자 경험에 대한 정량적 연구를 병행했다. 감상태도의 관점에서, 두 전시에서 공통적으로 두 가지의 지각방식이 공존했다. 인상주의전에서는 집중적 지각이 우세했고, 모네전에서는 분산적 지각이 높았지만, 모네전에서만 집중적 지각의 전시만족도 및 전시몰입도에 대한 영향력이 입증되었다. 관람객 역할 측면에서는 두 전시에서 공통적으로 수동적 역할에 대한 비중이 높았으며, 관람객 역할은 지각방식 뿐만 아니라 전시만족도 및 전시몰입도에 영향을 미치지 못했다. 인상주의전의 경우, 미적경험요소에 대한 평가가 높게 제시되었으며, 사전지식의 활용은 관람객의 역할에 긍정적인 영향력으로 작용했다. 본 연구를 통해 전통적인 예술작품에 익숙한 관람객들은 디지털 전시에 대해서도 수동적 역할을 취하면서 두 가지의 지각방식에 의존한다는 사실이 확인되었다. 결론적으로 디지털 기술을 통한 재매개는 전시의 매체적 상이성에 따른 감상태도 및 관람객 역할에 대한 이분법적 논리의 경계를 모호하게 만들었으며, 이로 인해 명화 기반의 디지털 전시는 전통적인 예술작품 및 디지털 미디어의 특성을 동시에 갖는다는 것이 주요 시사점이라 할 수 있다.

• 한국주거학회논문집
• /
• 제17권4호
• /
• pp.145-153
• /
• 2006

Ubiquitous space can be described as a combined space of physical space and digital space. Ubiquitous space possesses new possibilities by combining the two. The concept of ubiquitous home will bring new changes in residential space design. First of all, it makes possible for more convenient and secure home. It has to be developed along with city and town level changes as ubiquitous environment. Secondly, concept of extended space as an extension of living space becomes possible by linking with outside spaces. Thirdly, as consumer requirements for residential spaces will become more versatile by social changes, ubiquitous home can be a good means to meet these versatile consumer requirements by accommodating concept of multi-functional space and flexible space. It is quite important to predict user requirements in rapidly changing social environment and versatile personal inclinations. Instead of POE methodology which can analyze and evaluate in exiting types of designs, storytelling methodology can be used to predict and direct for future requirements of living. The methodology makes scenarios of space usage for future living and extracts design requirements for the living. The concept of intelligent space has to be introduced. It is different from digital home that only accomodate digital devices in space. In intelligent space, space itself has to be recognized as an identity that interacts human directly. Intelligent space recognize human requirements and control digital devices as a response. Multi-functional space is closely related with intelligent space that can changes for business, entertainments as well as for rests by user requirements instantly. Flexible space that also intends to meet requirements of mobility and versatility can be attained through the integration of digital technology into current physical mobile systems. Interaction design becomes integral part for ubiquitous space design along with physical design. For the residential space design, digital illiteracy has to be considered for interaction design. Instead of the concept of passive existence, space itself has to be recognized as active subsistence that reacts with human. Intuitive and natural interaction for human will be a key design element for space-human interface design.