• 천문학회보
• /
• 제36권1호
• /
• pp.64.1-64.1
• /
• 2011

MIRIS (Multipurpose Infra-Red Imaging System), is a small infrared space telescope which is being developed by KASI, as the main payload of Science and Technology Satellite 3 (STSAT-3). Two wideband filters (I and H) of the MIRIS enables us to study the cosmic infrared background by detecting the absolute background brightness. The narrow band filter for Paschen ${\alpha}$ emission line observation will be employed to survey the Galactic plane for the study of warm ionized medium and interstellar turbulence. The opto-mechanical design of the MIRIS is optimized to operate around 200K for the telescope, and the cryogenic temperature around 90K for the sensor in the orbit, by using passive and active cooling technique, respectively. The engineering and qualification model of the MIRIS has been fabricated and successfully passed various environmental tests, including thermal, vacuum, vibration and shock tests. The flight model was also assembled and is in the process of system optimization to be launched in 2012 by a Russian rocket. The mission operation scenario and the data reduction software is now being developed. After the successful mission of FIMS (the main payload of STSAT-1), MIRIS is the second Korean space telescope, and will be an important step towards the future of Korean space astronomy.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.122-129
• /
• 2015

Excessive overheating to a manual transmission clutch system under operating conditions can be considered the main reason of its performance degradation. The clutch system has to be ensured with its service life by showing that it passes the extreme tests called anti-fade test and hill start test in a certain design step. In general, design feedbacks from these kinds of the experiments are adapted to the system to enhance its performance. However, it usually takes much time and costs a lot due to the repetition of the tests. In this research, a process to calculate temperature of the clutch system was developed to determine whether the design can be passed the anti-fade test and hill start test in the design phase. The process incorporates many CAE techniques such as heat transfer analysis using 1D dynamic simulation method, system dynamics, CFD and parametric optimization. CFD is utilized to analyze 3-dimensional heat transfer of the clutch system and fluid dynamics of air in the clutch housing. The process was applied for the clutch systems in several vehicle models. The results was compared with those of the experiment. The applicability of the developed process was verified by comparing the predicted results with experimental results.

• 한국항공우주학회지
• /
• 제49권7호
• /
• pp.565-572
• /
• 2021

본 연구에서는 국방 분야에서 분리장치로 사용되고 있는 파이로 장치 중 장기간 보관된 폭발볼트의 성능 및 노화에 관한 연구를 수행하였다. 연구를 위해 약 10년간 무기체계에 탑재되어 있던 폭발볼트를 확보하였으며, AIAA Standard 및 MIL-STD를 기반으로 성능 및 수명 평가 절차를 수립하였다. 성능 평가를 위해 먼저 비기능 검사를 수행하여 외적인 변화나 고장이 발생하였는지 확인하였으며, 내부 회로 및 구조에 이상이 없는지 회로검사와 X-ray 검사를 수행하였다. 비기능 검사가 통과된 시료에 대해서 작동 확인을 위한 성능 시험을 실시하였다. 성능 시험을 통해 폭발볼트의 분리 여부 및 분리시간을 측정하였으며, 일부 시료의 경우 잔여 수명 및 연장 가능성을 확인하기 위해 고온저장시험 후 성능 시험을 실시하였다. 마지막으로 시험 결과와 아레니우스 모델을 바탕으로 잔여 수명 및 신뢰도를 예측하였으며, 수명에 따른 신뢰도를 확인하였다.

• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.591-597
• /
• 2021

본 논문에서는 전자파 방출을 줄이기 위해 필터나 디커플링 캐패시터를 사용하는 대신에 PCB 내의 칩 배치, 배선 모양 등을 변경하여 위험신호의 배선 길이와 귀환경로를 짧게 하는 EMC 고려 PCB 설계 기법을 제안하였다. 제안하는 기법에서는 PCB 상의 여러 가지 신호에 대해 신호속도를 계산하고, 신호속도가 가장 높은 위험신호에 대해 선로를 가능한 짧게 하도록 가장 먼저 칩의 위치를 선정하고 배선도 가장 먼저 수행해야 한다. 또 위험신호의 귀환경로에 불연속이 발생하지 않도록 설계하며 귀환경로의 기준이 되는 전원판과 접지판이 분할되어 있지 않도록 한다. CISPR-32, CISPR-25 등의 전자파 적합성 시험을 통과하지 못했던 차량용 블루투스 지향성 스피커에 이 기법을 적용하여 PCB를 재설계한 후 EMC 측정을 수행하였더니 해당 전자파 적합성 시험을 수월하게 통과할 수 있었다. 제안하는 기법은 EMC 특성이 중요한 전자기기에 유용하게 쓰일 수 있다.

• 의학교육논단
• /
• 제14권2호
• /
• pp.95-101
• /
• 2012

As North Korea passed from the Devotion (Jeongseong) movement to the black market (Jangmadang) system, the medical service system in that country was effectively destroyed. North Korean physicians who have successfully defected to South Korea (North Korean defector physicians, NKDPs) have experienced socio-economic hardships on their way to becoming incorporated into the South Korean medical system due to different medico- social cultures, different (English-based) medical terminology, and the clinical knowledge gap between North and South Korea. Since 2009, we have operated programs at the Seoul Medical Center to help NKDPs prepare for the South Korean medical licensing examination. These programs consist of clinical education at the medical center, personal mentoring, arrangement of educational programs at the medical college, mock tests at the consortium, and administrative aid. Looking forward, we hope to achieve the following: 1) More systematic support plans are needed involving medical education experts, field physicians, and experts on reunification. 2) An evaluation of defector physicians' current medical knowledge may provide information about the areas where supplementary education is most needed and the standards for certificating licenses. 3) In the short term, a customized glossary should be developed to assist defector physicians prepare for the examination. 4) To secure internships and residencies is the most important issue for further sustained training of NKDP physicians to become good clinicians after certification. Hopefully, this short report on the current ongoing educational course will lead to more extensive discussion.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.635-645
• /
• 2020

This research was conducted to achieve several objectives and focus research was based on financial behavior theory and prospect theory as grounded theory e.g., investigate the financial decision-making behavior between financial and real assets investment, and confirm the relationship existing between herding behavior and overconfidence factors to the level of loss and regret aversion, and financial literacy into real assets investment decisions. The study used 220 real estate auction respondents as investor samples at the State Assets and Auction Service Office Makassar, South Sulawesi, Indonesia. Data was collected through the use of a questionnaire consisting of 23 questions to measure the variables. Moreover, the research data passed through several feasibility tests like the inner and outer modeling by Partial Least Square - Structural equation model (PLS-SEM) while the hypotheses formulated were also tested to determine the magnitude of the variable relationship. Through the use of the direct and intervening test, loss and regret aversion variables have a positive and significant effect while financial literacy variables have no significant effect. There is a slight difference in the decision-making process for real assets and financial assets investors. Investment decision making behavior in the financial assets sector requires less complicated decisions compared to the decisions related to real assets investments.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.237-246
• /
• 1998

지금까지 알려진 의사난수 생성기에서는 혼합 합동 생성기, 승산 합동 생성기, 유니버셜 난수 생성기, 역함수 합동 생성기, 양의 역함수 난수 생성기 등 여러 가지가 있다. 이러한 의사난수 생성기에 대하여 각각 20, 40, 60, 80, 100개의 자료를 생성하여 유의수준(${\alpha}$) 0.1, 0.05, 0.01 기준으로 10,000번의 시행 과정을 통하여 난수의 특성인 일양성과 독립성을 만족하는지를 검정하였다.

• 한국전자파학회논문지
• /
• 제13권5호
• /
• pp.451-458
• /
• 2002

6-18 GHz 주파수대역에서 사용되는 흡수형의 SP3T 및 SP8T 스위치 모듈을 설계 및 제작하였다. 스위치 모듈에 사용된 MMIC 칩의 에피구조는 저 손실과 고 전력용으로 설계되었다. 최대입력전력은 SP3T 스위치 모듈이 2 W이고 SP8T 스위치 모듈이 1 W이다. 200 nsec의 고속 스위칭을 위한 구동회로를 모듈에 내장하였다. 모듈의 최대삽입손실은 SP3T 및 SP8T에 대해 각각 2.8 dB, 4.2 dB로 측정되었다. 입ㆍ출력포트간 분리도는 모두 55 dB 이상을 얻을 수 있었다. 두 스위치 모듈은 전자전 시스템에 적용하기 위한 관련 환경시험을 모두 통과하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권4호
• /
• pp.39-45
• /
• 2010

In order to treat paddy soils contaminated by Pb, Cd, and As near the abandoned mine, $H_2PO_4$ was used for stabilization of Pb ($PO_4$/Pb mole ratio of 2/1). In addition, $CaCO_3$ and $FeSO_4$ were used as stabilizers for treating Cd and As (2% w/w), respectively. Leaching tests were conducted with artificial rain in the column to assess the heavy metal stabilization efficiency. The mass of heavy metals in the effluents passed through the columns were analyzed. The remaining heavy metals in the soils were also analyzed as Korean soil standard method, phytoavailability test and sequential extraction test. Lead in the effluent was not detected when $H_2PO_4$ was used as a stabilizer. This result suggests that $H_2PO_4$ is efficient for Pb stabilization. In addition results of sequential extraction scheme suggest that heavy metals are present as residual forms which is not easily extracted.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.130-137
• /
• 2015

This study is about the controller development of the Electric Operating Cell(EOC) which will replace the Mechanical Operated Cell(MOC) of the vacuum circuit breaker which has been used in the power plant and the performance test for the developed controller. The controller developed through this study was manufactured considering the harsh installation environment and electrical condition of the power plant, and the controller performance certification test for confirming the product reliability was taken to know whether or not to withstand fully in various electrical and mechanical problems. Items for performance certification test were AC power frequency voltage withstand test, combined surge immunity test, 1 [MHz] oscillatory SWC test, fast transient SWC test, radiated electromagnetic interference test, vibration test. As a result, all tests has passed an examination without malfunction.